Effect of ethoxylated sorbitan ester surfactants on the chromatographic efficiency of poly(ethylene glycol)-based monoliths

Effect of hydrophilic/lipophilic balance on the porogenic properties of non-ionic surfactants for monolith preparation and chromatographic separation

The effect of hydrophilic/lipophilic balance (HLB) of polyoxyethylene ethers of different chain lengths on the microporogenic properties of the Brij surfactants has been studied. The objective of this work is to help better understand the role of each porogen and to set criteria for selecting the proper non-ionic surfactant, based on the HLB value. Seven recipes of different porogen compositions were first prepared and the highest efficiency was achieved using decane/decanol/dodecanol mixture with Brij® 30. Then, four other Brij surfactants covering the entire HLB scale were tested, and the prepared monoliths were characterized by SEM, BET, FT-IR and chromatography. The results showed that increasing the HLB from 9.72 to 18.84 was accompanied by an increase in monolith density and surface areas. The optimum HLB range was found to be 10 to 15. Surfactants of lower HLB formed either nonporous or less efficient columns, while those of higher HLB formed non-permeable columns. Adjusting the HLB was possible by mixing surfactants of different HLB. The prepared monoliths could be used in the isocratic mode with a mobile phase consisting of a mixture of ACN and water (20:80, v/v) at a flow rate of 1.5 μL min^-1 to separate five sulfa drugs. The separation results showed that the elution order of the compounds correlated with their lipophilicity, with sulfamerazine (logp = 0.52) being the first to elute, and sulfaquinoxoline (logp=1.70) being the most retained. The asymmetry factors of the separated compounds ranged between 1.18 and 1.25, and the resolution was found to be in the range 2.92-7.80. The prepared monoliths could be also successfully separate a mixture of four different nonsteroidal anti-inflammatory drugs and a mixture of four benzoic acid derivatives. This work assists in optimizing the surfactant-based porogenic mixture to meet the desired porosity, surface area, morphology and chromatographic separation requirements.

Removal of Toxic Metal Ions Using Poly(BuMA–co–EDMA) Modified with C-Tetra(nonyl)calix[4]resorcinarene

A copolymer of poly(BuMA–co–EDMA) modified with C-tetra(nonyl)calix[4]resorcinarene was obtained via the impregnation method. The formation of the modified copolymer was confirmed and investigated using various techniques; in this way, the presence of calix[4]resorcinarene was confirmed by FT-IR spectroscopy and by high resolution transmission electron microscopy. The modified copolymer was used for the removal of highly toxic cations (Pb²⁺, Hg²⁺, and Cd²⁺) from aqueous solutions. To perform the removal, we used the batch sorption technique and the effects of time of contact, pH, and volume of sample on the effective sorption were determined. The best results were observed for Pb²⁺ extraction, which was comparatively more efficient. Adsorption–desorption experiments revealed that the modified copolymer could be used for several cycles without significant loss of adsorption capacity. Finally, the results showed that the modified copolymer application is highly efficient for the removal of lead ions from aqueous solutions.