Capillary coated with three-dimensional covalent organic frameworks for separation of fluoroquinolones by open-tubular capillary electrochromatography

Rapid and in-situ preparation COFs coated capillary by adsorption method for the separation and determination of phthalate ester using CEC

As a novel class of stationary phase materials, covalent organic frameworks (COFs) have shown great promise in open-tubular capillary electrochromatography. However, the current preparation of COFs coating capillaries heavily relies on tedious and time-consuming covalent bond methods. In this work, a novel, simple and rapid adsorption method was developed for fabrication of TPB-DMTP COF (fabricated from 1,3,5-tris(4-aminophenyl)benzene (TPB) and 2,5-dimethoxyterephthalaldehyde (DMTP)) coated capillary. Due to the crystallization process of the COF is greatly shortened because pre-modification capillary does not require silane coupling agent, this method enables the rapid preparation of COFs-coated capillaries. The organic molecular building units only need 25 min to form a stable COFs coating on the inner wall of a capillary by this method. To our knowledge, this is the shortest method for preparing COFs coated capillary up to now. The performance of the TPB-DMTP COF coated capillary was evaluated by using phthalate esters as model analytes. The results demonstrated that the TPB-DMTP COF coated capillary has excellent repeatability and stability. The relative standard deviations (RSDs) of the analyte's retention time of intra-day, inter-day and column-to-column were in the range of 0.05 %-0.27 %, 0.31 %-0.63 % and 0.31 %-0.88 %, respectively. And, no significant changes were observed in separation efficiency and retention time after over 200 runs. Finally, the TPB-DMTP COF coated capillary was applied for the determination of phthalates in marketed plastic bag and the recovery ranged from 88.0 % to 114.0 %.

In situ growth of imine-based covalent organic framework as stationary phase for open-tubular capillary electrochromatographic separation

Designing advanced stationary phases to improve separation efficiency is essential in capillary electrochromatography. Due to their outstanding performance, covalent organic frameworks have recently demonstrated considerable promise in the field of separation science. Herein, an open-tubular capillary electrochromatography method was reported using porous imine-based covalent organic framework with sufficiently available interaction sites as stationary phase. The imine-based covalent organic framework coated capillary was easily prepared via an in situ growth method at room temperature, and its separation performance was evaluated, indicating the high separation efficiency for three types of analytes, including herbicides, polybrominated dibenzofurans, and bisphenols. Moreover, the imine-based covalent organic framework coated capillary showed good reproducibility and stability, with intraday (n = 3), interday (n = 3), and column-to-column (n = 3) relative standard deviations of retention time and peak areas of less than 5%. The separation efficiency of the coated capillary remained unchanged even after 200 runs and the maximum theoretical plates reached up to 85 595 N/m for 4,4'-ethylidenebisphenol. It was predicted that the imine-based covalent organic framework stationary phase would be a strong contender for chromatographic separation with high efficiency.

Three-dimensional fluorinated covalent organic frameworks coated capillary for the separation of fluoroquinolones by capillary electrochromatography

In this work, a three-dimensional fluorinated covalent organic frameworks (3D FCOFs) JUC-515 was synthesized from tetra(4-aminophenyl)methane (TAM) and 2,3,5,6-tetrafluoroterephthalol (TFA) by an ionic liquid method. JUC-515 was introduced into the capillary column and bonded to the inner wall of the capillary column by chemical bonding. Through a variety of characterization results, JUC-515 was successfully synthesized and introduced into the capillary column. The effects of buffer solution concentration, organic additive content and pH of the buffer solution on the separation of fluoroquinolones (FQs) were investigated in detail. The JUC-515-coated capillary column showed good resolution (>1.5) and reproducibility. The relative standard deviations (RSDs) of the retention time for intraday, interday, column-to-column and interbatch precision were less than 0.88%, 2.45%, 2.74% and 3.32%, respectively. The RSDs of the peak area for intraday, interday, column-to-column and interbatch precision were less than 3.79%, 4.31%, 3.33% and 5.62%, respectively. The JUC-515-coated capillary column could be used no less than 150 times. The results showed that the JUC-515-coated capillary column had good separation performance. In addition, by separating fluorinated β-phenylalanine analogs, β-phenylalanine and trifluoromethyl β-phenylalanine analogs, the separation mechanism based on fluorine interactions was discussed. In conclusion, JUC-515 had good potential as a stationary phase for capillary electrochromatography.

In-situ immobilization of covalent organic frameworks as stationary phase for capillary electrochromatography

A new kind of covalent organic framework (COF) was first utilized as an stationary phase for open-tubular electrochromatography (OT-CEC) by in situ synthesis immobilized method at room temperature. On the basis of our previous work, 4,4',4″-(1,3,5-Triazine-2,4,6-triyl)trianiline (TZ) and 2,5-bis(2-propyn-1-yloxy)-1,4-benzenedicarboxaldehyde (BPTA) were employed as building blocks for the synthesis of COF TZ-BPTA. The coated capillary and COF TZ-BPTA were characterized by scanning electron microscopy (SEM). Then, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) were also applied to characterize COF TZ-BPTA and the modified column. In SEM, it can be seen that COF TZ-BPTA was the spherical shape and the modified capillary was covered with globular particles equably. The COF TZ-BPTA coated column exhibited good separation resolution and efficiency towards two antiepileptic drugs and other kinds of small organic molecules involving alkylbenzene, sulfonamides, polycyclic aromatic hydrocarbon (PAH), parabens, amino acids and herbicides. The maximum column efficiency was over 2.8 × 105 plates·m-1. In addition, the precisions (RSDs) of the retention times for the alkylbenzenes of intra-day runs (n = 3), inter-day runs (n = 3) and column-to-column runs (n = 3) were all less than 1.70% and separation performance was without obvious change within 100 times run. In addition, the real sample was tested on COF TZ-BPTA coated column. Hence, COF TZ-BPTA showed great potential in the separation domain.

Recent applications and chiral separation developments based on stationary phases in open tubular capillary electrochromatography (2019–2022)

Capillary electrochromatography (CEC) plays a significant role in chiral separation via the double separation principle, partition coefficient difference between the two phases, and electroosmotic flow-driven separation. Given the distinct properties of the inner wall stationary phase (SP), the separation ability of each SP differs from one another. Particularly, it provides large room for promising applications of open tubular capillary electrochromatography (OT-CEC). We divided the OT-CEC SPs developed over the past four years into six types: ionic liquids, nanoparticle materials, microporous materials, biomaterials, non-nanopolymers, and others, to mainly introduce their characteristics in chiral drug separation. There also added a few classic SPs that occurred within ten years as supplements to enrich the features of each SP. Additionally, we discuss their applications in metabolomics, food, cosmetics, environment, and biology as analytes in addition to chiral drugs. OT-CEC plays an increasingly significant role in chiral separation and may promote the development of capillary electrophoresis (CE) combined with other instruments in recent years, such as CE with mass spectrometry (CE/MS) and CE with ultraviolet light detector (CE/UV).

In situ synthesis of a spherical covalent organic framework as a stationary phase for capillary electrochromatography

Covalent organic frameworks (COFs) are a novel type of crystalline porous organic polymer materials recently developed. It has several advantages in chromatographic separation field, such as high thermal stability, porosity, structural regularity, and large specific surface area. Here, a novel spherical COF 1,3,5-tris(4-aminophenyl)benzene (TAPB) and 2,5-bis(2-propyn-1-yloxy)-1,4-benzenedicarboxaldehyde (BPTA) was developed as an electrochromatographic stationary phase for capillary electrochromatography separation. The COF TAPB-BPTA modified capillary column was fabricated via a facile in situ growth method at room temperature. The characterization results of scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, and X-ray diffraction (XRD) confirmed that COF TAPB-BPTA were successfully modified onto the capillary inner surface. The electrochromatography separation performance of the COF TAPB-BPTA modified capillary was investigated. The prepared column demonstrated outstanding separation performance toward alkylbenzenes, phenols, and chlorobenzenes compounds. Furthermore, the baseline separations of non-steroidal anti-inflammatory drugs (NSAIDs) and parabens with good efficiency and high resolution were achieved. Also, the prepared column possessed satisfactory precision of the intra-day runs (n = 5), inter-day runs (n = 3), and parallel columns (n = 3), and the relative standard deviations (RSDs) of the retention times of tested alkylbenzenes were all less than 2.58%. Thus, this new COF-based stationary phase shows tremendous application potential in chromatographic separation field.

•

COF TAPB–BPTA was studied as OT-CEC stationary phase.

•

In situ, room-temperature growth method was quite facile and efficient.

•

Excellent separation performances toward various hydrophobic compounds.

•

The maximum column efficiency was 1.78 × 10⁵ plates/m.

•

Reproducibility and stability were found to be satisfactory.

Recent Developments of Liquid Chromatography Stationary Phases for Compound Separation: From Proteins to Small Organic Compounds

Compound separation plays a key role in producing and analyzing chemical compounds. Various methods are offered to obtain high-quality separation results. Liquid chromatography is one of the most common tools used in compound separation across length scales, from larger biomacromolecules to smaller organic compounds. Liquid chromatography also allows ease of modification, the ability to combine compatible mobile and stationary phases, the ability to conduct qualitative and quantitative analyses, and the ability to concentrate samples. Notably, the main feature of a liquid chromatography setup is the stationary phase. The stationary phase directly interacts with the samples via various basic mode of interactions based on affinity, size, and electrostatic interactions. Different interactions between compounds and the stationary phase will eventually result in compound separation. Recent years have witnessed the development of stationary phases to increase binding selectivity, tunability, and reusability. To demonstrate the use of liquid chromatography across length scales of target molecules, this review discusses the recent development of stationary phases for separating macromolecule proteins and small organic compounds, such as small chiral molecules and polycyclic aromatic hydrocarbons (PAHs).