Identification of chemicals in a polyvinyl chloride/polyethylene multilayer film by ultra-high-performance liquid chromatography/quadrupole time-of-flight mass spectrometry and their migration into solution

Recent Advances in Non-Targeted Screening of Compounds in Plastic-Based/Paper-Based Food Contact Materials

Ensuring the safety of food contact materials has become a pressing concern in recent times. However, detecting hazardous compounds in such materials can be a complex task, and traditional screening methods may not be sufficient. Non-targeted screening technologies can provide comprehensive information on all detectable compounds, thereby supporting the identification, detection, and risk assessment of food contact materials. Nonetheless, the non-targeted screening of food contact materials remains a challenging issue. This paper presents a detailed review of non-targeted screening technologies relying on high-resolution mass spectrometry for plastic-based and paper-based food contact materials over the past five years. Methods of extracting, separating, concentrating, and enriching compounds, as well as migration experiments related to non-targeted screening, are examined in detail. Furthermore, instruments and devices of high-resolution mass spectrometry used in non-targeted screening technologies for food contact materials are discussed and summarized. The research findings aim to provide a theoretical basis and practical reference for the risk management of food contact materials and the development of relevant regulations and standards.

Authentication of recycled and virgin polyethylene terephthalate based on UPLC-Q-TOF-MS using non-volatile organic compounds and chemometrics

Plastic packaging waste, such as polyethylene terephthalate (PET) has increased significantly in recent decades, arousing a considerable and serious public concern regarding the environment, economy, and policy. Plastic recycling is a useful tool to mitigate this issue. Here, a feasible study was performed to investigate the potential of a novel method for identifying virgin and recycled PET. Ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS) was combined with various chemometrics, as a simple and reliable method that achieved a high discrimination rate for 105 batches of virgin PET (v-PET) and recycled PET (r-PET) based on 202 non-volatile organic compounds (NVOCs). Making use of orthogonal partial least-squares discrimination analysis (OPLS-DA) together with non-parametric tests, 26 marker compounds (i.e. 12 intentionally added substances (IAS) and 14 non-intentionally added substances (NIAS) as well as 31 marker compounds (i.e. 11 IAS and 20 NIAS) obtained from positive and combination of positive and negative ionization modes of UPLC-Q-TOF-MS, respectively, were successfully identified. Moreover, 100% accuracy was obtained using a decision tree (DT). Cross-discrimination based on misclassified samples using various chemometrics allowed the prediction accuracy to be improved and to identify a large sample set, thus greatly enhancing the application scope of this method. The possible origins of these detected compounds can be the plastic itself, as well as contamination from food, medicine, pesticides, industry-related substances, and degradation and polymerization products. As many of these compounds are toxic, especially those pesticide related, this indicates an urgent requirement for closed loop recycling. Overall, this analytical method provides a quick, accurate, and robust way to distinguish virgin from recycled PET and thus addresses the issue of potential virgin PET adulteration thereby detecting fraud in the area of PET recycling.

Target and Nontarget Screening of Organic Chemicals and Metals in Recycled Plastic Materials

Increased demand for recycling plastic has prompted concerns regarding potential introduction of hazardous chemicals into recycled goods. We present a broad screening of chemicals in 21 plastic flake and pellet samples from Canadian recycling companies. From target analysis, the organophosphorus ester flame retardants and plasticizers exhibited the highest detection frequencies (DFs) (5-100%) and concentrations (<DL-4,700 ng/g), followed by brominated/chlorinated flame retardants (<DL-2,150 ng/g, 5-76% DFs). The perfluoroalkyl acids were least detected at the lowest concentrations (<0.01-0.70 ng/g, 5-19% DFs). Using nontargeted analysis, 217 chemicals were identified as Level 1 (authentic standard) or 2 (library match), with estimated individual concentrations up to 1030 ng/g (highest: 2-hexyl hydroxy benzoate, 100% DF). Total (Σ60) element concentrations were between 0.005 and 2,980 mg/kg, with highest concentrations for calcium (2,980 mg/kg), sodium (617 mg/kg), and iron (156 mg/kg). Collectively >280 chemicals were detected in recycled plastic pellets and flakes, suggesting potential incorporation into recycled goods. Individual concentrations indicate unintentional trace contamination following European Union threshold limits for recycled granules (500 mg/kg) and waste plastic flakes (1,000 mg/kg), although do not reflect toxicological thresholds, if any. Our study highlights that while recycling addresses sustainability goals, additional screening of goods and products made from recycled plastics is needed to fully document potentially hazardous chemicals and exposure.

Survival of SARS-CoV-2 and bovine coronavirus on common surfaces of living environments

Aerosols or saliva containing severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can contaminate living environments, and viruses can be indirectly transmitted. To understand the survival potential of the virus, the viral titers of bovine coronavirus (BCoV), as a model virus, and SARS-CoV-2 were measured on porous and non-porous surfaces. The amount of infectious BCoV recovered remained relatively high on non-porous substrates. However, it quickly decreased on several non-porous surfaces such as nitrile rubber. The time taken to reach the limit of detection on non-woven masks, as a porous substrate, was longer than that of non-porous substrates. On porous substrates other than non-woven masks, the amount of virus recovered quickly decreased, and then remained at a low level. Representative substrates were tested with SARS-CoV-2. The decrease in the amount of infectious virus recovered was similar to that of BCoV, although that of SARS-CoV-2 was more rapid. RNA derived from SARS-CoV-2 was also detected using real-time PCR, and it remained on surfaces much longer than infectious virus, on all substrates. Therefore, it is important to measure the viral titer to avoid the overestimation of infectious virus contamination in the environments. Our results suggest that the surface structure was not directly related to viral survivability.

Safety of Plastic Food Packaging: The Challenges about Non-Intentionally Added Substances (NIAS) Discovery, Identification and Risk Assessment

Several food contact materials (FCMs) contain non-intentionally added substances (NIAS), and most of the substances that migrate from plastic food packaging are unknown. This review aimed to situate the main challenges involving unknown NIAS in plastic food packaging in terms of identification, migration tests, prediction, sample preparation, determination methods and risk assessment trials. Most studies have identified NIAS in plastic materials as polyurethane adhesives (PU), polyethylene terephthalate (PET), polyester coatings, polypropylene materials (PP), multilayers materials, plastic films, polyvinyl chloride (PVC), recycled materials, high-density polyethylene (HDPE) and low-density polyethylene (LDPE). Degradation products are almost the primary source of NIAS in plastic FCMs, most from antioxidants as Irganox 1010 and Irgafos 168, following by oligomers and side reaction products. The NIAS assessment in plastics FCMs is usually made by migration tests under worst-case conditions using food simulants. For predicted NIAS, targeted analytical methods are applied using GC-MS based methods for volatile NIAS and GC-MS and LC-MS based methods for semi- and non-volatile NIAS; non-targeted methods to analyze unknown NIAS in plastic FCMs are applied using GC and LC techniques combined with QTOF mass spectrometry (HRMS). In terms of NIAS risk assessment and prioritization, the threshold of toxicological concern (TTC) concept is the most applied tool for risk assessment. Bioassays with sensitive analytical techniques seem to be an efficient method to identify NIAS and their hazard to human exposure; the combination of genotoxicity testing with analytical chemistry could allow the Cramer class III TTC application to prioritize unknown NIAS. The scientific justification for implementing a molecular weight-based cut-off (<1000 Da) in the risk assessment of FCMs should be reevaluated. Although official guides and opinions are being issued on the subject, the whole chain's alignment is needed, and more specific legislation on the steps to follow to get along with NIAS.