On inverse miniemulsion polymerization of conventional water-soluble monomers

Fabrication of polymeric microspheres for biomedical applications

Polymeric microspheres (PMs) have attracted great attention in the field of biomedicine in the last several decades due to their small particle size, special functionalities shown on the surface and high surface-to-volume ratio. However, how to fabricate PMs which can meet the clinical needs and transform laboratory achievements to industrial scale-up still remains a challenge. Therefore, advanced fabrication technologies are pursued. In this review, we summarize the technologies used to fabricate PMs, including emulsion-based methods, microfluidics, spray drying, coacervation, supercritical fluid and superhydrophobic surface-mediated method and their advantages and disadvantages. We also review the different structures, properties and functions of the PMs and their applications in the fields of drug delivery, cell encapsulation and expansion, scaffolds in tissue engineering, transcatheter arterial embolization and artificial cells. Moreover, we discuss existing challenges and future perspectives for advancing fabrication technologies and biomedical applications of PMs.

Investigation of the Effectiveness of Photo Deprotection of Polypeptides in Solution and within the Core of Miniemulsion-Derived Nanoparticles

Homopolymerization of ortho-nitrobenzyl (oNB)-protected l-cysteine and l-glutamic acid was systematically studied in different solvents and at different monomer to initiator ratios, revealing the best reaction control in dimethylformamide (DMF) across a range of degrees of polymerization. In the subsequent ultraviolet (UV)-cleavage studies, it was found that quantitative deprotection upon UV exposure at 365 nm was not achievable for either of the homopolypeptides as confirmed by 1H NMR and UV/visible (UV/vis) analyses. While the poly(oNB-l-cysteine) deprotected more readily with no effect of the polypeptide molecular weight, lower molecular weight poly(oNB-l-glutamate) reached maximum deprotection faster than high molecular weight samples. This was further confirmed by the pH changes of the solution. When incorporated into the core of miniemulsion-derived nanoparticles, both oNB-protected copolypeptides were successfully deprotected as evident from a color change and a pH change in the case of poly(oNB-l-glutamate). However, the removal of the deprotection byproduct nitrosobenzaldehyde proved unsuccessful, which indicates a diffusion barrier caused by the nanoparticle's surfactant. The study provides insights and guidelines for the UV deprotection of polypeptides and demonstrates the ability to selectively UV-deprotect polypeptides in the confined space of a nanoparticle dispersion.

Hybrid nanogels by direct mixing of chitosan, tannic acid and magnetite nanoparticles: processes involved in their formation and potential catalytic properties

Magnetite (Fe3O4) nanoparticles (MNPs) as nanocatalysts have drawn considerable attention because of their unique properties such as peroxidase-like activity. However, their biodistribution and availability for specific treatments still need to be improved. In this study, a simple and convenient strategy for the synthesis of hybrid nanogels (NGs) is described, which involves direct mixing of biomaterials such as chitosan (Ch) and tannic acid (TA), with the incorporation of MNPs, under oxidising conditions, using the inverse nanoemulsion method. The different processes involved in the formation of these hybrid nanosystems as well as their morphological and chemical structure are investigated using optical, spectroscopic, and electron microscopic techniques (DLS, UV-VIS, FT-IR, XPS, TEM, and SEM-EDS). It is demonstrated that ∼11 nm synthesized MNPs, post-functionalized with oxidised TA, act as covalent crosslinkers. As a proof of concept, the potential use of these materials in nanocatalytic medicine was evaluated using a colorimetric method based on the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in hydrogen peroxide. The results show that these hybrid nanogels have the same peroxidase-like activity as bare MNPs, indicating that the organic nanostructure stabilises the inorganic nanoparticles without any significant change in the catalytic properties. Therefore, this kind of nanomaterial has promising potential for use in nanocatalytic medicine with improved biocompatibility and biodistribution.

Molecularly confined hydration in thermoresponsive hydrogels for efficient atmospheric water harvesting

Water scarcity is a pressing global issue, requiring innovative solutions such as atmospheric water harvesting (AWH), which captures moisture from the air to provide potable water to many water-stressed areas. Thermoresponsive hydrogels, a class of temperature-sensitive polymers, demonstrate potential for AWH as matrices for hygroscopic components like salts predominantly due to their relatively energy-efficient desorption properties compared to other sorbents. However, challenges such as limited swelling capacity due to the salting-out effect and difficulty in more complete water release hinder the effectiveness of conventional hydrogel sorbents. To overcome these limitations, we introduce molecularly confined hydration in thermoresponsive hydrogels by employing a bifunctional polymeric network composed of hygroscopic zwitterionic moieties and thermoresponsive moieties. Here, we show that this approach ensures stable water uptake, enables water release at relatively low temperatures, and exhibits rapid sorption-desorption kinetics. Furthermore, by incorporating photothermal absorbers, the sorbent can achieve solar-driven AWH with comparable water release performance. This work advances the design of AWH sorbents by introducing molecularly confined hydration in thermoresponsive hydrogels, leading to a more efficient and sustainable approach to water harvesting. Our findings offer a potential solution for advanced sorbent design with comprehensive performance to mitigate the freshwater crisis.

Core–shell Microgels Having Zwitterionic Hydrogel Core and Temperature-responsive Shell Prepared via Inverse Miniemulsion RAFT Polymerization

Stimuli-responsive core–shell microgels are of significant interest because of their fascinating applications due to the different swelling/shrinkage properties of their core and shell networks. Because such stimuli-responsive core–shell microgels are...

Alginate Nanohydrogels as a Biocompatible Platform for the Controlled Release of a Hydrophilic Herbicide

The large-scale application of volatile and highly water-soluble pesticides to guarantee crop production can often have negative impacts on the environment. The main loss pathways are vapor drift, direct volatilization, or leaching of the active substances. Consequently, the pesticide can either accumulate and/or undergo physicochemical transformations in the soil. In this scenario, we synthesized alginate nanoparticles using an inverse miniemulsion template in sunflower oil and successfully used them to encapsulate a hydrophilic herbicide, i.e., dicamba. The formulation and process conditions were adjusted to obtain a unimodal size distribution of nanohydrogels of about 20 nm. The loading of the nanoparticles with dicamba did not affect the nanohydrogel size nor the particle stability. The release of dicamba from the nanohydrogels was also tested: the alginate nanoparticles promoted the sustained and prolonged release of dicamba over ten days, demonstrating the potential of our preparation method to be employed for field application. The encapsulation of hydrophilic compounds inside our alginate nanoparticles could enable a more efficient use of pesticides, minimizing losses and thus environmental spreading. The use of biocompatible materials (alginate, sunflower oil) also guarantees the absence of toxic additives in the formulation.

Soft synthetic microgels as mimics of mycoplasma

Artificial model colloids are of special interest in the development of advanced sterile filters, as they are able to efficiently separate pleomorphic, highly deformable and infectious bacteria such as mycoplasma, which, until now, has been considered rather challenging and laborious. This study presents a full range of different soft to super soft synthetic polymeric microgels, including two types with similar hydrodynamic mean diameter, i.e., 180 nm, and zeta potential, i.e., -25 ± 10 mV, but different deformability, synthesized by inverse miniemulsion terpolymerization of acrylamide, sodium acrylate and N,N'-methylenebisacrylamide. These microgels were characterized by means of dynamic, electrophoretic and static light scattering techniques. In addition, the deformability of the colloids was investigated by filter cake compressibility studies during ultrafiltration in dead-end mode, analogously to a study of real mycoplasma, i.e., Acholeplasma laidlawii, to allow for a direct comparison. The results indicate that the variation of the synthesis parameters, i.e., crosslinker content, polymeric solid content and content of sodium acrylate, has a significant impact on the swelling behavior of the microgels in aqueous solution as well as on their deformability under filtration conditions. A higher density of chemical crosslinking points results in less swollen and more rigid microgels. Furthermore, these parameters determine electrokinetic properties of the more or less permeable colloids. Overall, it is shown that these soft synthetic microgels can be obtained with tailor-made properties, covering the size of smallest species of and otherwise similar to real mycoplasma. This is a relevant first step towards the future use of synthetic microgels as mimics for mycoplasma.

Zwitterionic Nanogels and Microgels: An Overview on Their Synthesis and Applications

Zwitterionic polymers by virtue of their unique chemical and physical attributes have attracted researchers in recent years. The simultaneous presence of positive and negative charges in the same repeat unit renders them of various interesting properties such as superhydrophilicity, which has significantly broadened their scope for being used in different applications. Among polyzwitterions of different architectures, micro- and/or nano-gels have started receiving attention only until recently. These 3D cross-linked colloidal structures show peculiar characteristics in context to their solution properties, which are attributable either to the comonomers present or the presence of different electrolytes and biological specimens. In this review, a concise yet detailed account is provided of the different synthetic techniques and application domains of zwitterion-based micro- and/or nanogels that have been explored in recent years. Here, the focus is kept solely on the "polybetaines," which have garnered maximum research interest and remain the extensively studied polyzwitterions in literature. While their vast application potential in the biomedical sector is being detailed here, some other areas of scope such as using them as microreactors for the synthesis of metal nanoparticles or making smart membranes for water-treatment are discussed in this minireview as well.

Nanostructures, Thermoresponsiveness, and Assembly Mechanism of Hydrogel Microspheres during Aqueous Free-Radical Precipitation Polymerization

Although techniques to produce uniformly sized hydrogel microspheres (microgels) by aqueous free-radical precipitation polymerization are well established, the details of the polymerization process remain mysterious. In the present study, the structural evolution and thermoresponsiveness of the developing microgels during the polymerization were evaluated by temperature-controlled high-speed atomic force microscopy. This analysis clarified that the swelling properties of the precursor microgels formed in the early stages of the polymerization are quite low due to the high incorporation of cross-linkers and that non-thermoresponsive deca-nanosized spherical domains are already present in the precursor microgels. Furthermore, we succeeded in tracking the formation of nuclei and their growth process, which has never been fully understood, in aqueous solution by real-time observations. These findings will help us to design functional microgels with the desired nanostructures via precipitation polymerization.

Biocompatible polypeptide nanogel: Effect of surfactants on nanogelation in inverse miniemulsion, in vivo biodistribution and blood clearance evaluation

Horseradish peroxidase (HRP)/H₂O₂-mediated crosslinking of polypeptides in inverse miniemulsion is a promising approach for the development of next-generation biocompatible and biodegradable nanogels. Herein, we present a fundamental investigation of the effects of three surfactants and their different concentrations on the (HRP)/H₂O₂-mediated nanogelation of poly[N⁵-(2-hydroxyethyl)-l-glutamine-ran-N⁵-propargyl-l-glutamine-ran-N⁵-(6-aminohexyl)-l-glutamine]-ran-N⁵-[2-(4-hydroxyphenyl)ethyl)-l-glutamine] (PHEG-Tyr) in inverse miniemulsion. The surfactants sorbitan monooleate (SPAN 80), polyoxyethylenesorbitan trioleate (TWEEN 85), and dioctyl sulfosuccinate sodium salt (AOT) were selected and their influence on the nanogel size, size distribution, and morphology was evaluated. The most effective nanogelation stabilization was achieved with 20 wt% nonionic surfactant SPAN 80. The diameter of the hydrogel nanoparticles was 230 nm (dynamic light scattering, DLS) and was confirmed also by nanoparticle tracking analysis (NTA) which showed the diameters ranging from 200 to 300 nm. Microscopy and image analyses showed that the nanogel in the dry state was spherical in shape and had number-average diameter D_n = 26 nm and dispersity Р= 1.91. In the frozen-hydrated state, the nanogel appeared porous and was larger in size with D_n = 182 nm and Р= 1.52. Our results indicated that the nanogelation of the polymer precursor required a higher concentration of surfactant than classical inverse miniemulsion polymerization to ensure effective stabilization. The developed polypeptide nanogel was radiolabeled with ¹²⁵I, and in vivo biodistribution and blood clearance evaluations were performed. We found that the ¹²⁵I-labeled nanogel was well-biodistributed in the bloodstream, cleared from mouse blood during 48 h by renal and hepatic pathways and did not provoke any sign of toxic effects.

Kinetic Analysis of Ultrasound-Induced Oil Exchange in Oil-in-Water Emulsions through Contrast Variation Time-Resolved Small-Angle Neutron Scattering

Ultrasound is one of the most commonly used methods for synthesizing and processing emulsion systems. In this study, the kinetics of acoustically induced emulsion oil exchange was examined using contrast variation time-resolved small-angle neutron scattering (CV-SANS). A custom-built sample environment was used to deliver acoustic forces while simultaneously performing CV-SANS experiments. It was observed that the oil exchange rate was significantly accelerated when sonicating at high acoustic pressures, where violent cavitation events can induce droplet coalescence and breakup. No significant oil exchange occurred at acoustic pressures below the cavitation threshold within the short time scales of the experiments. It was also observed that the oil exchange kinetics was deterred when emulsions were stabilized by surfactants. In addition, oil exchange rates varied nonlinearly with the concentration of surfactant, and exchange was slowest when the emulsions were stabilized by an intermediate concentration. It is hypothesized that emulsion size, electrostatic repulsion, and Gibbs elasticity of the oil-water interface play significant roles in the observed trends. The observed trends in oil exchange rates versus surfactant concentration coincide well with theoretical models for the fluctuation of the elasticity of the interface. Acoustically induced oil exchange was most inefficient when the interfacial elasticity was at its maximum value.

Magnetic Polyurea Nano-Capsules Synthesized via Interfacial Polymerization in Inverse Nano-Emulsion

Polyurea (PU) nano-capsules have received voluminous interest in various fields due to their biocompatibility, high mechanical properties, and surface functionality. By incorporating magnetic nanoparticle (MNPs) into the polyurea system, the attributes of both PU and MNPs can be combined. In this work, we describe a facile and quick method for preparing magnetic polyurea nano-capsules. Encapsulation of ionic liquid-modified magnetite nanoparticles (MNPs), with polyurea nano-capsules (PU NCs) having an average size of 5–20 nm was carried out through interfacial polycondensation between amine and isocyanate monomers in inverse nano-emulsion (water-in-oil). The desired magnetic PU NCs were obtained utilizing toluene and triple-distilled water as continuous and dispersed phases respectively, polymeric non-ionic surfactant cetyl polyethyleneglycol/polypropyleneglycol-10/1 dimethicone (ABIL EM 90), diethylenetriamine, ethylenediamine diphenylmethane-4,4′-diisocyanate, and various percentages of the ionic liquid-modified MNPs. High loading of the ionic liquid-modified MNPs up to 11 wt% with respect to the dispersed aqueous phase was encapsulated. The magnetic PU NCs were probed using various analytical instruments including electron microscopy, infrared spectroscopy, X-ray diffraction, and nuclear magnetic spectroscopy. This unequivocally manifested the successful synthesis of core-shell polyurea nano-capsules even without utilizing osmotic pressure agents, and confirmed the presence of high loading of MNPs in the core.

Stimulus-responsive polymeric nanogels as smart drug delivery systems

Nanogels are three-dimensional nanoscale networks formed by physically or chemically cross-linking polymers. Nanogels have been explored as drug delivery systems due to their advantageous properties, such as biocompatibility, high stability, tunable particle size, drug loading capacity, and possible modification of the surface for active targeting by attaching ligands that recognize cognate receptors on the target cells or tissues. Nanogels can be designed to be stimulus responsive, and react to internal or external stimuli such as pH, temperature, light and redox, thus resulting in the controlled release of loaded drugs. This "smart" targeting ability prevents drug accumulation in non-target tissues and minimizes the side effects of the drug. This review aims to provide an introduction to nanogels, their preparation methods, and to discuss the design of various stimulus-responsive nanogels that are able to provide controlled drug release in response to particular stimuli. STATEMENT OF SIGNIFICANCE: Smart and stimulus-responsive drug delivery is a rapidly growing area of biomaterial research. The explosive rise in nanotechnology and nanomedicine, has provided a host of nanoparticles and nanovehicles which may bewilder the uninitiated reader. This review will lay out the evidence that polymeric nanogels have an important role to play in the design of innovative drug delivery vehicles that respond to internal and external stimuli such as temperature, pH, redox, and light.

Non-Thermoresponsive Decanano-sized Domains in Thermoresponsive Hydrogel Microspheres Revealed by Temperature-Controlled High-Speed Atomic Force Microscopy

Despite the tremendous efforts devoted to the structural analysis of hydrogel microspheres (microgels), many details of their structures remain unclear. Reported in this study is that thermoresponsive poly(N-isopropyl acrylamide) (pNIPAm)-based microgels exhibit not only the widely accepted core-shell structures, but also inhomogeneous decanano-sized non-thermoresponsive spherical domains within their dense cores, which was revealed by temperature-controlled high-speed atomic force microscopy (TC-HS-AFM). Based on a series of experiments, it is concluded that the non-thermoresponsive domains are characteristic for pNIPAm microgels synthesized by precipitation polymerization, and plausible structures for microgels prepared by other polymerization techniques are proposed.

Gold Nanoparticles in Photonic Crystals Applications: A Review

This review concerns the recently emerged class of composite colloidal photonic crystals (PCs), in which gold nanoparticles (AuNPs) are included in the photonic structure. The use of composites allows achieving a strong modification of the optical properties of photonic crystals by involving the light scattering with electronic excitations of the gold component (surface plasmon resonance, SPR) realizing a combination of absorption bands with the diffraction resonances occurring in the body of the photonic crystals. Considering different preparations of composite plasmonic-photonic crystals, based on 3D-PCs in presence of AuNPs, different resonance phenomena determine the optical response of hybrid crystals leading to a broadly tunable functionality of these crystals. Several chemical methods for fabrication of opals and inverse opals are presented together with preparations of composites plasmonic-photonic crystals: the influence of SPR on the optical properties of PCs is also discussed. Main applications of this new class of composite materials are illustrated with the aim to offer the reader an overview of the recent advances in this field.

A holistic review of hydrogel applications in the adsorptive removal of aqueous pollutants: Recent progress, challenges, and perspectives

Due to the unique physical and chemical characteristics of hydrogels, such as hydrophilicity, swellability, and modifiability, there is increasing research interest in the development and application of novel hydrogels in water and wastewater treatment. Hydrogels have exhibited superior performance in the adsorptive removal of a wide range of aqueous pollutants including heavy metals, nutrients, and toxic dyes. However, there remain certain challenges which need to be addressed in order to evolve hydrogel based treatment systems from the lab-scale to practical applications. This review provides a coverage of the latest developments in the application of hydrogels for the adsorptive removal of aqueous pollutants. A holistic overview of different steps involved in the hydrogel based treatment systems is provided, and the influencing factors and mechanisms of pollutants removal are reviewed. Major challenges pertaining to adsorption kinetics, operational pH range, interference, and hydrogel recovery are examined. Important considerations such as stability and reusability of hydrogels and resource recovery are also discussed, for economic and sustainability concerns.

Block copolymer synthesis by controlled/living radical polymerisation in heterogeneous systems

We review the range of CLRP-controlled syntheses of block copolymer particles in dispersed systems, which are being exploited to create new opportunities for the design of nanostructured soft materials.

Synthesis of poly(ethylene-co-butylene)-block-poly(ethylene oxide) surfactant and its use in the synthesis of polyhydroxyethyl methacrylate nanoparticles containing azo-dye

A new poly(ethylene-co-butylene)-block-poly(ethylene oxide) surfactant was synthesized and used in inverse miniemulsion polymerization of 2-hydroxyethyl methacrylate with encapsulated Disperse Red 1.

Biocompatible macro-initiators controlling radical retention in microfluidic on-chip photo-polymerization of water-in-oil emulsions

A series of water-soluble macro-initiators is synthesized to avoid radical loss in microfluidic on-chip photo cross-linking of hyaluronic acid methacrylate-containing water-in-oil emulsions. Their superior performance over known photo-initiators through the generation of water-soluble radicals and excellent biocompatibility are demonstrated.

Synthesis of nanostructured materials in inverse miniemulsions and their applications

Polymeric nanogels, inorganic nanoparticles, and organic-inorganic hybrid nanoparticles can be prepared via the inverse miniemulsion technique. Hydrophilic functional cargos, such as proteins, DNA, and macromolecular fluoresceins, may be conveniently encapsulated in these nanostructured materials. In this review, the progress of inverse miniemulsions since 2000 is summarized on the basis of the types of reactions carried out in inverse miniemulsions, including conventional free radical polymerization, controlled/living radical polymerization, polycondensation, polyaddition, anionic polymerization, catalytic oxidation reaction, sol-gel process, and precipitation reaction of inorganic precursors. In addition, the applications of the nanostructured materials synthesized in inverse miniemulsions are also reviewed.