Rare earth element separations by high-speed counter-current chromatography

Scaling high-speed counter-current chromatography for preparative neodymium purification: Insights and challenges

Efficient rare earth element (REE) separations are becoming increasingly important to technologies ranging from renewable energy and high-performance magnets to applied radioisotope separations. These separations are made challenging by the extremely similar chemical and physical characteristics of the individual elements, which almost always occupy the 3+ oxidation state under ambient conditions. Herein, we discuss the development of a novel REE separation aimed at obtaining purified samples of neodymium (Nd) on a multi-milligram scale using high-speed counter-current chromatography (HSCCC). The method takes advantage of the subtle differences in ionic radii between neighboring REEs to tune elution rates in dilute acid through implementation of the di-(2-ethylhexyl)phosphoric acid (HDEHP)-infused stationary phase (SP) of the column. A La/Ce/Nd/Sm separation was demonstrated at a significantly higher metal loading than previously accomplished by HSCCC (15 mg, RNd/REE > 0.85), while the Pr/Nd separation was achieved at lower metal loadings (0.3 mg, RNd/Pr = 0.75 - 0.83). The challenges associated with scaling REE separations via HSCCC are presented and discussed within.

Elution behavior of drugs in high-speed counter-current chromatography using on-column complexation with metal ions

In this study, determination of (nitrogen containing) drugs by on-column complexation with metal ions in high-speed counter-current chromatography (HSCCC) was investigated. Bromazepam (BMP) was strongly retained in the organic upper stationary phase (UP) of the two-phase solvent system composed of tert-butyl methyl ether-acetonitrile-water (2:2:3, v/v/v) by eluting the aqueous lower mobile phase (LP) at a flow rate of 2 mL min-1. On the other hand, BMP (200 µg mL-1) was eluted faster without retention to the organic UP with the two-phase system containing 100 μg mL-1 of copper ions (CuCl2) because a very polar BMP-Cu2+ complex was immediately formed in the aqueous LP. The dramatic change in the retention behavior of BMP resulted from on-column complexation. The on-column complexation in HSCCC was further investigated for five (nitrogen containing) drugs and seven metal ions. In the result, tizanidine and phentolamine formed complexes with Al3+, Fe2+, Co2+, Ni2+, Cu2+, and Zn2+, ambroxol formed complexes with Al3+, Fe2+, and Cu2+, but voriconazole formed no complexes with all metal ions tested.

Comparison of two different multiple dual-mode counter-current chromatograph for separation of ketoconazole enantiomers

In this work, two different multiple dual-mode (MDM) counter-current chromatography methods, conventional MDM and modified MDM elution modes, were compared for the chiral separation of the ketoconazole enantiomers. The biphasic solvent system which consisted of n-hexane: isobutyl acetate: 0.1 mol/L phosphate buffer (2:4:6, v/v) (pH = 8.5) was employed as stationary phase and mobile phase. And the hydroxypropyl-β-cyclodextrin (HP-β-CD) with a concentration of 100 mmol/L was dissolved in the phosphate buffer, as the chiral selector. Under two different methods, dual-mode (DM) elution was performed to determine the time of the transformed phase roles and multiple cycles were performed to isolate ketoconazole, respectively. The result indicated that the modified MDM elution had a significant improvement on the separation, increasing the resolution from 0.51 to 1.19, while the resolution was increased from 0.40 to 0.79 by the conventional MDM elution. Ultimately, baseline separation of ketoconazole enantiomers was essentially achieved by high-speed counter-current chromatography under optimized modified MDM separation conditions. The final recoveries of the two enantiomers, R-(K) and S-(K), were 92.5 % and 83.3 %, respectively, corresponding to enantiomeric excess values of 99.0 % and 97.0 %, as determined by HPLC.

Separation of rare earth element radioisotopes by reverse-phase high-speed counter-current chromatography

Analytical scale purification of rare earth element (REE) radioisotopes is typically accomplished using cation-exchange resins (e.g. AG 50W-X8) and high-performance liquid chromatography (HPLC). Despite the variety of improvements made since the development of this separation process in the 1950s, nearest neighbor separations remain a challenge, as does the issue of irreversible sample adsorption. Herein, we report a study that evaluates the potential of high-speed counter-current chromatography (HSCCC) as an alternative method for purifying REE elements, with specific reference to separations of fission product REE of interest to nuclear forensics. Complementary HSCCC REE separation experiments, one spiked with radiotracer and REE fission product activity, allowed for in depth analysis of resulting fractions from both an elemental (inductively coupled plasma atomic emission spectroscopy, ICP-AES) and radiological (gamma-ray spectrometry, beta counting) purity perspective. The highly reproducible nature of separation profiles generated from HSCCC instruments was leveraged to simplify work-up of samples containing radioisotopes. Subsequent radioanalytical evaluation revealed minimal carryover of Eu into neighboring Sm and Tb fractions (as indicated by presence of 150Eu), and trace contamination of the Tb fraction with Y (as indicated by presence of 91Y). Subtle differences in stationary phase retention across the two columns were reflected in significant variations in decontamination factors of duplicate parallel separations. These differences paired with obtained distribution of radioisotopes provided valuable insights into future improvements. Collectively, this study represents a significant step forward in development of HSCCC technology for task specific REE radioisotope purification.

An overview of recent progress in multiple dual-mode counter-current chromatography

Counter-current chromatography is a chromatographic separation and purification technique being developed. The development of different elution modes has significantly contributed to this field. Multiple dual-mode elution is a method developed based on dual-mode elution, which consists of a series of changing cycles of the phase role and the direction by switching between normal and reverse elution modes of counter-current chromatography. This dual-mode elution method takes full advantage of the liquid nature of stationary and mobile phases of counter-current chromatography and effectively improves the separation efficiency. So, this unique elution mode has gained extensive attention for separating complex samples. This review mainly describes and summarizes in detail its development, applications, and characteristics in recent years. Meanwhile, its advantages, limitations, and future outlook also have been discussed in this paper.