High-performance liquid chromatographic enantioseparation of isopulegol-based ß-amino lactone and ß-amino amide analogs on polysaccharide-based chiral stationary phases focusing on the change of the enantiomer elution order

High-performance liquid chromatographic enantioseparation of azole analogs of monoterpene lactones and amides focusing on the separation characteristics of polysaccharide-based chiral stationary phases

High-performance liquid chromatography-based enantioseparation of newly prepared azole analogs of monoterpene lactones and amides was studied. Effects of additives and mobile phase composition were evaluated both in normal and polar organic modes. Applying amylose tris-(3,5-dimethylphenylcarbamate) selector in normal and polar organic modes acid and base additives were found to affect the peak profiles, without significantly influencing the enantiorecognition ability of the studied selector. In most cases, differences observed in retention times and enantioselectivities were lower than 10 and 20 % under normal phase and polar organic conditions, respectively. Under normal phase conditions decreased retention was observed for all the studied analytes with increased eluent polarity. Interestingly, enantioselectivity was only slightly (<10 %) influenced by the variation in the n-hexane/2-propanol ratio between 80/20 and 20/80 v/v. In polar organic mode, five different neat solvents (acetonitrile, methanol, ethanol, 1-propanol, and 2-propanol) were tested, and the best results were obtained with acetonitrile and ethanol in the case of Lux Amylose-1 column with enantioresolutions most often above 2. Based on results obtained with amylose and cellulose-based columns the amylose tris-(3,5-dimethylphenylcarbamate) selector is found to offer a superior performance both in normal and polar organic modes. When evaluating the possible effects of the selector immobilization, no striking differences were found in the normal phase. Usually, enantioselectivities and resolutions were higher (10-20 %), while retention factors of the first peaks were lower (20-30 %), on the coated-type column. In contrast, in polar organic mode, the retention characteristics and enantiorecognition ability of the coated and immobilized selectors were heavily affected by the nature of the polar solvent. Special attention has been paid to the history-dependent behavior of polysaccharide-based selectors. A confidence interval-based evaluation is suggested to help comparison of the histereticity observed in different systems. Several examples are shown to confirm that the recently discovered hysteresis is a common characteristic of polysaccharide-based selectors.

Unravelling dispersion forces in liquid-phase enantioseparation. Part I: Impact of ferrocenyl versus phenyl groups

BACKGROUND

Highly ordered chiral secondary structures as well as multiple (tunable) recognition sites are the keys to success of polysaccharide carbamate-based chiral selectors in enantioseparation science. Hydrogen bonds (HBs), dipole-dipole, and π-π interactions are classically considered the most frequent noncovalent interactions underlying enantioselective recognition with these chiral selectors. Very recently, halogen, chalcogen and π-hole bonds were also identified as interactions working in polysaccharide carbamate-based selectors to promote enantiomer distinction. On the contrary, the function of dispersion interactions in this field was not explored so far.

RESULTS

The enantioseparation of chiral ferrocenes featuring chiral axis or chiral plane as stereogenic elements was performed by comparing five polysaccharide carbamate-based chiral columns, with the aim to identify enantioseparation outcomes that could be reasonably determined by dispersion forces, making available a reliable experimental data set for future theoretical studies to confirm the heuristic hypothesis. The effects of mobile phase polarity and temperature on the enantioseparation were considered, and potential recognition sites on analytes and selectors were evaluated by electrostatic potential (V) analysis and molecular dynamics (MD). In this first part, the enantioseparation of 3,3'-dibromo-5,5'-bis-ferrocenylethynyl-4,4'-bipyridine bearing two ferrocenylethynyl units linked to an axially chiral core was performed and compared to that of the analyte featuring the same structural motif with two phenyl groups in place of the ferrocenyl moieties. The results of this study showed the superiority of the ferrocenyl compared to the phenyl group, as a structural element favouring enantiodifferentiation.

SIGNIFICANCE AND NOVELTY

Even if dispersion (London) forces have been envisaged acting in liquid-phase enantioseparations, focused studies to explore possible contributions of dispersion forces with polysaccharide carbamate-based selectors are practically missing. This study allowed us to collect experimental information that support the involvement of dispersion forces as contributors to liquid-phase enantioseparation, paving the way to a new picture in this field.

Chiral separation of oxazolidinone analogues by liquid chromatography on polysaccharide stationary phases using polar organic mode

The enantioseparation of four oxazolidinone and one biosimilar thiazolidine derivatives was performed on seven different polysaccharide-type chiral stationary phases (Lux Amylose-1, Lux i-Amylose-1, Lux Amylose-2, Lux Cellulose-1, Lux Cellulose-2, Lux Cellulose-3, Lux Cellulose-4) differing in backbone (cellulose or amylose), substituent or the immobilization technologies (coated or immobilized). Polar organic mode was employed using neat methanol (MeOH), ethanol (EtOH), 2-propanol (IPA) and acetonitrile (ACN) either alone or in combinations as mobile phases. Amylose-based columns with ACN provided the highest enantioselectivities for the studied compounds. The replacement of an oxygen with a sulfur atom in the backbone of the studied analytes significantly alters the enantiomer recognition mechanism. Chiral selector-, mobile-phase-, and interestingly immobilization-dependent enantiomer elution order reversal was also observed. Reversal of elution order and hysteresis of retention and enantioselectivity was further investigated using different mixtures of IPA:MeOH and ACN:MeOH on amylose-type chiral stationary phases. Hysteresis of retention and enantioselectivity was observed on all investigated amylose-type columns and binary eluent mixtures, which can be further utilized for fine-tuning chiral separation performance of the studied columns.

Polysaccharide- and β-Cyclodextrin-Based Chiral Selectors for Enantiomer Resolution: Recent Developments and Applications

Polysaccharides, oligosaccharides, and their derivatives, particularly of amylose, cellulose, chitosan, and β-cyclodextrin, are well-known chiral selectors (CSs) of chiral stationary phases (CSPs) in chromatography, because they can separate a wide range of enantiomers. Typically, such CSPs are prepared by physically coating, or chemically immobilizing the polysaccharide and β-cyclodextrin derivatives onto inert silica gel carriers as chromatographic support. Over the past few years, new chiral selectors have been introduced, and progressive methods to prepare CSPs have been exploited. Also, chiral recognition mechanisms, which play a crucial role in the investigation of chiral separations, have been better elucidated. Further insights into the broad functional performance of commercially available chiral column materials and/or the respective newly developed chiral phase materials on enantiomeric separation (ES) have been gained. This review summarizes the recent developments in CSs, CSP preparation, chiral recognition mechanisms, and enantiomeric separation methods, based on polysaccharides and β-cyclodextrins as CSs, with a focus on the years 2019-2020 of this rapidly developing field.

Enantioseparations of polyhalogenated 4,4'-bipyridines on polysaccharide-based chiral stationary phases and molecular dynamics simulations of selector-selectand interactions

2'-(4-Pyridyl)- and 2'-(4-hydroxyphenyl)-TCIBPs (TCIBP = 3,3',5,5'-tetrachloro-2-iodo-4,4'-bipyridyl) are chiral compounds that showed interesting inhibition activity against transthyretin fibrillation in vitro. We became interested in their enantioseparation since we noticed that the M-stereoisomer is more effective than the P-enantiomer. Based thereon, we recently reported the enantioseparation of 2'-substituted TCIBP derivatives with amylose-based chiral columns. Following this study, herein we describe the comparative enantioseparation of both 2'-(4-pyridyl)- and 2'-(4-hydroxyphenyl)-TCIBPs on four cellulose phenylcarbamate-based chiral columns aiming to explore the effect of the polymer backbone, as well as the nature and position of substituents on the side groups on the enantioseparability of these compounds. In the frame of this project, the impact of subtle variations of analyte and polysaccharide structures, and mobile phase (MP) polarity on retention and selectivity was evaluated. The effect of temperature on retention and selectivity was also considered, and overall thermodynamic parameters associated with the analyte adsorption onto the CSP surface were derived from van 't Hoff plots. Interesting cases of enantiomer elution order (EEO) reversal were observed. In particular, the EEO was shown to be dependent on polysaccharide backbone, the elution sequence of the two analytes being P-M and M-P on cellulose and amylose tris(3,5-dimethylphenylcarbamate), respectively. In this regard, a theoretical investigation based on molecular dynamics (MD) simulations was performed by using amylose and cellulose tris(3,5-dimethylphenylcarbamate) nonamers as virtual models of the polysaccharide-based selectors. This exploration at the molecular level shed light on the origin of the enantiodiscrimination processes.

Enantioseparation of 5,5'-Dibromo-2,2'-Dichloro-3-Selanyl-4,4'-Bipyridines on Polysaccharide-Based Chiral Stationary Phases: Exploring Chalcogen Bonds in Liquid-Phase Chromatography

The chalcogen bond (ChB) is a noncovalent interaction based on electrophilic features of regions of electron charge density depletion (σ-holes) located on bound atoms of group VI. The σ-holes of sulfur and heavy chalcogen atoms (Se, Te) (donors) can interact through their positive electrostatic potential (V) with nucleophilic partners such as lone pairs, π-clouds, and anions (acceptors). In the last few years, promising applications of ChBs in catalysis, crystal engineering, molecular biology, and supramolecular chemistry have been reported. Recently, we explored the high-performance liquid chromatography (HPLC) enantioseparation of fluorinated 3-arylthio-4,4′-bipyridines containing sulfur atoms as ChB donors. Following this study, herein we describe the comparative enantioseparation of three 5,5′-dibromo-2,2′-dichloro-3-selanyl-4,4′-bipyridines on polysaccharide-based chiral stationary phases (CSPs) aiming to understand function and potentialities of selenium σ-holes in the enantiodiscrimination process. The impact of the chalcogen substituent on enantioseparation was explored by using sulfur and non-chalcogen derivatives as reference substances for comparison. Our investigation also focused on the function of the perfluorinated aromatic ring as a π-hole donor recognition site. Thermodynamic quantities associated with the enantioseparation were derived from van’t Hoff plots and local electron charge density of specific molecular regions of the interacting partners were inspected in terms of calculated V. On this basis, by correlating theoretical data and experimental results, the participation of ChBs and π-hole bonds in the enantiodiscrimination process was reasonably confirmed.