A new strategy for the preparation of mixed-mode chromatographic stationary phases based on modified dialdehyde cellulose

Recent advances in chiral liquid chromatography stationary phases for pharmaceutical analysis

Chirality is a common phenomenon in nature. Different enantiomers of chiral drug compounds have obvious differences in their effects on the human body. Therefore, the separation of chiral drugs plays an extremely important role in the safe utilization of drugs. High-performance liquid chromatography (HPLC) is an effective tool for the separation and analysis of compounds, in which the chromatographic packing plays a key role in the separation. Chiral pharmaceutical separation and analysis in HPLC rely on chiral stationary phases (CSPs). Thus, various CSPs are being developed to meet the needs of chiral drug separation and analysis. In this review, recent developments in CSPs, including saccharides (cyclodextrin, cellulose, amylose and chitosan), macrocycles (macrocyclic glycopeptides, pillar[n]arene and polyamide) and porous organic materials (metal-organic frameworks, covalent organic frameworks, and porous organic cages), for pharmaceutical analysis in HPLC were summarized, the advantages and disadvantages of various stationary phases were introduced, and their development prospects were discussed.

Dilute-and-shoot coupled to mixed mode liquid chromatography-tandem mass spectrometry for the analysis of persistent and mobile organic compounds in human urine

In this work, a comprehensive method for the simultaneous determination of 33 diverse persistent and mobile organic compounds (PMOCs) in human urine was developed by dilute-and-shoot (DS) followed by mixed-mode liquid chromatography coupled with tandem mass spectrometry (MMLC-MS/MS). In the sample preparation step, DS was chosen since it allowed the quantification of all targets in comparison to lyophilization. For the chromatographic separation, Acclaim Trinity P1 and P2 trimodal columns provided greater capacity for retaining PMOCs than reverse phase and hydrophilic interaction liquid chromatography. Therefore, DS was validated at 5 and 50 ng/mL in urine with both mixed mode columns at pH = 3 and 7. Regarding figures of merit, linear calibration curves (r2 > 0.999) built between instrumental quantification limits (mostly below 5 ng/mL) and 500 ng/mL were achieved. Despite only 60% of the targets were recovered at 5 ng/mL because of the dilution, all PMOCs were quantified at 50 ng/mL. Using surrogate correction, apparent recoveries in the 70-130% range were obtained for 91% of the targets. To analyse human urine samples, the Acclaim Trinity P1 column at pH = 3 and 7 was selected as a consensus between analytical coverage (i.e. 94% of the targets) and chromatographic runs. In a pooled urine sample, industrial chemicals (acrylamide and bisphenol S), biocides and their metabolites (2-methyl-4-isothiazolin-3-one, dimethyl phosphate, 6-chloropyridine-3-carboxylic acid, and ammonium glufosinate) and an artificial sweetener (aspartame) were determined at ng/mL levels. The outcomes of this work showed that humans are also exposed to PMOCs due to their persistence and mobility, and therefore, further human risk assessment is needed.

A Compendium of the Principal Stationary Phases Used in Hydrophilic Interaction Chromatography: Where Have We Arrived?

Hydrophilic interaction liquid chromatography (HILIC) today is a well-known and largely applied technique to analyse polar compounds such as pharmaceuticals, metabolites, proteins, peptides, amino acids, oligonucleotides, and carbohydrates. Due to the large number of stationary phases employed for HILIC applications, this review aims to help the reader in choosing a proper stationary phase, which often represents the critical point for the success of a separation. A great offer is present for achiral applications in contrast to the chiral phases developed for HILIC enantioseparations. In the last case, up-to-date solutions are presented.

Simulation of Adsorption Process of l-Tryptophan on Mixed-Mode Resin HD-1 with Combined Physical Adsorption and Ion Exchange

The mass-transfer process of l-tryptophan (l-Trp) in the hydrophobic interaction/ion-exchange mixed-mode resin HD-1 particles and fixed bed was studied experimentally and theoretically. The adsorption kinetics of l-Trp in single-component and multicomponent adsorption systems was investigated under different pH conditions. The co-adsorption of sodium ions (Na⁺) and l-Trp anions was found to be negligible. A modified liquid-film linear driving force model considering the physical adsorption of l-Trp zwitterions and anions as well as ion exchange of l-Trp cations was proposed. The dissociation equilibria of l-Trp molecules and functional groups on the resin were introduced in the model. The model could well fit the kinetic adsorption curves of l-Trp at different pH values. The presence of Na⁺ and the impurity amino acid l-glutamic acid (l-Glu) did not significantly affect the mass-transfer rate of l-Trp. The dynamic adsorption processes of l-Trp under different pH and concentration conditions were studied. A modified transport-dispersive model considering axial diffusion, liquid-film mass transfer, and a combined physical adsorption and ion-exchange equilibrium was established, which could predict the adsorption breakthrough curves of l-Trp well. During the dynamic adsorption process, the pH of mobile phase in the fixed bed changed with changing the l-Trp concentration in the mobile phase. l-Trp was well separated from Na⁺ and l-Glu with the purity of l-Trp higher than 99%, the recovery rate higher than 95%, and a concentration of 4.69 × 10^-3 mol/L. The elution chromatographic peaks of l-Trp, l-Glu, and Na⁺ and the pH of the outlet solution were predicted satisfactorily.

Adsorption separation of guanosine 5'-Monophosphate and cytidine 5'-Monophosphate by mixed-mode Resin HD-1: Experimental study and mathematical modeling

The preparative separation of guanosine 5'-monophosphate (GMP) and cytidine 5'-monophosphate (CMP) on mixed-mode resin HD-1 was experimentally and theoretically investigated. The adsorption mechanisms of the two nucleotides were elucidated by analyzing adsorption equilibria and kinetics at different pH values. The adsorption dynamics of GMP and CMP in a fixed bed packed with resin HD-1 were studied. All nucleotide monovalent cations, zwitterions, and monovalent anions were adsorbed by the resin. Further, a general adsorption isotherm model was developed by considering the adsorption of different nucleotide species and the dissociation equilibrium behaviors of resin ligands. The model fit the adsorption isotherm data of GMP and CMP well. A modified liquid-film linear driving force model with the combined physical adsorption of nucleotides in different dissociation states and ion exchange of Na⁺ was established. The dissociation equilibria of resin ligands and nucleotides were considered. The model satisfactorily predicted the adsorption kinetic data at different pH values. The values of the efficient diffusion coefficients for GMP and CMP were not significantly influenced by the solution pH. A modified transport-diffusion model with pH gradient elution was proposed. The model accurately predicted the elution chromatographic peaks of GMP and CMP, as well as the pH at the outlet of the fixed bed packed with resin HD-1.

Recent Developments of Liquid Chromatography Stationary Phases for Compound Separation: From Proteins to Small Organic Compounds

Compound separation plays a key role in producing and analyzing chemical compounds. Various methods are offered to obtain high-quality separation results. Liquid chromatography is one of the most common tools used in compound separation across length scales, from larger biomacromolecules to smaller organic compounds. Liquid chromatography also allows ease of modification, the ability to combine compatible mobile and stationary phases, the ability to conduct qualitative and quantitative analyses, and the ability to concentrate samples. Notably, the main feature of a liquid chromatography setup is the stationary phase. The stationary phase directly interacts with the samples via various basic mode of interactions based on affinity, size, and electrostatic interactions. Different interactions between compounds and the stationary phase will eventually result in compound separation. Recent years have witnessed the development of stationary phases to increase binding selectivity, tunability, and reusability. To demonstrate the use of liquid chromatography across length scales of target molecules, this review discusses the recent development of stationary phases for separating macromolecule proteins and small organic compounds, such as small chiral molecules and polycyclic aromatic hydrocarbons (PAHs).

A Survey of Polar Stationary Phases for Hydrophilic Interaction Chromatography and Recent Progress in Understanding Retention and Selectivity

Various polar stationary phases have become available for hydrophilic interaction chromatography (HILIC) and help drive continuous applications in biomedical, environmental and pharmaceutical areas in the past decade. Although the stationary phases for HILIC have been reviewed previously, it is an appropriate time to take another look at the progresses during the past five years. The current review provides an overview of the polar stationary phases commercially available for HILIC applications in an effort to assist scientists in selecting suitable columns. New types of stationary phase that were published in literature in the past five years are summarized and discussed. The trend in stationary phase research and development is also highlighted. Of particular interest is the experimental evidence for direct interactions of polar analytes with the ligands of the stationary phases under HILIC conditions. In addition, two different approaches have been developed to delineate the relative significance of the partitioning and adsorption mechanisms in HILIC, representing an important advancement in our understanding of the retention mechanisms in HILIC.

The separation characteristics and performance evaluation of the silica-based poly(pentabromostyrene) stationary phase in capillary electrochromatography

A mixed-mode capillary column packed with silica-based poly(pentabromostyrene) particles (denoted as SiO₂@pPBS) was prepared and applied to capillary electrochromatography (CEC) separation. With the presence of benzene rings and bromine atoms in polymer chains, the SiO₂@pPBS column provides a reversed-phase/hydrophilic mixed-mode retention mechanism owing to hydrophilic, hydrophobic and π-π interactions between the stationary phase and various analytes, including alkylbenzenes, polycyclic aromatic hydrocarbons, nucleosides, phenols and anilines. In CEC mode, the separation behavior of charged solutes is not only related to the interaction with the stationary phase, but also influenced by electrophoretic effects, which may lead to different selectivities compared to high performance liquid chromatography (HPLC). A column efficiency of up to 1.22 × 10⁵ N m^-1 was achieved for p-chloroaniline. Besides, the RSDs of retention time of anilines for run to run (n = 5), day to day (n = 5) and column to column (n = 3) were all less than 4.4%. Finally, the SiO₂@pPBS capillary column was applied to the separation of coking wastewater with satisfactory results. All the results demonstrated that the SiO₂@pPBS capillary packed column with RP/HILIC mixed-mode has great application potential.

Cyclodextrin-dendrimers nanocomposites functionalized high performance liquid chromatography stationary phase for efficient separation of aromatic compounds

In this work, novel cyclodextrin-dendrimers nanocomposites functionalized high performance liquid chromatography stationary phases were developed for efficient separation of aromatic compounds. β-cyclodextrin was grafted onto the surface of silica gel matrix with poly (amidoamine) dendrimers as spacers. Scanning electron microscope, fourier transform infrared spectroscopy, element analysis and Brunner-Emmet-Teller measurement proved the successful grafting of cyclodextrin-dendrimers nanocomposites. The obtained stationary phases showed satisfactory separation effects for alkylbenzenes and benzenesulfonic acid substituents in reverse phase liquid chromatography mode. Weak hydrophilic and ion exchange interactions were also confirmed at the same time. Meanwhile, the effects of dendrimers and cyclodextrin on the chromatography performance were discussed. Separation mechanism of the stationary phases were verified by two-dimensional nuclear magnetic resonance technology, and the result implied that the proposed cyclodextrin-dendrimers nanocomposites functionalized stationary phases have significant prospects for separation and determination of more aromatic compounds in future.

Layer-by-layer coating and chemical cross-linking of multilayer polysaccharides on silica for mixed-mode HPLC application

A facile, controllable and environmentally friendly method for fabricating a novel polysaccharide-silica composite stationary phase (SiO₂@(HA-CS)₁₂) was developed in this report. Two natural polysaccharides (hyaluronan acid and chitosan) were controllably coated on the silica surface using a layer-by-layer assembly technique, and then the polysaccharide shell was chemically cross-linked to improve the stability. The column efficiency of the SiO₂@(HA-CS)₁₂ column reached 74 000 plates per m in HILIC mode and 20 100 plates per m in IEC mode, which indicates great potential for separating polar and charged samples.

Comparison of chromatographic performance of co-grafted silica using octadecene respectively with vinylpyrrolidone, vinylimidazole and vinylpyridine

Three reversed-phase liquid chromatography (RPLC) stationary phases were obtained by using long-chain 1-octadecene (OD) co-grafted with three short-chain monomers, including N-vinylpyrrolidone (NVP), 1-vinylimidazole (VIm) and 4-vinylpyridine (VPy), respectively (noted as Sil@ODNVP, Sil@ODVIm and Sil@ODVPy). Peak broadening phenomenon in RPLC mode which resulted by short-chain was examined carefully. Compared with Sil@ODNVP, both of Sil@ODVIm and Sil@ODVPy had smaller peak width and higher column efficiency in the separation of 10 polycyclic aromatic hydrocarbons (PAHs), 7 alkyl benzenes, 7 aromatic acids, 7 aromatic esters and 9 phenols. In addition, VPy has the strongest ion exchange capacity than other two short-chains. In this case, we can see that VPy and VIm maybe more suitable to be used as functional monomeric modifiers of new chromatographic stationary phases.

Recent progress in the development of chiral stationary phases for high-performance liquid chromatography

Separations and analyses of chiral compounds are important in many fields, including pharmaceutical production, preparation of chemical intermediates, and biochemistry. High-performance liquid chromatography using a chiral stationary phase is regarded as one of the most valuable methods for enantiomeric separation and analysis because it is highly efficient, is broadly applicable, and has powerful separation capability. The focus for development of this method is the identification of novel chiral stationary phases with superior recognition performance and good stability. The present article reviews recent progress in the development of new chiral stationary phases for high-performance liquid chromatography between January 2018 and June 2021. These newly reported chiral stationary phases are divided into three categories: small organic molecule-based (cyclodextrin and its derivatives, macrocyclic antibiotics, cinchona alkaloids, and other low molecular weight chiral molecules), macromolecule-based (cellulose and amylose derivatives, chitin and chitosan derivatives, and synthetic helical polymers) and chiral porous material-based (chiral metal-organic frameworks, chiral covalent organic frameworks, and chiral inorganic mesoporous silicas). Each type of chiral stationary phase is discussed in detail.

N-Vinyl pyrrolidone and undecylenic acid copolymerized on silica surface as mixed-mode stationary phases for reversed-phase and hydrophilic interaction chromatography

In this work, three new mixed-mode stationary phases were prepared, based on different ratio of N-vinyl pyrrolidone (NVP) copolymerized together with undecylenic acid (UA) on silica microspheres surface without silanization, which named Sil@NVPUA series. The combination of NVP and UA rendered the Sil@NVPUA suitable for reversed-phase liquid chromatography (RPLC) and hydrophilic interaction liquid chromatography (HILIC), and shown excellent methyl, planar, isomers and ion selectivity. Five types of model analytes including eight polycyclic aromatic hydrocarbons, six alkylbenzenes, eight nucleosides and nucleobases, seven ginsenosides and five oxazolidinones can be well separated on this stationary phase. The preparation method of NVP and UA modified silica-based stationary phase is simple, and it also provides a new idea for the design of synthetic polymers to develop mixed-mode chromatography.

Polysaccharide- and β-Cyclodextrin-Based Chiral Selectors for Enantiomer Resolution: Recent Developments and Applications

Polysaccharides, oligosaccharides, and their derivatives, particularly of amylose, cellulose, chitosan, and β-cyclodextrin, are well-known chiral selectors (CSs) of chiral stationary phases (CSPs) in chromatography, because they can separate a wide range of enantiomers. Typically, such CSPs are prepared by physically coating, or chemically immobilizing the polysaccharide and β-cyclodextrin derivatives onto inert silica gel carriers as chromatographic support. Over the past few years, new chiral selectors have been introduced, and progressive methods to prepare CSPs have been exploited. Also, chiral recognition mechanisms, which play a crucial role in the investigation of chiral separations, have been better elucidated. Further insights into the broad functional performance of commercially available chiral column materials and/or the respective newly developed chiral phase materials on enantiomeric separation (ES) have been gained. This review summarizes the recent developments in CSs, CSP preparation, chiral recognition mechanisms, and enantiomeric separation methods, based on polysaccharides and β-cyclodextrins as CSs, with a focus on the years 2019-2020 of this rapidly developing field.

Modern Trends in Mixed-Mode Liquid Chromatography (LC) Columns

Commercialization of columns that provide multiple modes of chromatographic separations have recently been on the rise. For example, combinations of retention modes, such as ion-exchange and reversed-phase, often enable the separation of complex mixtures of analytes not possible using single-mode columns. In this work, recent trends in what is often referred to as “mixed-mode” phase are investigated. Particular attention is paid to recent fundamental research, stationary phase development and design, and areas of application.

Preparation and evaluation a mixed-mode stationary phase with C18 and 2-methylindole for HPLC

A modified C₁₈ column (Silpr-2MI-C18) was prepared using 2-methylindole and C₁₈ reagent. The extent of C₁₈ hydrocarbon chain, conjugative rings and anion exchange site provided multiple retention mechanisms, including reversed-phase liquid chromatography (RPLC), π-π interaction, hydrophilic interaction liquid chromatography (HILIC) and anion exchange chromatography (AEC). The separation of protected amino acids was investigated on the commercial C₁₈ and Silpr-2MI-C18 columns, while the chromatographic conditions, including methanol content and pH of the mobile phase, were studied. The separation arrangement of the hydrophilic amino acids was different on the Silpr-2MI-C18 column compared to the commercial C₁₈ column under RPLC mode. Furthermore, these amino acids were separated on the Silpr-2MI-C18 column under HILIC mode. The modified C₁₈ column was employed to separate amino acids, alkylbenzenes and polycyclic aromatic hydrocarbons under RPLC mode and inorganic anion under AEC mode. The results confirm that this new stationary phase of RPLC/HILIC/AEC has multiple interactions with different analytes. Effective retention of biological samples was found on the Silpr-2MI-C18 column by comparing the results obtained from the commercial C₁₈ column.

Silica modification with 9-methylacridine and 9-undecylacridine as mixed-mode stationary phases in HPLC

In this research, 9-methylacridine and 9-undecylacridine were synthesized through Bernthsen's reaction and well characterized using gas chromatography-mass spectrometry (GC-MS) and nuclear magnetic resonance (NMR). Two mixed-mode stationary phases were developed by functionalizing silica with 9-methylacridine and 9-undecylacridine. Then, two modified silicas were characterized by elemental analysis, thermogravimetric analysis (TGA), and fourier transform-infrared spectroscopy (FT-IR). Due to the extent of conjugative rings, the hydrophobic hydrocarbon chain, and anion exchange sites of 9-methylacridinium and 9-undecylacridinium group on the silica gel of columns, mixed-mode stationary phases were designed with multiple interactions including π-π stacking interaction, reverse phase, hydrophilic interaction, and anion exchange. According to the type of acridine, different interactions may be formed in the target column. Polycyclic aromatic hydrocarbons (PAHs), alkylbenzenes, pyridines and parabens were chromatographed on π-π stacking modes and RPLC, where anion exchange sites can be applied for the separation of inorganic anions on AEC mode. Considering the structure of the stationary phases, these columns were used to separate organic compounds with higher polarity on the HILIC retention. The performance of the columns was investigated by the chromatographic parameters in terms of column efficiency (N/m), asymmetry factor (A_f), retention factor (k), and resolution (Rs). The mixed-mode stationary phases can be successfully employed to conduct chromatographic separation on a wide range of samples with a single column.

MOF-74@SiO2 core-shell stationary phase: Preparation and its applications for mixed-mode chromatographic separation

The development of versatile mixed-mode stationary phase materials is of important meanings for solving the increasing demands for real sample analysis. Herein, with 2,5-dihydroxyterephthalic acid as the organic ligand and nickel as the metal centre, MOF-74 nanocrystal materials were facilely grafted on the surface of carboxyl-functionalized silica gel via layer-by-layer assembling technique. The structures of the monodisperse MOF-74@SiO₂ material were proved by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, elemental analysis, thermogravimetric analysis, and Brunauer-Emmett-Teller specific surface area and pore size analyzer, respectively. Because the introduced 2,5-dihydroxyterephthalic acid is of hydrophilic carboxyl and hydroxyl groups, the packed MOF-74@SiO₂ column reveals hydrophilic interaction/reversed-phase mixed-mode retention properties. Compared with commercial C₈ column or silica-based column, the MOF-74@SiO₂ column shows distrinct separation selectivity in short separation time for polycyclic aromatic hydrocarbons, phenolic compounds and polar sulfonamide compounds. The developed MOF-74@SiO₂ column was further successfully applied for the separation and detection of illegal addition of glucocorticoid in children's face cream as well as sulfonamides veterinary drug residues in pure milk. The research provides a simple and convenient approach to prepare multifunctional MOFs-based stationary phase materials.