1
|
Zhao YL, You YX, Chen YL, Zhang Y, Du Y, Tang DQ. Fabrication of a surface molecularly imprinted polymer membrane based on a single template and its application in the separation and extraction of phenytoin, phenobarbital and lamotrigine. RSC Adv 2024; 14:8353-8365. [PMID: 38469200 PMCID: PMC10926979 DOI: 10.1039/d4ra00294f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2024] [Accepted: 02/19/2024] [Indexed: 03/13/2024] Open
Abstract
An innovative molecularly imprinted polymer membrane (MIPM) was prepared with polyvinylidene difluoride (PVDF) as the support, phenytoin (PHT) as the single template, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linking reagent, azobisisobutyronitrile as the initiator, and acetonitrile-dimethylformamide (1 : 1.5, v/v) as the porogen. These materials were characterized via scanning electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller measurements and X-ray photoelectron spectroscopy. Their adsorption performances were evaluated through a series of experiments including isothermal adsorption, kinetic adsorption, selective adsorption, adsorption-desorption, reusability, and preparation reproducibility. Additionally, the application was explored by investigating the extraction recovery of MIPMs towards PHT, phenobarbital (PHB) and lamotrigine (LTG) in different matrices including methanol, normal saline (NS), phosphate buffer solution (PBS) and plasma. The results showed that MIPMs with rough and porous surfaces were successfully constructed, which offered good preparation reproducibility, reusability and selectivity. The adsorption capacities of MIPMs towards PHT, PHB and LTG were 2.312, 2.485 and 2.303 mg g-1, respectively, while their corresponding imprinting factors were 8.538, 12.122 and 4.562, respectively. The adsorption equilibrium of MIPMs was achieved within 20 min at room temperature without stirring or ultrasonication. The extraction recoveries of MIPMs for PHT, PHB or LTG in methanol, NS and PBS were more than 80% with an RSD% value of less than 3.64. In the case of plasma, the extraction recovery of MIPMs for PHT and PHB was more than 80% with an RSD% value of less than 2.41, while that of MIPMs for LTG was more than 65% with an RSD% value of less than 0.99. All the results indicated that the preparation method for MIPMs was simple, stable, and reliable, and the prepared MIPMs possessed excellent properties to meet the extraction application of PHT, PHB and LTG in different matrices.
Collapse
Affiliation(s)
- Yan-Lin Zhao
- Department of Pharmacy, Suining People's Hospital Affiliated to Xuzhou Medical University Suining 221202 China
| | - Yu-Xin You
- Jiangsu Key Laboratory of New Drug Research and Clinical Pharmacy, Xuzhou Medical University 209 Tongshan Road Xuzhou 221004 Jiangsu Province China +86 516 83263313 +86 516 83263313
| | - Yu-Lang Chen
- Department of Pharmacy, Suining People's Hospital Affiliated to Xuzhou Medical University Suining 221202 China
| | - Ying Zhang
- Department of Pharmacy, Suining People's Hospital Affiliated to Xuzhou Medical University Suining 221202 China
| | - Yan Du
- Jiangsu Key Laboratory of New Drug Research and Clinical Pharmacy, Xuzhou Medical University 209 Tongshan Road Xuzhou 221004 Jiangsu Province China +86 516 83263313 +86 516 83263313
- State Key Laboratory of Pharmaceutical Biotechnology, Chemistry and Biomedicine Innovation Center (ChemBIC), Jiangsu Key Laboratory of Molecular Medicine, Medical School, Nanjing University Nanjing 210093 China
| | - Dao-Quan Tang
- Department of Pharmacy, Suining People's Hospital Affiliated to Xuzhou Medical University Suining 221202 China
- Jiangsu Key Laboratory of New Drug Research and Clinical Pharmacy, Xuzhou Medical University 209 Tongshan Road Xuzhou 221004 Jiangsu Province China +86 516 83263313 +86 516 83263313
| |
Collapse
|
2
|
Magnetic molecularly imprinted polymers based on eco-friendly deep eutectic solvent for recognition and extraction of three glucocorticoids in lotion. Microchem J 2022. [DOI: 10.1016/j.microc.2022.107975] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
3
|
Ratnaningsih E, Kadja GTM, Putri RM, Alni A, Khoiruddin K, Djunaidi MC, Ismadji S, Wenten IG. Molecularly Imprinted Affinity Membrane: A Review. ACS OMEGA 2022; 7:23009-23026. [PMID: 35847319 PMCID: PMC9280773 DOI: 10.1021/acsomega.2c02158] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
A molecularly imprinted affinity membrane (MIAM) can perform separation with high selectivity due to its unique molecular recognition introduced from the molecular-printing technique. In this way, a MIAM is able to separate a specific or targeted molecule from a mixture. In addition, it is possible to achieve high selectivity while maintaining membrane permeability. Various methods have been developed to produce a MIAM with high selectivity and productivity, with their respective advantages and disadvantages. In this paper, the MIAM is reviewed comprehensively, from the fundamentals of the affinity membrane to its applications. First, the development of a MIAM and various preparation methods are presented. Then, applications of MIAMs in sensor, metal ion separation, and organic compound separation are discussed. The last part of the review discusses the outlook of MIAMs for future development.
Collapse
Affiliation(s)
- Enny Ratnaningsih
- Biochemistry
Research Division, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jl. Ganesha No. 10, Bandung 40132, Indonesia
| | - Grandprix T. M. Kadja
- Division
of Inorganic and Physical Chemistry, Institut
Teknologi Bandung, Jalan
Ganesha No. 10, Bandung 40132, Indonesia
- Research
Center for Nanosciences and Nanotechnology, Institut Teknologi Bandung, Jalan Ganesha No. 10, Bandung 40132, Indonesia
- Center
for Catalysis and Reaction Engineering, Institut Teknologi Bandung, Jalan Ganesha No. 10, Bandung 40132, Indonesia
| | - Rindia M. Putri
- Biochemistry
Research Division, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jl. Ganesha No. 10, Bandung 40132, Indonesia
| | - Anita Alni
- Organic
Chemistry Research Division, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Jalan Ganesha No. 10, Bandung 40132, Indonesia
| | - Khoiruddin Khoiruddin
- Research
Center for Nanosciences and Nanotechnology, Institut Teknologi Bandung, Jalan Ganesha No. 10, Bandung 40132, Indonesia
- Department
of Chemical Engineering, Institut Teknologi
Bandung, Jalan Ganesha
No. 10, Bandung 40132, Indonesia
| | - Muhammad C. Djunaidi
- Department
of Chemistry, Faculty of Science and Mathematics, Diponegoro University, Jl. Prof. H Soedarto SH, Semarang 50275, Indonesia
| | - Suryadi Ismadji
- Department
of Chemical Engineering, Widya Mandala Surabaya
Catholic University, Kalijudan 37, Surabaya 60114, Indonesia
| | - I. Gede Wenten
- Research
Center for Nanosciences and Nanotechnology, Institut Teknologi Bandung, Jalan Ganesha No. 10, Bandung 40132, Indonesia
- Department
of Chemical Engineering, Institut Teknologi
Bandung, Jalan Ganesha
No. 10, Bandung 40132, Indonesia
| |
Collapse
|
4
|
Shahhoseini F, Azizi A, S.Bottaro C. A critical evaluation of molecularly imprinted polymer (MIP) coatings in solid phase microextraction devices. Trends Analyt Chem 2022. [DOI: 10.1016/j.trac.2022.116695] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
5
|
Pan Z, Zhu Y, Rong J, Mao K, Yang D, Zhang T, Pan J, Qiu F. A recognition strategy combining effective boron affinity technology and surface imprinting to prepare highly selective and easily recyclable polymer membrane for separation of drug molecule. J Colloid Interface Sci 2022; 624:1-13. [PMID: 35660878 DOI: 10.1016/j.jcis.2022.05.138] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2022] [Revised: 05/12/2022] [Accepted: 05/22/2022] [Indexed: 10/18/2022]
Abstract
Cellulose acetate membrane (CAM) has become one of the most widely used membrane materials by virtue of stability and hydrophilicity. In this work, to achieve the aim of selective recognition and separation of drug molecule shikimic acid (SA), an effective recognition tactics was proposed by combining boron affinity technology with surface imprinting strategy based on cellulose acetate membrane with low price and biocompatibility. The supporting CAM material was prepared through the phase inversion technique by continuous adjustment of different factors including solvent type and kinds of pore-forming agents, and the optimal CAM with multistage structure and highly porosity was applied for the imprinting of SA. Then the imprinted polymer membrane (MIPs-CAM) was developed via boron affinity surface imprinting polymerization. Various methods (FT-IR, UV-vis, SEM, XPS, AFM and TGA) were used to characterize the structure, morphology, elemental composition, surface roughness and thermal property of the obtained membrane. The as-prepared MIPs-CAM showed homogeneous and abundant imprinted layer, good thermal stability. The batch adsorption results showed that the MIPs-CAM had fast adsorption kinetics, specific recognition ability, and the adsorption capacity could obtain 63.598 mg g-1, which was two times higher than that of non-imprinted membrane (NIPs-CAM). The adsorption isotherms conformed to the Langmuir isotherm and the adsorption processes were spontaneous and endothermic. Additionally, the adsorption capacity of MIPs-CAM still reached 85% of the initial result after five cycles. The experimental results revealed that the molecularly imprinted membrane possessed the advantages of high selectivity and easy recovery compared with the traditional molecular imprinted polymers for SA separation. These results indicate that boron affinity MIPs-CAM with high performance will provide a promising platform for the separation and purification of other cis-diol drug molecules from environmental resources.
Collapse
Affiliation(s)
- Zhiyuan Pan
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, PR China
| | - Yao Zhu
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, PR China
| | - Jian Rong
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, PR China
| | - Kaili Mao
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, PR China
| | - Dongya Yang
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, PR China
| | - Tao Zhang
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, PR China
| | - Jianming Pan
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, PR China.
| | - Fengxian Qiu
- School of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, PR China.
| |
Collapse
|
6
|
Wan S, Xu O, Song H, Yang J, Zhu X. Imidazole ionic liquid functionalized ZIF-67 molecularly imprinted solid-phase extraction coupled with high performance liquid chromatography for analysis of bisphenol A. ANALYTICAL METHODS : ADVANCING METHODS AND APPLICATIONS 2022; 14:1904-1912. [PMID: 35521687 DOI: 10.1039/d2ay00359g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
An effective method based on an imidazole ionic liquid functionalized ZIF-67 molecularly imprinted solid-phase extractant (ZIF-67@[Bmim][Br]@MIP) coupled with high performance liquid chromatography (HPLC) for the separation/analysis of bisphenol A (BPA) was established. ZIF-67@[Bmim][Br]@MIP was characterized by FTIR, XRD, SEM, TEM and BET. Several important factors, such as pH, amount of extractant, extraction time, and types of eluents were investigated in detail. Under the optimal conditions, the linear range of the method was 0.01-20.00 μg mL-1, the detection limit was 5.0 ng mL-1, and the linear correlation was good (R2 = 0.9994). The detection of BPA in mineral water bottles, milk cartons and milk tea cups proved that the method was simple and effective, and could be used to separate and analyze BPA in real samples.
Collapse
Affiliation(s)
- Shuyu Wan
- College of Chemistry and Chemical Engineering, College of Guangling, Yangzhou University, Yangzhou, 225002, China.
| | - Ouwen Xu
- College of Chemistry and Chemical Engineering, College of Guangling, Yangzhou University, Yangzhou, 225002, China.
| | - Hanyang Song
- College of Chemistry and Chemical Engineering, College of Guangling, Yangzhou University, Yangzhou, 225002, China.
| | - Jing Yang
- College of Chemistry and Chemical Engineering, College of Guangling, Yangzhou University, Yangzhou, 225002, China.
| | - Xiashi Zhu
- College of Chemistry and Chemical Engineering, College of Guangling, Yangzhou University, Yangzhou, 225002, China.
| |
Collapse
|
7
|
Donato L, Nasser II, Majdoub M, Drioli E. Green Chemistry and Molecularly Imprinted Membranes. MEMBRANES 2022; 12:472. [PMID: 35629798 PMCID: PMC9144692 DOI: 10.3390/membranes12050472] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/06/2022] [Revised: 04/22/2022] [Accepted: 04/24/2022] [Indexed: 11/16/2022]
Abstract
Technological progress has made chemistry assume a role of primary importance in our daily life. However, the worsening of the level of environmental pollution is increasingly leading to the realization of more eco-friendly chemical processes due to the advent of green chemistry. The challenge of green chemistry is to produce more and better while consuming and rejecting less. It represents a profitable approach to address environmental problems and the new demands of industrial competitiveness. The concept of green chemistry finds application in several material syntheses such as organic, inorganic, and coordination materials and nanomaterials. One of the different goals pursued in the field of materials science is the application of GC for producing sustainable green polymers and membranes. In this context, extremely relevant is the application of green chemistry in the production of imprinted materials by means of its combination with molecular imprinting technology. Referring to this issue, in the present review, the application of the concept of green chemistry in the production of polymeric materials is discussed. In addition, the principles of green molecular imprinting as well as their application in developing greenificated, imprinted polymers and membranes are presented. In particular, green actions (e.g., the use of harmless chemicals, natural polymers, ultrasound-assisted synthesis and extraction, supercritical CO2, etc.) characterizing the imprinting and the post-imprinting process for producing green molecularly imprinted membranes are highlighted.
Collapse
Affiliation(s)
- Laura Donato
- Institute on Membrane Technology, CNR-ITM, University of Calabria, Via P. Bucci, 17/C, 87030 Rende, CS, Italy;
| | - Imen Iben Nasser
- Faculté des Sciences de Monastir, Université de Monastir, Bd. de l’Environnement, Monastir 5019, Tunisia; (I.I.N.); (M.M.)
| | - Mustapha Majdoub
- Faculté des Sciences de Monastir, Université de Monastir, Bd. de l’Environnement, Monastir 5019, Tunisia; (I.I.N.); (M.M.)
| | - Enrico Drioli
- Institute on Membrane Technology, CNR-ITM, University of Calabria, Via P. Bucci, 17/C, 87030 Rende, CS, Italy;
- Department of Engineering and of the Environment, University of Calabria, 87030 Rende, CS, Italy
- College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China
- Centre of Excellence in Desalination Technology, King Abdulaziz University, Jeddah 21589, Saudi Arabia
| |
Collapse
|
8
|
Dummy molecularly imprinted polymers for class-selective extraction of amphetamine-type stimulants from alcoholic and nonalcoholic beverages. J Chromatogr A 2022; 1663:462759. [PMID: 34986443 DOI: 10.1016/j.chroma.2021.462759] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2021] [Revised: 12/14/2021] [Accepted: 12/16/2021] [Indexed: 01/20/2023]
Abstract
Molecularly imprinted polymer was constructed for the first time through dummy imprinting strategy with homopiperonylamine as dummy template. The prepared dummy molecularly imprinted polymer (DMIP) showed high class selectivity towards the most popular amphetamine-type stimulants (ATSs) such as methamphetamine, amphetamine, 3,4-methylenedioxymethamphetamine, 3,4-methylenedioxy-amphetamine, and 3,4-methylenedioxy-N-ethylamphetamine with the imprinting factors of 2.280∼3.698 and selectivity factors of 1.654∼3.698. Moreover, ATSs could be rapidly adsorbed from water with the equilibrium time within 5 min. Hydrogen-bonding interaction between the amino groups of ATSs and carboxy on DMIP could be dominated adsorption mechanism. DMIP was employed as solid phase extraction (SPE) sorbents. Under the optimum extraction conditions, the method using DMIP-based SPE and high performance liquid chromatography-tandem mass spectrometry showed good linearity in the range of 0.025∼1.00 μmol L-1, good repeatability (RSD 4.8∼8.6%, n = 5) and low limits of quantification (0.007∼0.200 ng mL-1, S/N = 10). Satisfactory recoveries (72.5∼120%) with low RSD values (<10%) were obtained for all targets viz. spiked coke carbonated drinks, beer and cocktail. Compared with other commercial SPE sorbents, DMIP exhibited lower matrix effect (ME) for coke, beer and cocktail with ME values of 101∼124%, 75.8∼80.2% and 103∼128%, respectively. The obtained results suggested that the developed DMIP materials could be a potential candidate for pretreatment of ATSs in alcoholic and nonalcoholic beverages.
Collapse
|