Development of a pH-dependent homogeneous liquid-liquid extraction by cold-induced phase separation in acetonitrile/water mixtures for determination of quinolone residues in animal-derived foods

Enhanced selectivity for convenient extraction of acidic mycotoxins using a miniaturized centrifugal integrated cold-induced phase separation: Determination of fumonisins and ochratoxins in cereals as a proof-of-concept study

Starches-rich and protein-rich cereal samples commonly need tedious sample preparation steps before instrumental analysis. This study developed a miniaturized centrifugal integrated cold-induced phase separation (CIPS) method for convenient sample preparation. A small-sized centrifuge tube (2 mL) and a low-temperature centrifuge, both of which are easily accessible, make up the basic components of the system. Unlike conventional sample preparation methods that need a step-by-step extraction, enrichment, purification, and centrifugation, this centrifugal integrated CIPS method can be performed by a one-step combination protocol under a low-temperature centrifuge. As a proof-of-concept study, satisfactory recoveries and enrichment factors were demonstrated for the extraction of fumonisins and ochratoxins from cereals. A sensitive and selective quantification method was yielded by combining LC-HRMS using tSIM acquisition mode, with good linearity (R2 > 0.998), accuracy (82.9-106.5%), and precision (<13.4%). This strategy is convenient, low-cost, repeatable, and easy to semi-automate, further expanding the extraction potential for other acidic mycotoxins.

Current analytical strategies for the determination of quinolone residues in milk

Quinolones are potent antibacterial drugs extensively utilized for treating bacterial infections in poultry. However, the presence of quinolone antibiotic residues in milk is a matter of concern due to potential health risks and adverse effects on milk quality. This review provides an overview of current analytical strategies for the determination of quinolone residues in milk. Various sample preparation techniques, such as liquid-phase extraction, solid-phase extraction and QuEChERS, are discussed, along with detection methods including instrument-based detection, immune-based detection, and microbial detection. The advantages and limitations of each method are highlighted, as well as their applicability in different stages of milk production. Additionally, recent advancements in sample preparation and detection methods are presented. This comprehensive review aims to contribute to the development of accurate and reliable methods for the detection of quinolone residues in milk, ensuring the safety and quality of dairy products.

Fabrication of a magnetic metal-organic framework/covalent organic framework composite for simultaneous magnetic solid-phase extraction of seventeen trace quinolones residues in meats

Effective capture of quinolones (QNs) in animal-derived food is a vital procedure for food safety monitoring. However, the lack of adsorption specificity and difficult to recycle in complex substrate conditions have been major problems for most of the adsorbents. In this work, a magnetic Fe3O4/MOF/COF composite (named Fe3O4@NH2-MIL-125@TpPa-SO3H) was successfully synthesized with good magnetic responsiveness and conspicuous affinity towards QNs. The Fe3O4/MOF/COF composite was used as a magnetic solid-phase extraction (MSPE) adsorbent for pretreatment and determination of QNs in meat samples. Under optimal MSPE conditions in combination with high performance liquid chromatography-quadrupole orbitrap high resolution mass spectrometer (HPLC-Q-Orbitrap HRMS), the proposed method had good linearity (R2 ≥ 0.9978) from 0.01 to 100ng g-1, low limits of detection (0.0016 to 0.0940ng g-1), good precision with relative standard deviations lower than 5.8%. This method was effectively applied to the detection of 17 QNs in the spiked pork, chicken and beef samples with satisfactory recoveries from 83.9 to 106.2%. The separation selectivity mainly due to the π-π interaction, hydrogen bonding, and electrostatic attraction between QNs and the sulfonic acid and amino functional groups of the composite. After verification, the stability and reusability of the composite meet the requirements of complex matrix sample pretreatment. The developed MSPE method based on the magnetic Fe3O4/MOF/COF composite provided an ideal sample pretreatment alternative for determining trace QNs in complex matrixes with selectivity, simplicity, rapidity, and efficiency.

Assessment and validation of the p-QuEChERS sample preparation methodology for the analysis of >200 veterinary drugs in various animal-based food matrices

The need remains for veterinary multi-residue methods that reliably quantify and identify veterinary drugs in the various animal-based food matrices. Such a method should not only show good method performance parameters (e.g. recoveries of analytes) but must also be fast and cheap. The proposed method focused on the following points: acceptable analyte trueness (recovery) and precision for a large number (200) of diverse veterinary drugs in the relevant animal-based food matrices (egg, muscle, fatty fish, liver, kidney, and honey). The sample preparation method termed p-QuEChERS uses a salt mixture consisting of potassium phosphates to induce phase separation. The avoidance of conventional QuEChERS salts (e.g. magnesium sulphate) significantly improves recoveries of several critical analytes. Analyte recoveries were further improved by adding a centrifugation and a defatting step before initiating the salt-induced phase separation. This combined clean-up removes a large fraction of the potentially interfering matrix compounds. As a result, matrix effects in the electrospray interface were minimized. These factors were the basis for the obtained good validation data. Two types of high-resolution mass spectrometers coupled to liquid chromatography were compared for analysis. In comparison with conventional QuEChERS, the proposed p-QuEChERS concept improved the recovery of polar analytes such as penicillins, tetracyclines and quinolones. The simplicity of the procedure and the low consumable expenses make the method ideal for the routine control of veterinary drugs in all evaluated animal-based food matrices.

Synthesis of hierarchical porous zirconium dioxide and its application in the detection of sulfonamides in animal-derived food

In order to effectively remove grease for the detection of sulfonamides, a non-toxic and low-cost hierarchical porous zirconia material was synthesized using the dual template method. The lipid impurities in an animal-derived food matrix can be absorbed by hierarchical zirconia. A ZrO₂ prepolymer was synthesized by mixing amphiphilic triblock copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (P123) with tannin extract as the double template and Zr(SO₄)₂ as the metal source. After aging, drying and calcination at high temperature, the prepolymer transforms into a hierarchical porous structure. The synthesized materials were characterized using SEM, XRD, FT-IR, and BET. The results show that the material has an abundant pore structure and hierarchical pore structure. The adsorption conditions were optimized. The hierarchical porous ZrO₂ synthesized by this method is relatively uniform, and is characterized by large specific surface area as well as high lipid impurity adsorption capacity. Through the optimization experiment of adsorption conditions, we found that hierarchical porous ZrO₂ can reach the maximum adsorption capacity in 60 min under weak acidic conditions. The samples are used for actual sample testing such as HPLC of sulfadiazine (SD), sulfamethazine (SM2), sulfamethoxydiazine (SMD), sulfamethoxazole (SIZ) and sulfadimethoxine (SDM), and the recovery experiment of sulfonamides in chicken was carried out. The recoveries were 80.9-97.6% and the detection limit was 3.8-17.6 μg L^-1. This work provides a new strategy for oil removal using hierarchical porous materials.

Authenticity and traceability of goat milk: Molecular mechanism of β-carotene biotransformation and accessibility

The efficiently extraction and accurately quantify of β-carotene and its metabolites are crucial for authenticity and traceability in goat milk. Nevertheless, its reliability can be largely improved. In this study, meticulously designed native ESI-MS, fluorescence spectroscopy and molecular docking in combination with cold-induced acetonitrile aqueous two-phase separation system weaken the interaction between β-lactoglobulin and β-carotene metabolites and realized the efficiently extraction. Furthermore, established non-targeted quantitative metabolomics with optimal ion source and variable data-independent acquisition minimized the matrix effects and potential ion suppression. Validated atmospheric pressure chemical ionization-ultra high performance liquid chromatography-Orbitrap method showed that β-carotene as distinctive biomarker in cow milk, and retinol, retinaldehyde, retinoic acid and abscisic acid in goat milk. Collectively, the proposed method is a powerful tool to detect cow adulteration risks in goat milk samples and provides valuable information for availability on authenticity of goat milk.

Covalent Organic Framework/Polyacrylonitrile Electrospun Nanofiber for Dispersive Solid-Phase Extraction of Trace Quinolones in Food Samples

The extraction of quinolone antibiotics (QAs) is crucial for the environment and human health. In this work, polyacrylonitrile (PAN)/covalent organic framework TpPa–1 nanofiber was prepared by an electrospinning technique and used as an adsorbent for dispersive solid-phase extraction (dSPE) of five QAs in the honey and pork. The morphology and structure of the adsorbent were characterized, and the extraction and desorption conditions for the targeted analytes were optimized. Under the optimal conditions, a sensitive method was developed by using PAN/TpPa–1 nanofiber as an adsorbent coupled with high-performance liquid chromatography (HPLC) for five QAs detection. It offered good linearity in the ranges of 0.5–200 ng·mL⁻¹ for pefloxacin, enrofloxacin, and orbifloxacin, and of 1–200 ng·mL⁻¹ for norfloxacin and sarafloxacin with correlation coefficients above 0.9946. The limits of detection (S/N = 3) of five QAs ranged from 0.03 to 0.133 ng·mL⁻¹. The intra-day and inter-day relative standard deviations of the five QAs with the spiked concentration of 50 ng·mL⁻¹ were 2.8–4.0 and 3.0–8.8, respectively. The recoveries of five QAs in the honey and pork samples were 81.6–119.7%, which proved that the proposed method has great potential for the efficient extraction and determination of QAs in complex samples.

In-situ induced ethanol-water phase separation extraction of phthalate esters in alcoholic liquid sample using potassium triphosphate and analysis by gas chromatography-mass spectrometry

A novel and efficient analytical method consisting of in-situ potassium triphosphate induced ethanol-water phase separation extraction and followed by gas chromatography-mass spectrometry (GC-MS) detection was developed for determination of eighteen phthalate esters (PAEs) in alcoholic liquid samples. Experimental parameters affecting the extraction efficiency were studied and optimized by univariate analysis. The effects of salt type and concentration, concentration of ethanol, redissolve solvent, vortex and standing time, solution pH on extraction efficiency were investigated. The developed method exhibited good linearity at a concentration range of 5-2500 μg·L^-1 for diisononyl phthalate and 1-500 μg·L^-1 for other PAEs. In addition, the coefficients of determination (R²) for all PAEs ranged from 0.9979 to 0.9999, the detection limits (LODs) and the limits of quantification (LOQs) were in the range of 0.014-0.530 μg·L^-1 and 0.047-1.767 μg·L^-1, respectively, the spiked recoveries were in the range of 92.2%-110.2% with the relative standard deviation (RSD) less than 8.6%. As ethanol within alcoholic liquid samples was used to separate PAEs with none solvent added at extraction processing, the proposed method could be considered simple and environmentally friendly.

Generic Enrichment of Organic Contaminants in Human Biomonitoring: Application in Monitoring Early Life Exposures to Fipronil via Breast Milk

In human biomonitoring, a high-throughput extraction and enrichment method for multiple types of organic contaminants at the part-per-trillion level is critical yet challenging, especially in the limited sample volume. When large-scale sample analysis is involved, low cost is often what we should consider. We describe a generic and straightforward cold-induced liquid-liquid extraction (CI-LLE) strategy to meet this need. Current methods for extracting and enriching organic contaminants from biological samples often require multistep sample processing, including specially tailoring the extraction solvent or adsorbents. This method uses cold-induced phase separation to achieve the extraction and enrichment of studied organic contaminants by adjusting the proportion of acetonitrile/water mixture, so as to integrate the extraction and enrichment in one step without additional reagents and adsorbents. In this study, fipronil insecticide was used as a representative compound to determine the key parameters of CI-LLE. The optimized CI-LLE procedure allowed simultaneous extraction and enrichment of studied organic contaminants, providing excellent enrichment factors (especially for lipophilic organic contaminants). CI-LLE was further applied in monitoring early life exposures of fipronil in 109 breast milk samples. This study provided baseline data on fipronil levels in breast milk samples from China. For infants, exposure to fipronil is of concern. In summary, CI-LLE provides a feasible solution for a generic, efficient, and low-cost preparation of biological samples and promotes high-throughput batch analysis of organic contaminants for large-scale human biomonitoring.