Cerium oxide nanoparticles prepared in self-assembled systems

Cerium oxide nanoparticles: Synthesis methods and applications in wound healing

Wound care and treatment can be critical from a clinical standpoint. While different strategies for the management and treatment of skin wounds have been developed, the limitations inherent in the current approaches necessitate the development of more effective alternative strategies. Advances in tissue engineering have resulted in the development of novel promising approaches for accelerating wound healing. The use of various biomaterials capable of accelerating the regeneration of damaged tissue is critical in tissue engineering. In this regard, cerium oxide nanoparticles (CeO2 NPs) have recently received much attention because of their excellent biological properties, such as antibacterial, anti-inflammatory, antioxidant, and angiogenic features. The incorporation of CeO2 NPs into various polymer-based scaffolds developed for wound healing applications has led to accelerated wound healing due to the presence of CeO2 NPs. This paper discusses the structure and functions of the skin, the wound healing process, different methods for the synthesis of CeO2 NPs, the biological properties of CeO2 NPs, the role of CeO2 NPs in wound healing, the use of scaffolds containing CeO2 NPs for wound healing applications, and the potential toxicity of CeO2 NPs.

One-Step Low Temperature Synthesis of CeO2 Nanoparticles Stabilized by Carboxymethylcellulose

An elegant method of one-pot reaction at room temperature for the synthesis of nanocomposites consisting of cerium containing nanoparticles stabilized by carboxymethyl cellulose (CMC) macromolecules was introduced. The characterization of the nanocomposites was carried out with a combination of microscopy, XRD, and IR spectroscopy analysis. The type of crystal structure of inorganic nanoparticles corresponding to CeO2 was determined and the mechanism of nanoparticle formation was suggested. It was demonstrated that the size and shape of the nanoparticles in the resulting nanocomposites does not depend on the ratio of the initial reagents. Spherical particles with a mean diameter 2–3 nm of were obtained in different reaction mixtures with a mass fraction of cerium from 6.4 to 14.1%. The scheme of the dual stabilization of CeO2 nanoparticles with carboxylate and hydroxyl groups of CMC was proposed. These findings demonstrate that the suggested easily reproducible technique is promising for the large-scale development of nanoceria-containing materials.

Redox Homeostasis Strategy for Inflammatory Macrophage Reprogramming in Rheumatoid Arthritis Based on Ceria Oxide Nanozyme-Complexed Biopolymeric Micelles

The synovial tissues under rheumatoid arthritis conditions are usually infiltrated by inflammatory cells, particularly M1 macrophages with aberrant redox homeostasis, which causes rapid deterioration of articular structure and function. Herein, we created an ROS-responsive micelle (HA@RH-CeO_X) through the in situ host-guest complexation between ceria oxide nanozymes and hyaluronic acid biopolymers, which precisely delivered nanozyme and clinically approved rheumatoid arthritis drug Rhein (RH) to proinflammatory M1 macrophage populations in inflamed synovial tissues. The abundant cellular ROS could cleave the thioketal linker to trigger the release of RH and Ce. Specifically, the Ce³⁺/Ce⁴⁺ redox pair could present SOD-like enzymatic activity to rapidly decompose ROS and alleviate the oxidative stress in M1 macrophages, while RH could inhibit the TLR4 signaling in M1 macrophages, both of which could act in a concerted manner to induce their repolarization into anti-inflammatory M2 phenotype to ameliorate local inflammation and promote cartilage repair. Notably, rats bearing rheumatoid arthritis showed a drastic increase in the M1-to-M2 macrophage ratio from 1:0.48 to 1:1.91 in the inflamed tissue and significantly reduced inflammatory cytokine levels including TNF-α and IL-6 following the intra-articular injection of HA@RH-CeO_X, accompanied by efficient cartilage regeneration and restored articular function. Overall, this study revealed an approach to in situ modulate the redox homeostasis in inflammatory macrophages and reprogram their polarization states through micelle-complexed biomimetic enzymes, which offers alternative opportunities for the treatment of rheumatoid arthritis.

The Antioxidant Effect of the Metal and Metal-Oxide Nanoparticles

Inorganic nanoparticles, such as CeO₃, TiO₂ and Fe₃O₄ could be served as a platform for their excellent performance in antioxidant effect. They may offer the feasibility to be further developed for their smaller and controllable sizes, flexibility to be modified, relative low toxicity as well as ease of preparation. In this work, the recent progress of these nanoparticles were illustrated, and the antioxidant mechanism of the inorganic nanoparticles were introduced, which mainly included antioxidant enzyme-mimetic activity and antioxidant ROS/RNS scavenging activity. The antioxidant effects and the applications of several nanoparticles, such as CeO₃, Fe₃O₄, TiO₂ and Se, are summarized in this paper. The potential toxicity of these nanoparticles both in vitro and in vivo was well studied for the further applications. Future directions of how to utilize these inorganic nanoparticles to be further applied in some fields, such as medicine, cosmetic and functional food additives were also investigated in this paper.

Combined Antioxidant-Antibiotic Treatment for Effectively Healing Infected Diabetic Wounds Based on Polymer Vesicles

Infected diabetic wounds are difficult to heal due to high reactive oxygen species (ROS) concentrations and recurrent infections. Such wounds can easily deteriorate into a diabetic ulcer, a chronic diabetic complication with a very high mortality rate. Herein, we propose a combined antioxidant-antibiotic therapy based on poly(ε-caprolactone)-block-poly(glutamic acid) polymer vesicle to treat infected diabetic wounds. This was realized by in situ decoration of stable, well-dispersed ceria nanoparticles onto ciprofloxacin (CIP)-loaded polymer vesicles. These resulting CIP-loaded and ceria-decorated polymer vesicles (CIP-Ceria-PVs) exhibited high superoxide dismutase mimetic activity to inhibit superoxide free radicals (the inhibition rate reached ∼50% at an extremely low cerium concentration of 1.25 μg/mL). When the cerium content is in the range of 5-20 μg/mL, the CIP-Ceria-PVs showed the highest protective capability to normal L02 cells from damage of superoxide free radicals. In addition, the CIP-Ceria-PVs exhibited enhanced antibacterial activity (the dosage of CIP in CIP-Ceria-PVs was reduced by 25-50% compared to free CIP). In vivo treatment of infected diabetic wounds was performed on a diabetic mice model. The CIP-Ceria-PVs could effectively cure infected diabetic wounds within 14 days. Overall, a combined antioxidant-antibiotic therapy was proposed by introducing ceria nanoparticles and CIP into polymer vesicles for the treatment of infected diabetic wounds.

Ceria-Incorporated Biopolymer for Preventing Fungal Adhesion

Although biopolymers are widely used in biomedical fields, the issue of poor antimicrobial properties remains unsolved, leading to a potential increase in infections. Here, ceria nanoparticles (CNPs) were incorporated into a representative biopolymer, poly(methyl methacrylate) (PMMA), for drug-free antimicrobial properties. After characterizing the CNPs and surface/mechanical properties of the CNP-PMMA nanocomposite, antiadhesive effects against Candida albicans, the most common fungal species responsible for fungal infections, were determined using metabolic activity assays, and the underlying microbial antiadhesive mechanism was revealed. Hydrothermally fabricated CNPs showed a size of ∼20 nm with a zeta potential of 12 ± 2.3 mV and showed catalytic properties as a ROS modulator. Successful incorporation of CNPs into PMMA up to 2 wt % was confirmed by EDS analysis. The surface roughness and mechanical properties such as flexural strength and modulus were relatively unchanged up to 2 wt %. In contrast, the surface energy increased, and the Vickers hardness decreased in the 2 wt % PMMA compared with the control. A drop of up to 90% of adherent Candida albicans was observed in CNP-incorporated PMMA, which was confirmed and quantified via fungus staining images. The antiadhesive mechanism was revealed from the direct antimicrobial effects of CNP via the upregulation of the intracellular ROS level. Taken together, the antimicrobial-adhesive properties of the CNP-PMMA nanocomposite suggest the potential usefulness of CNP as a promising drug-free antimicrobial ingredient for biopolymers, which could lead to the prevention of microbial-induced complications in clinical settings.

Simultaneous Removal and Recovery of Metal Ions and Dyes from Wastewater through Montmorillonite Clay Mineral

The main objective of this work was to evaluate the potential of Montmorillonite nanoclay (Mt), readily and inexpensively available, for the simultaneous adsorption (and removal) of two classes of pollutants: metal ions and dyes. The attention was focused on two "model" pollutants: Ce(III) and crystal violet (CV). The choice is due to the fact that they are widespread in wastewaters of various origins. These characteristics, together with their effect on human health, make them ideal for studies on water remediation. Moreover, when separated from wastewater, they can be recycled individually in industrial production with no or simple treatment. Clay/pollutant hybrids were prepared under different pH conditions and characterized through the construction of the adsorption isotherms and powder X-ray diffraction. The adsorption behavior of the two contaminants was revealed to be significantly different: the Langmuir model reproduces the adsorption isotherm of Ce(III) better, thus indicating that the clay offers a unique adsorption site to the metal ions, while the Freundlich model proved to be the most reliable for the uptake of CV which implies heterogeneity of adsorption sites. Moreover, metal ions do not adsorb at all under acidic conditions, whereas the dye is able to adsorb under all the investigated conditions. The possibility to modulate the adsorption features by simply changing the pH conditions was successfully employed to develop an efficient protocol for the removal and separation of the different components from aqueous solutions mimicking wastewaters.

Effect of Cerium Precursor in the Synthesis of Ce-MCM-41 and in the Efficiency for Liquid-Phase Oxidation of Benzyl Alcohol

Understanding the effects of synthetic parameters in the catalytic activity of heterogeneous catalysts is of utmost importance when aiming for optimal reaction conditions. Hence, we disclose in this work the synthesis and characterization of cerium-modified MCM-41 materials. In addition, it was observed for the first time, differences in catalytic activity when using different cerium synthetic precursors: CeCl3·7H2O and Ce(NO3)3·6H2O (Ce-MCM-Cl and Ce-MCM-NO3, respectively). A mechanism for cerium incorporation in MCM-41 was proposed, where [Ce(OH)3] species were hydrogen bonded to silicate anions, forming framework Ce-O-Si bonds during condensation and, consequently, causing distortion of the typical hexagonal mesophase. It was also observed that Ce(OH)3 formed aggregated layers with template assemblies during synthesis, resulting in non-framework CeO2 species on the MCM-41 surface after calcination. These CeO2 species were preferentially formed for Ce-MCM-NO3 and were attributed to the nitrate ions’ strong binding to template molecules. In the solvent free liquid-phase oxidation of benzyl alcohol (BzOH), Ce-MCM-Cl achieved better BzOH conversions and benzaldehyde (BzD) yields, while Ce-MCM-NO3 offered increased BzD selectivity. The catalysts’ reusability was also studied over three catalytic runs, where Ce-MCM-NO3 was more resistant than Ce-MCM-Cl towards deactivation. The observed catalytic behavior shows the importance of metal precursors in the obtainment of materials with desirable final properties.

Surface properties of ceria synthesised using Triton-X based reverse microemulsions

The effect of the tail length of Triton-X surfactants on the surface properties of ceria prepared by means of reversed micelles and Ce(OⁱPr)₄ has been systematically studied. Generally, solids with increased surface areas (up to 136 m² g⁻¹) were synthesised. It was shown that the tail length strongly affects the surface characteristics. Further studies were carried out using UV-Vis, ATR-FTIR, XRD and TGA/DSC studies of the precursor gels as well as N₂-isothermal adsorption BET, XRD, FT-IR, UV-Vis diffuse reflectance and SEM investigations of the final solids samples. An interaction mechanism between the ceria precursor molecules and the polar tail of the reversed Triton X micelles and the formation of ceria (CeO₂) particles in the aqueous nucleus of the reversed microemulsions is proposed.

The effect of the tail length of Triton-X surfactants on the surface properties of ceria prepared by means of reversed micelles and Ce(OⁱPr)₄ has been systematically studied.

Mesoporous cerium oxide for fast degradation of aryl organophosphate flame retardant triphenyl phosphate

Cerium oxide nanoparticles were prepared by calcination of basic cerous carbonate (as a precursor) obtained by precipitation from an aqueous solution. Prepared samples were characterized by X-ray diffraction (XRD), infrared spectroscopy (FTIR), high resolution scanning electron microscopy (HRSEM), BET (Brunauer–Emmett–Teller) surface area and porosity measurement. Prepared cerium oxide was applied as a destructive sorbent for the fast and safe degradation of organophosphorus flame retardant triphenyl phosphate (TPP). It was shown that cerium dioxide was effective in the decomposition of TPP by cleavage of the P–O–aryl bond in the flame retardant molecule. A degradation mechanism for TPP on the ceria surface was proposed. The degradation is governed by conversion of TPP via diphenyl phosphate (DPP) to the final product identified as phenol (Ph). The key parameter increasing the degradation efficiency of CeO₂ is the temperature of calcination. At optimum calcination temperature (500 °C), the produced ceria retains a sufficiently high surface area and attains an optimum degree of crystallinity (related to a number of crystal defects, and thus potential reactive sites). The fast and efficient degradation of organophosphorus flame retardant TPP was observed in a polar aprotic solvent (acetonitrile) that is miscible with water.

Cerium oxide nanoparticles were prepared by calcination of basic cerous carbonate (as a precursor) obtained by precipitation from an aqueous solution and subsequent tested for catalytic activity.

Tuning the porosity and surface characteristics of nanoporous titania using non-ionic surfactant reverse micelles

Nanoporous titania was prepared from non-ionic surfactant reverse micelles (e.g. Triton-X) and the effects of the chain length of the surfactants and calcination temperature of the precursor gels on the surface properties of the product (mesoporous titania) were investigated. The studies included sample characterization of the precursor gels from the titania samples characterized by UV-Vis, ATR-FTIR, XRD, TGA/DSC and the titania samples by N₂-adsorption BET, XRD, FT-IR, UV-Vis diffuse reflectance and SEM measurements after calcination at 400 °C, 500 °C, 600 °C, 700 °C and 800 °C. According to the experimental results, generally increasing the length of the polar tail of Triton-X results in an increased specific surface area and volume, and an average pore diameter of the solids. Moreover, increasing the length of the polar tail is associated with a smaller crystallite size and higher thermal stability of the materials. Finally, a nucleation mechanism of the titania particles within the aqueous centre of the reversed micelles is proposed.

Nanoporous titania was prepared from non-ionic reverse micelles, and the effects of chain length and calcination temperature of the mother gels were investigated.

Targeted Delivery and Redox Activity of Folic Acid-Functionalized Nanoceria in Tumor Cells

Cerium oxide nanoparticles (nanoceria) are promising catalytic nanomaterials that are widely reported to modulate intracellular reactive oxygen species (ROS). In this study, nanoceria were synthesized by flame spray pyrolysis and functionalized with a cell-targeting ligand, folic acid (FA). The surface functionalization of nanoceria was stable, and FA enhanced the uptake of nanoceria via folate receptors. Internalized nanoceria and FA-nanoceria were localized predominantly in the cytoplasm. FA-nanoceria modulated intracellular ROS to a greater extent than the nanoceria in colon carcinoma cells, but induced ROS in ovarian cancer cells, likely due to their enhanced uptake. Together these data demonstrated that the functionalization of nanoceria with FA modulated their endocytosis and redox activity, and they may find application in the delivery of anticancer drugs in the future.

Antimicrobial Activity of Cerium Oxide Nanoparticles on Opportunistic Microorganisms: A Systematic Review

An evaluation of studies of biologically active nanoparticles provides guidance for the synthesis of nanoparticles with the goal of developing new antibiotics/antifungals to combat microbial resistance. This review article focuses on the physicochemical properties of cerium oxide nanoparticles (CeNPs) with antimicrobial activity. Method. This systematic review followed the Guidelines for Transparent Reporting of Systematic Reviews and Meta-Analyses. Results. Studies have confirmed the antimicrobial activity of CeNPs (synthesized by different routes) using nitrate or chloride salt precursors and having sizes less than 54 nm. Conclusion. Due to the lack of standardization in studies with respect to the bacteria and CeNP concentrations assayed, comparisons between studies to determine more effective routes of synthesis are difficult. The mechanism of CeNP action likely occurs through oxidative stress of components in the cell membrane of the microorganism. During this process, a valence change occurs on the CeNP surface in which an electron is gained and Ce⁴⁺ is converted to Ce³⁺.

Synergistic effect of VOx and MnOx surface species for improved performance of V2O5/Ce0.5Ti0.5−xMnxO2−δ catalysts in low-temperature NH3-SCR of NO

Inserting adjacent Mn³⁺/Mn²⁺ and VO³⁺/VO²⁺ redox couples in Ce_1−xTi_xO₂ improves catalytic performance.

Electrospinning of CeO2 nanoparticle dispersions into mesoporous fibers: on the interplay of stability and activity in the HCl oxidation reaction

High-surface-area CeO₂ fibers are obtained from a specially developed nanoparticle dispersion and are used as catalysts in the HCl oxidation reaction.

Impacts of cerium oxide nanoparticles on bacterial community in activated sludge

Rapidly developing industry raises concerns about the environmental impacts of nanoparticles, but the effects of inorganic nanoparticles on bacterial community in wastewater treatment remain unclear. The present research assessed the impact of cerium oxide nanoparticles (nCeO) on the microbiome of activated sludge system. The results showed that 18,330 over 28,201 reads generated from control samples were assigned to Proteobacteria while 5527 reads (19.6%), 3260 reads (11.567%), and 719 reads (2.55%) were assigned to unclassified_Bacteria, Firmicutes and Actinobacteria, respectively. When stressed with nCeO₂ NPs, a decrease on reads was noted with 53, 48, 27.7 and 24% assigned to Proteobacteria. Gammaproteobacteria (80.57%) was found to be the most predominant Proteobacteria. The impact of nCeO₂ NPs was also observed on pollutants removal as only 1.83 and 35.15% of phosphate and nitrate could be removed in the bioreactor stressed with 40 mg-nCeO₂-NPs/L. This was confirmed by a drastic reduction of activities for enzymes catalysing denitrification (NaR and NiR) and degradation of polyphosphate (ADK and PPK). ADK appeared to be the most affected enzyme with activity decrease reaching over 90% when stressed with 10 mg-nCeO₂/L. Furthermore, bacterial diversity was not significantly different whereas their species richness showed significant difference between control and treated samples. A large number of reads from control samples could not be classified down to the lower taxonomic level "genera" suggesting hitherto vast untapped microbial diversity. The denitrification related genera including Trichococcus and Acinetobacter were found to alternatively dominating treated samples highlighting those nCeO₂ NPs could enhance the growth of some bacterial species while inhibiting those of others. Nevertheless, the study indicates that nCeO₂ NPs in wastewater at very high concentrations may have some adverse effects on activated sludge process as they inhibit the removal of phosphate.

Environmentally friendly synthesis of CeO2 nanoparticles for the catalytic oxidation of benzyl alcohol to benzaldehyde and selective detection of nitrite

Cerium oxide nanoparticles (CeO₂ NPs) are favorable in nanotechnology based on some remarkable properties. In this study, the crystalline CeO₂ NPs are successfully prepared by an efficient microwave combustion (MCM) and conventional route sol-gel (CRSGM) methods. The structural morphology of the as-prepared CeO₂ NPs was investigated by various spectroscopic and analytical techniques. Moreover, the XRD pattern confirmed the formation of CeO₂ NPs as a face centered cubic structure. The magnetometer studies indicated the low saturation magnetization (23.96 emu/g) of CeO₂ NPs for weak paramagnetic and high saturation magnetization (32.13 emu/g) of CeO₂ NPs for super paramagnetic. After that, the oxidation effect of benzyl alcohol was investigated which reveals good conversion and selectivity. Besides, the CeO₂ NPs modified glassy carbon electrode (GCE) used for the detection of nitrite with linear concentration range (0.02–1200 μM), low limit of detection (0.21 μM) and higher sensitivity (1.7238 μAμM⁻¹ cm⁻²). However, the CeO₂ NPs modified electrode has the fast response, high sensitivity and good selectivity. In addition, the fabricated electrode is applied for the determination of nitrite in various water samples. Eventually, the CeO₂ NPs can be regarded as an effective way to enhance the catalytic activity towards the benzyl alcohol and nitrite.

Deep eutectic-solvothermal synthesis of nanostructured ceria

Ceria is a technologically important material with applications in catalysis, emissions control and solid-oxide fuel cells. Nanostructured ceria becomes profoundly more active due to its enhanced surface area to volume ratio, reactive surface oxygen vacancy concentration and superior oxygen storage capacity. Here we report the synthesis of nanostructured ceria using the green Deep Eutectic Solvent reline, which allows morphology and porosity control in one of the less energy-intensive routes reported to date. Using wide Q-range liquid-phase neutron diffraction, we elucidate the mechanism of reaction at a molecular scale at considerably milder conditions than the conventional hydrothermal synthetic routes. The reline solvent plays the role of a latent supramolecular catalyst where the increase in reaction rate from solvent-driven pre-organization of the reactants is most significant. This fundamental understanding of deep eutectic-solvothermal methodology will enable future developments in low-temperature synthesis of nanostructured ceria, facilitating its large-scale manufacturing using green, economic, non-toxic solvents.

Disinfection effects of undoped and silver-doped ceria powders of nanometer crystallite size

Being endowed with an ability of capturing and releasing oxygen, the ceria surface conventionally assumes the role of catalyzing redox reactions in chemistry. This catalytic effect also makes possible its cytotoxicity toward microorganisms at room temperature. To study this cytotoxicity, we synthesized the doped and undoped ceria particles of 8-9 nm in size using an inexpensive precipitation method and evaluated their disinfecting aptitudes with the turbidimetric and plate count methods. Among the samples being analyzed, the silver-doped ceria exhibits the highest sterilization ability, yet the undoped ceria is the most intriguing. The disinfection effect of undoped ceria is moderate in magnitude, demanding a physical contact between the ceria surface and bacteria cell wall, or the redox catalysis that can damage the cell wall and result in the cell killing. Evidently, this effect is short-range and depends strongly on dispersion of the nanoparticles. In contrast, the disinfection effects of silver-doped ceria reach out several millimeters since it releases silver ions to poison the surrounding microorganisms. Additionally, the aliovalent silver substitution creates more ceria defects. The synergetic combination, silver poisoning and heterogeneous redox catalysis, lifts and extends the disinfecting capability of silver-doped ceria to a superior level.

Silica coating influences the corona and biokinetics of cerium oxide nanoparticles

BACKGROUND

The physicochemical properties of nanoparticles (NPs) influence their biological outcomes.

METHODS

We assessed the effects of an amorphous silica coating on the pharmacokinetics and pulmonary effects of CeO2 NPs following intratracheal (IT) instillation, gavage and intravenous injection in rats. Uncoated and silica-coated CeO2 NPs were generated by flame spray pyrolysis and later neutron-activated. These radioactive NPs were IT-instilled, gavaged, or intravenously (IV) injected in rats. Animals were analyzed over 28 days post-IT, 7 days post-gavage and 2 days post-injection.

RESULTS

Our data indicate that silica coating caused more but transient lung inflammation compared to uncoated CeO2. The transient inflammation of silica-coated CeO2 was accompanied by its enhanced clearance. Then, from 7 to 28 days, clearance was similar although significantly more (141)Ce from silica-coated (35%) was cleared than from uncoated (19%) (141)CeO2 in 28 days. The protein coronas of the two NPs were significantly different when they were incubated with alveolar lining fluid. Despite more rapid clearance from the lungs, the extrapulmonary (141)Ce from silica-coated (141)CeO2 was still minimal (<1%) although lower than from uncoated (141)CeO2 NPs. Post-gavage, nearly 100% of both NPs were excreted in the feces consistent with very low gut absorption. Both IV-injected (141)CeO2 NP types were primarily retained in the liver and spleen. The silica coating significantly altered the plasma protein corona composition and enhanced retention of (141)Ce in other organs except the liver.

CONCLUSION

We conclude that silica coating of nanoceria alters the biodistribution of cerium likely due to modifications in protein corona formation after IT and IV administration.

Exposure to Cerium Oxide Nanoparticles Is Associated With Activation of Mitogen-activated Protein Kinases Signaling and Apoptosis in Rat Lungs

Objectives:

With recent advances in nanoparticle manufacturing and applications, potential exposure to nanoparticles in various settings is becoming increasing likely. No investigation has yet been performed to assess whether respiratory tract exposure to cerium oxide (CeO₂) nanoparticles is associated with alterations in protein signaling, inflammation, and apoptosis in rat lungs.

Methods:

Specific-pathogen-free male Sprague-Dawley rats were instilled with either vehicle (saline) or CeO₂ nanoparticles at a dosage of 7.0 mg/kg and euthanized 1, 3, 14, 28, 56, or 90 days after exposure. Lung tissues were collected and evaluated for the expression of proteins associated with inflammation and cellular apoptosis.

Results:

No change in lung weight was detected over the course of the study; however, cerium accumulation in the lungs, gross histological changes, an increased Bax to Bcl-2 ratio, elevated cleaved caspase-3 protein levels, increased phosphorylation of p38 MAPK, and diminished phosphorylation of ERK-1/2-MAPK were detected after CeO₂ instillation (p<0.05).

Conclusions:

Taken together, these data suggest that high-dose respiratory exposure to CeO₂ nanoparticles is associated with lung inflammation, the activation of signaling protein kinases, and cellular apoptosis, which may be indicative of a long-term localized inflammatory response.

Antioxidant cerium oxide nanoparticle hydrogels for cellular encapsulation

Oxidative stress and the resulting radical by-products cause significant toxicity and graft loss in cellular transplantation. Here, the engineering of an auto-catalytic, antioxidant, self-renewing cerium oxide nanoparticle (CONP)-composite hydrogel is reported. This enzyme-mimetic material ubiquitously scavenges ambient free radicals, with the potential to provide indefinite antioxidant protection. The potential of this system to enhance the protection of encapsulated beta cells was evaluated. Co-incubation of CONPs free in solution with beta cells demonstrated potent cytoprotection from superoxide exposure; however, phagocytosis of the CONPs by the beta cells resulted in cytotoxicity at concentrations as low as 1mM. When CONPs were embedded within alginate hydrogels, the composite hydrogel provided cytoprotection to encapsulated beta cells from free radical attack without cytotoxicity, even up to 10mM. This nanocomposite hydrogel has wide applicability in cellular transplantation, with the unique advantage of localization of these potent antioxidant CONPs and their capacity for sustained, long-term scavenging.

Effect of ceria on the organization and bio-ability of anatase fullerene-like crystals

The presence of Ce atoms induce the formation of fullerene-like structures and increase the oxygen storage capacity of the anatase. It was demonstrated that such special effects can be exploited to modulate fibroblast proliferation.

Shape-controlled ceria-based nanostructures for catalysis applications

Among oxide catalysts, ceria is a technologically important material because of its wide applications as a promoter in three-way catalysts for the elimination of toxic exhaust gases, low-temperature water-gas-shift reaction, oxygen sensors, oxygen permeation membrane systems, and fuel cells. The catalytic activities of cerium oxide are highly dependent on interfacial structures and nanocrystal morphologies. This Minireview highlights the recent progress in the research of ceria nanoshapes as both catalysts and catalyst supports, including the synthesis, structure characterization, catalytic properties, surface chemistry, as well as reaction mechanisms. Insights from in situ spectroscopy study and theoretical modeling of nanostructured ceria-based materials have shed light on the origin of the ceria shape effect. It is suggested that the surface structure of ceria controls the catalytic activity and selectivity through structure-dependent surface-site geometry, surface vacancy formation energy, defect sites, and coordinatively unsaturated sites on ceria. The morphology-dependent catalysis in ceria has offered a new strategy to finely tune the catalytic activity and selectivity through shape control without altering the catalyst composition. A brief summary and an outlook on this research field will be presented at the end.

Cellular interaction and toxicity depend on physicochemical properties and surface modification of redox-active nanomaterials

The study of the chemical and biological properties of CeO2 nanoparticles (CNPs) has expanded recently due to its therapeutic potential, and the methods used to synthesize these materials are diverse. Moreover, conflicting reports exist regarding the toxicity of CNPs. To help resolve these discrepancies, we must first determine whether CNPs made by different methods are similar or different in their physicochemical and catalytic properties. In this paper, we have synthesized several forms of CNPs using identical precursors through a wet chemical process but using different oxidizer/reducer; H2O2 (CNP1), NH4OH (CNP2), or hexamethylenetetramine (HMT-CNP1). Physicochemical properties of these CNPs were extensively studied and found to be different depending on the preparation methods. Unlike CNP1 and CNP2, HMT-CNP1 was readily taken into endothelial cells and the aggregation can be visualized using light microscopy. Exposure to HMT-CNP1 also reduced cell viability at a 10-fold lower concentration than CNP1 or CNP2. Surprisingly, exposure to HMT-CNP1 led to substantial decreases in ATP levels. Mechanistic studies revealed that HMT-CNP1 exhibited substantial ATPase (phosphatase) activity. Though CNP2 also exhibits ATPase activity, CNP1 lacked ATPase activity. The difference in catalytic (ATPase) activity of different CNPs preparation may be due to differences in their morphology and oxygen extraction energy. These results suggest that the combination of increased uptake and ATPase activity of HMT-CNP1 may underlie the biomechanism of the toxicity of this preparation of CNPs and may suggest that ATPase activity should be considered when synthesizing CNPs for use in biomedical applications.

Shape-controlled synthesis and catalytic application of ceria nanomaterials

Because of their excellent properties and extensive applications, ceria nanomaterials have attracted much attention in recent years. This perspective provides a comprehensive review of current research activities that focus on the shape-controlled synthesis methods of ceria nanostructures. We elaborate on the synthesis strategies in the following four sections: (i) oriented growth directed by the crystallographic structure of cerium-based materials; (ii) oriented growth directed by the use of an appropriate capping reagent; (iii) growth confined or dictated by various templates; (iv) other potential methods for generating CeO(2) nanomaterials. In this perspective, we also discuss the catalytic applications of ceria nanostructures. They are often used as active components or supports in many catalytic reactions and their catalytic activities show morphology dependence. We review the morphology dependence of their catalytic performances in carbon monoxide oxidation, water-gas shift, nitric oxide reduction, and reforming reactions. At the end of this review, we give a personal perspective on the probable challenges and developments of the controllable synthesis of CeO(2) nanomaterials and their catalytic applications.

Dispersion and surface functionalization of oxide nanoparticles for transparent photocatalytic and UV-protecting coatings and sunscreens

This review describes recent efforts on the synthesis, dispersion and surface functionalization of the three dominating oxide nanoparticles used for photocatalytic, UV-blocking and sunscreen applications: titania, zinc oxide, and ceria. The gas phase and liquid phase synthesis is described briefly and examples are given of how weakly aggregated photocatalytic or UV-absorbing oxide nanoparticles with different composition, morphology and size can be generated. The principles of deagglomeration are reviewed and the specific challenges for nanoparticles highlighted. The stabilization of oxide nanoparticles in both aqueous and non-aqueous media requires a good understanding of the magnitude of the interparticle forces and the surface chemistry of the materials. Quantitative estimates of the Hamaker constants in various media and measurements of the isoelectric points for the different oxide nanoparticles are presented together with an overview of different additives used to prepare stable dispersions. The structural and chemical requirements and the various routes to produce transparent photocatalytic and nanoparticle-based UV-protecting coatings, and UV-blocking sunscreens are described and discussed.