Surface activity of Janus particles adsorbed at fluid-fluid interfaces: Theoretical and experimental aspects

Entropy-favorable adsorption of polymer-grafted nanoparticles at fluid-fluid interfaces

The adsorption of polymer-grafted nanoparticles at interfaces is a problem of fundamental interest in physics and soft materials. This adsorption behavior is governed by the interplay between interaction potentials and entropic effects. Here, we use molecular dynamics simulations and umbrella sampling methods to study the adsorption behavior of a Janus-like homopolymer-grafted nanoparticle at fluid-fluid interfaces. By calculating the potential of the mean force as the particle moves from fluid A to the interface, the adsorption energy Ea can be obtained. When two homopolymer chains with types A and B are grafted to the opposite poles of the particle, Ea shows a scaling behavior with respect to chain length N: Ea ∝ N0.598. This is determined by the interactions between polymers and fluids. The enthalpy dominates, and the entropy effects mainly come from the rotational entropy loss of the polymer-grafted nanoparticle at interfaces, which disfavors the stabilization of particles at interfaces. When the grafted polymer number m is large, the adsorption energy exhibits a linear dependence on m. While the enthalpy dominates the behavior, the entropy becomes significant at a larger chain length of N = 15, where the configurational entropy of the polymer chains dominates the entropy of the system. The globule-coil transition occurs when polymers move from poor solvents to good solvents, increasing the configurational entropy and favoring the stabilization of particles at interfaces. Our study provides novel insights into the stabilization mechanism of polymer-grafted nanoparticles at interfaces and reveals the stabilization mechanism favored by the configurational entropy of grafted polymer chains.

Mechanism of the Decrease in Surface Tension by Bulk Nanobubbles (Ultrafine Bubbles)

The mechanism of the decrease in the surface tension of water containing bulk nanobubbles (ultrafine bubbles) is studied theoretically by numerical simulations of the adsorption of bulk nanobubbles at the liquid's surface based on the dynamic equilibrium model for the stability of a bulk nanobubble under the conditions of the Tuziuti experiment (Tuziuti, T., et al., Langmuir, 2023, 39, 5771-5778). It is predicted that the concentration of bulk nanobubbles in the bulk liquid decreases considerably with time, as many bulk nanobubbles are gradually adsorbed at the liquid's surface. A part of the decrease in surface tension is due to the Janus-like structure of a bulk nanobubble that could partly break the hydrogen bond network of water molecules at the liquid's surface because more than 50% of the bubble's surface is covered with hydrophobic impurities, according to the dynamic equilibrium model. The theoretically estimated decrease in surface tension due to the Janus-like structure of a bulk nanobubble agrees with the experimental data of the decrease in surface tension solely by bulk nanobubbles obtained by the comparison of before and after the elimination of bulk nanobubbles by the freeze-thaw process. This effect cannot be explained by the electric charge stabilization model widely discussed for the stability of a bulk nanobubble, although the present model is only applicable to the solution containing hydrophobic impurities. Another part of the decrease in surface tension should be due to impurities produced from a nanobubble generator, such as a mechanical seal, which was partly confirmed by the TOC measurements.

Heterogeneous Dynamics of Sheared Particle-Laden Fluid Interfaces with Janus Particle Doping

The formation of particle clusters can substantially modify the dynamics and mechanical properties of suspensions in both two and three dimensions. While it has been well established that large network-spanning clusters increase the rigidity of particle systems, it is still unclear how the presence of localized nonpercolating clusters affects the dynamics and mechanical properties of particle suspensions. Here, we introduce self-assembled localized particle clusters at a fluid-fluid interface by mixing a fraction of Janus particles in a monolayer of homogeneous colloids. Each Janus particle binds to a few nearby homogeneous colloids, resulting in numerous small clusters uniformly distributed across the interface. Using a custom magnetic rod interfacial stress rheometer, we apply linear oscillatory shear to the particle-laden fluid interface. By analyzing the local affine deformation of particles from optical microscopy, we show that particles in localized clusters experience substantially lower shear-induced stretching than their neighbors outside clusters. We hypothesize that such heterogeneous dynamics induced by particle clusters increase the effective surface coverage of particles, which in turn enhances the shear moduli of the interface, as confirmed by direct interfacial rheological measurements. Our study illustrates the microscopic dynamics of small clusters in a shear flow and reveals their profound effects on the macroscopic rheology of particle-laden fluid interfaces. Our findings open an avenue for designing interfacial materials with improved mechanical properties via the control of formation of localized particle clusters.

Janus Ligand-Tethered Nanoparticles at Liquid-Liquid Interfaces

We investigate the structural properties of Janus ligand-tethered nanoparticles at liquid-liquid interfaces using coarse-grained molecular dynamics simulations. The effect of interactions between different chains and liquids is discussed. We consider the Janus particles with symmetrical interactions with the liquids which correspond to supplementary wettability and particles with uncorrelated interactions. Simulation results indicate that the Janus hairy particles trapped in the interface region have different configurations characterized by the vertical displacement distance, the orientation of the Janus line relative to the interface, and the particle shape. The Janus hairy particles present abundant morphologies, including dumbbell-like and typical core-shell, at the interface. The shape of adsorbed particles is analyzed in detail. The simulation data are compared with those predicted by a simple phenomenological approach. This work can promote the applications of Janus hairy particles in nanotechnology.

Decrease in the Surface Tension of Nanobubble Dispersion in Water: Results of Surface Excess of Bulk Nanobubbles at Interfaces

The effect of nanobubbles (NBs) on the surface tension of liquid was investigated by three methods of different measuring principles, pendant drop (PD), Wilhelmy, and du Noüy methods, over a wide range of number concentration of bulk NBs (BNBs). In all of the three methods, the surface tension decreased in proportion to the number concentration of BNBs and the proportional constant was different among the three methods. Such behavior was inferred to be caused by the surface excess of BNBs at the gas-liquid or solid-liquid interface. In the PD method, the hydrophobic interaction between BNBs and air around a drop seems to cause the surface excess of BNBs along the surface of water drops. It brings about a subtle change in its profile, resulting in the decrease in surface tension, which takes a time of hundreds of seconds. Meanwhile, in the Wilhelmy and du Noüy methods, electrostatic attractive force between BNBs and a plate or ring is a likely cause of surface excess at the solid-liquid interface, resulting in the instantaneous decrease in surface tension. This study also provides a practical methodology of comparison for surface tension of NB dispersion: surface tension shall be compared among different samples with the same measurement method. Especially in the PD method, retention time of droplets before measurement shall be the same among samples.

Hybrid Nanoparticles at Fluid-Fluid Interfaces: Insight from Theory and Simulation

Hybrid nanoparticles that combine special properties of their different parts have numerous applications in electronics, optics, catalysis, medicine, and many others. Of the currently produced particles, Janus particles and ligand-tethered (hairy) particles are of particular interest both from a practical and purely cognitive point of view. Understanding their behavior at fluid interfaces is important to many fields because particle-laden interfaces are ubiquitous in nature and industry. We provide a review of the literature, focusing on theoretical studies of hybrid particles at fluid-fluid interfaces. Our goal is to give a link between simple phenomenological models and advanced molecular simulations. We analyze the adsorption of individual Janus particles and hairy particles at the interfaces. Then, their interfacial assembly is also discussed. The simple equations for the attachment energy of various Janus particles are presented. We discuss how such parameters as the particle size, the particle shape, the relative sizes of different patches, and the amphiphilicity affect particle adsorption. This is essential for taking advantage of the particle capacity to stabilize interfaces. Representative examples of molecular simulations were presented. We show that the simple models surprisingly well reproduce experimental and simulation data. In the case of hairy particles, we concentrate on the effects of reconfiguration of the polymer brushes at the interface. This review is expected to provide a general perspective on the subject and may be helpful to many researchers and technologists working with particle-laden layers.

Application of Janus Particles in Point-of-Care Testing

Janus particles (JPs), named after the two-faced Roman god, are asymmetric particles with different chemical properties or polarities. JPs have been widely used in the biomedical field in recent years, including as drug carriers for targeted controlled drug release and as biosensors for biological imaging and biomarker detection, which is crucial in the early detection and treatment of diseases. In this review, we highlight the most recent advancements made with regard to Janus particles in point-of-care testing (POCT). Firstly, we introduce several commonly used methods for preparing Janus particles. Secondly, we present biomarker detection using JPs based on various detection methods to achieve the goal of POCT. Finally, we discuss the challenges and opportunities for developing Janus particles in POCT. This review will facilitate the development of POCT biosensing devices based on the unique properties of Janus particles.

Tuning the rheology and microstructure of particle-laden fluid interfaces with Janus particles

HYPOTHESIS

Particle-laden fluid interfaces are the central component of many natural and engineering systems. Understanding the mechanical properties and improving the stability of such interfaces are of great practical importance. Janus particles, a special class of heterogeneous colloids, might be used as an effective surface-active agent to control the assembly and interfacial rheology of particle-laden fluid interfaces.

EXPERIMENTS

Using a custom-built interfacial stress rheometer, we explore the effect of Janus particle additives on the interfacial rheology and microscopic structure of particle-laden fluid interfaces.

FINDINGS

We find that the addition of a small amount of platinum-polystyrene (Pt-PS) Janus particles within a monolayer of PS colloids (1:40 number ratio) can lead to more than an order-of-magnitude increase in surface moduli with enhanced elasticity, which improves the stability of the interface. This drastic change in interfacial rheology is associated with the formation of local particle clusters surrounding each Janus particle. We further explain the origin of local particle clusters by considering the interparticle interactions at the interface. Our experiments reveal the effect of local particle structures on the macroscopic rheological behaviors of particle monolayers and demonstrate a new way to tune the microstructure and mechanical properties of particle-laden fluid interfaces.

Multiphase Microreactors Based on Liquid-Liquid and Gas-Liquid Dispersions Stabilized by Colloidal Catalytic Particles

Pickering emulsions, foams, bubbles, and marbles are dispersions of two immiscible liquids or of a liquid and a gas stabilized by surface-active colloidal particles. These systems can be used for engineering liquid-liquid-solid and gas-liquid-solid microreactors for multiphase reactions. They constitute original platforms for reengineering multiphase reactors towards a higher degree of sustainability. This Review provides a systematic overview on the recent progress of liquid-liquid and gas-liquid dispersions stabilized by solid particles as microreactors for engineering eco-efficient reactions, with emphasis on biobased reagents. Physicochemical driving parameters, challenges, and strategies to (de)stabilize dispersions for product recovery/catalyst recycling are discussed. Advanced concepts such as cascade and continuous flow reactions, compartmentalization of incompatible reagents, and multiscale computational methods for accelerating particle discovery are also addressed.

Investigating Time-Dependent Active Motion of Janus Micromotors using Dynamic Light Scattering

Advances in fabrication methods have positioned Janus micromotors (JMs) as candidates for use as autonomous devices in applications across diverse fields, spanning drug delivery to environmental remediation. While the design of most micromotors is straightforward, the non-steady state active motion exhibited by these systems is complex and difficult to characterize. Traditionally, JM active motion is characterized using optical microscopy single particle tracking for systems confined in 2D. Dynamic light scattering (DLS) offers an alternative high-throughput method for characterizing the 3D active motion in bulk JM dispersions with additional capabilities to quantify time-dependent behavior for a broader range of JM sizes. Here, the active motion of spherical JMs is examined by DLS and it is demonstrated that the method enables decoupling of the translational and rotational diffusion. Systematic studies quantifying the time-dependent diffusive properties as a function of fuel concentration, JM concentration, and time after fuel addition are presented. The analyses presented in this work position DLS to facilitate future advances of JM systems by serving as a fast-screening characterization method for active motion.

Foaming and rheological properties of aqueous solutions: an interfacial study

Although aqueous foam is composed of simple fluids, air and water, it shows a complex rheological behavior. It exhibits solid-like behavior at low shear and fluid-like behavior at high shear rate. Therefore, understanding such behavior is important for many industrial applications in foods, pharmaceuticals, and cosmetics. Additionally, air–water interface of bubble surface plays an important role in the stabilizing mechanism of foams. Therefore, the rheological properties associated with the aqueous foam highly depend on its interfacial properties. In this review, a systematic study of aqueous foam are presented primarily from rheology point of view. Firstly, foaming agents, surfactants and particles are described; then foam structure was explained, followed by change in structure under applied shear. Finally, foam rheology was linked to interfacial rheology for the interface containing particles whose surface properties were altered by surfactants.

Synthesis of Polymer Janus Particles with Tunable Wettability Profiles as Potent Solid Surfactants to Promote Gas Delivery in Aqueous Reaction Media

Janus particles exhibit a strong tendency to directionally assemble and segregate to interfaces and thus offer advantages as colloidal analogues of molecular surfactants to improve the stability of multiphasic mixtures. Investigation and application of the unique adsorption properties require synthetic procedures that enable careful design and reliable control over the particles' asymmetric chemistry and wettability profiles with high morphological uniformity across a sample. Herein, we report on a novel one-step synthetic approach for the generation of amphiphilic polymer Janus particles with highly uniform and tunable wettability contrasts, which is based on using reconfigurable bi-phasic Janus emulsions as versatile particle scaffolds. Two phase-separated acrylate oils were used as the constituent droplet phases and transformed into their solidified Janus particle replicas via UV-induced radical polymerization. Using Janus emulsions as particle precursors offers the advantage that their internal droplet geometry can be fine-tuned by changing the force balance of surface tensions acting at the individual interfaces via surfactants or the volume ratio of the constituent phases. In addition, preassembled functional surfactants at the droplet interfaces can be locked in position upon polymerization, which enables both access toward postfunctionalization reaction schemes and the generation of highly uniform Janus particles with adjustable wettability profiles. Depending on the particle morphology and wettability, their interfacial position can be adjusted, which allows us to stabilize either air bubbles-in-water or water droplets-in-air (liquid marbles). Motivated by the interfacial activity of the particles and particularly the longevity of the resulting particle-stabilized air-in-water bubbles, we explored their ability to promote the delivery of oxygen inside a liquid-phase reaction medium, namely, for the heterogeneous Au-NP-mediated catalytic oxidation of d-glucose. We observed a 2.2-fold increase in the reaction rate attributed to the increase of the local concentration of oxygen around catalysts, thus showcasing a new strategy to overcome the limited solubility of gases in aqueous reaction media.

Derjaguin-Landau-Verwey-Overbeek energy landscape of a Janus particle with a nonuniform cap

A colloidal particle is often termed "Janus" when some portion of its surface is coated by a second material which has distinct properties from the native particle. The anisotropy of Janus particles enables unique behavior at interfaces. However, rigorous methodologies to predict Janus particle dynamics at interfaces are required to implement these particles in complex fluid applications. Previous work studying Janus particle dynamics does not consider van der Waals interactions and realistic, nonuniform coating morphology. Here we develop semianalytic equations to accurately calculate the potential landscape, including van der Waals interactions, of a Janus particle with nonuniform coating thickness above a solid boundary. The effects of both nonuniform coating thickness and van der Waals interactions significantly influence the potential landscape of the particle, particularly in high ionic strength solutions, where the particle samples positions very close to the solid boundary. The equations developed herein facilitate more simple, accurate, and less computationally expensive characterization of conservative interactions experienced by a confined Janus particle than previous methods.

Janus Particles at Fluid Interfaces: Stability and Interfacial Rheology

The use of the Janus motif in colloidal particles, i.e., anisotropic surface properties on opposite faces, has gained significant attention in the bottom-up assembly of novel functional structures, design of active nanomotors, biological sensing and imaging, and polymer blend compatibilization. This review is focused on the behavior of Janus particles in interfacial systems, such as particle-stabilized (i.e., Pickering) emulsions and foams, where stabilization is achieved through the binding of particles to fluid interfaces. In many such applications, the interface could be subjected to deformations, producing compression and shear stresses. Besides the physicochemical properties of the particle, their behavior under flow will also impact the performance of the resulting system. This review article provides a synopsis of interfacial stability and rheology in particle-laden interfaces to highlight the role of the Janus motif, and how particle anisotropy affects interfacial mechanics.

Equilibrium Orientation and Adsorption of an Ellipsoidal Janus Particle at a Fluid–Fluid Interface

We investigate the equilibrium orientation and adsorption process of a single, ellipsoidal Janus particle at a fluid–fluid interface. The particle surface comprises equally sized parts that are hydrophobic or hydrophilic. We present free energy models to predict the equilibrium orientation and compare the theoretical predictions with lattice Boltzmann simulations. We find that the deformation of the fluid interface strongly influences the equilibrium orientation of the Janus ellipsoid. The adsorption process of the Janus ellipsoid can lead to different final orientations determined by the interplay of particle aspect ratio and particle wettablity contrast.

Brownian Diffusion of Individual Janus Nanoparticles at Water/Oil Interfaces

Janus nanoparticles could exhibit a higher interfacial activity and adsorb stronger to fluid interfaces than homogeneous nanoparticles of similar sizes. However, little is known about the interfacial diffusion of Janus nanoparticles and how it compares to that of homogeneous ones. Here, we employed fluorescence correlation spectroscopy to study the lateral diffusion of ligand-grafted Janus nanoparticles adsorbed at water/oil interfaces. We found that the diffusion was significantly slower than that of homogeneous nanoparticles. We carried out dissipative particle dynamic simulations to study the mechanism of interfacial slowdown. Good agreement between experimental and simulation results has been obtained only provided that the flexibility of ligands grafted on the nanoparticle surface was taken into account. The polymeric ligands were deformed and oriented at an interface so that the effective radius of Janus nanoparticles is larger than the nominal one obtained by measuring the diffusion in bulk solution. These findings highlight further the critical importance of the ligands grafted on Janus nanoparticles for applications involving nanoparticle adsorption at an interface, such as oil recovery or two-dimensional self-assembly.

Pt-SiO2 Janus Particles and the Water/Oil Interface: A Competition between Motility and Thermodynamics

Various aspects of the behavior of Janus particles near liquid/liquid interfaces have been studied through different experimental and theoretical realizations, but the effect of motility on the behavior of Janus particles near liquid/liquid interfaces has not been investigated, yet. Here, we demonstrate the ability to engineer the behavior of highly interfacial active Janus particles near a water/oil interface by introducing motility to the system. Passive, i.e., nonmotile, platinum-capped 8 μm silica (Pt-SiO₂) Janus particles exhibit a strong tendency to attach to water/oil interfaces with the Pt-cap facing the oil and the SiO₂ side facing the water phase. In contrast, we show that active, i.e., motile, 8 μm Pt-SiO₂ Janus particles approach the interface, orient in a sideways fashion with the Janus boundary perpendicular to the interface, and then swim in the vicinity of the interface similar to observations reported near solid/liquid interfaces. Active Pt-SiO₂ Janus particles near the water/oil interface show motility as a result of adding H₂O₂ to the particle solution. The decomposition of H₂O₂ into O₂ and H₂O creates a nonuniform gradient of O₂ around the particle that hydrodynamically interacts with the water/decalin boundary. The interaction enables rotation of the particle within the swimming plane that is parallel to the interface but restricts rotation in and out of the swimming plane, thereby preventing adsorption to the liquid/liquid interface.

Self-assembly of Janus Au:Fe3O4 branched nanoparticles. From organized clusters to stimuli-responsive nanogel suprastructures

Janus nanoparticles offer enormous possibilities through a binary selective functionalization and dual properties. Their self-assembly has attracted strong interest due to their potential as building blocks to obtain molecular colloids, supracrystals and well-organized nanostructures that can lead to new functionalities. However, this self-assembly has been focused on relatively simple symmetrical morphologies, while for complex nanostructures this process has been unexplored. Here, we study the assembly of plasmonic-magnetic Janus nanoparticles with a branched (nanostar) - sphere morphology. The branched morphology enhances their plasmonic properties in the near-infrared region and therefore their applicability, but at the same time constrains their self-assembly capabilities to obtain more organized or functional suprastructures. We describe the self-assembly of these nanoparticles after amphiphilic functionalization. The role of the nanoparticle branching, as well as the size of the polymer-coating, is explored. We show how the use of large molecular weight stabilizing polymers can overcome the anisotropy of the nanoparticles producing a change in the morphology from small clusters to larger quasi-cylindrical nanostructures. Finally, the Janus nanoparticles are functionalized with a thermo-responsive elastin-like recombinamer. These nanoparticles undergo reversible self-assembly in the presence of free polymer giving rise to nanoparticle-stabilized nanogel-like structures with controlled size, providing the possibility to expand their applicability to multi-stimuli controlled self-assembly.

A one-pot route to stable Pickering emulsions featuring nanocrystalline Ag and Au

A simple one-pot scheme yielding stable Pickering emulsions with Au or Ag nanoparticle surfactants is described. The dimensions and temporal stability of emulsion droplets as well the nanoparticle surfactants are studied.

Impact of Surface Amphiphilicity on the Interfacial Behavior of Janus Particle Layers under Compression

Langmuir monolayers of silica/gold Janus particles with two different degrees of amphiphilicity have been examined to study the significance of particle surface amphiphilicity on the structure and mechanical properties of the interfacial layers. The response of the layers to the applied compression provides insight into the nature and strength of the interparticle interactions. Different collapse modes observed for the interfacial layers are linked to the amphiphilicity of Janus particles and their configuration at the interface. Molecular dynamics simulations on nanoparticles with similar contact angles provide insight on the arrangement of particles at the interface and support our conclusion that the interfacial configuration and collapse of anisotropic particles at the air/water interface are controlled by particle amphiphilicity.

Amphiphilic Dimers at Liquid-Liquid Interfaces: A Density Functional Approach

We apply density functional theory to study the structure of dimers at the interface between two partially miscible symmetric liquids. The dimers are built of two tangentially jointed spheres and do not solve the coexisting liquids. The interactions in the system are modeled using Lennard-Jones potentials with different interactions between segments of the dimers and the liquid components. We study how asymmetry of the interactions between dimers and molecules of the liquid, i.e., the degree of dimer amphiphilicity, influences the interfacial structure. Two unexpected phenomena have been found. First, for some systems, the liquid-liquid interface is able to accommodate only a finite amount of dimers. If the amount of added dimers is larger than a threshold value, a part or all of the dimers move to the interior one of the coexisting phase, forming an insoluble sheet inside it, or the initial interface splits into separate parts. The second is a peculiar behavior of the dependence of the interfacial width with an increase of the amount of added dimers. In this case, we observe a discontinuous jump that is connected with reorientation of dimers with respect to the interface.

Formation and assembly of amphiphilic Janus nanoparticles promoted by polymer interactions

Almost three decades after de Gennes have introduced the term Janus for particles possessing two faces with different chemical nature, Janus particles are currently a hot topic in itself. Although de Gennes was not concerned with the size of particles, due to the advent and perspectives of nanotechnology, nanosized Janus particles have particularly received great attention. The capacity of having two antagonistic properties within the same particle has attracted interest on Janus nanoparticles for innumerous potential applications. It took some years for the studies about Janus nanoparticles to finally see great advances, mainly due to the progress in nanoparticle synthesis. What de Gennes might have not predicted (or at least he did not mention it during his speech) is that intermolecular interactions between polymers would be of immense importance to the actual achievement of Janus nanoparticles. Moreover, these interactions can also have large effects on the assembly process of amphiphilic Janus nanoparticles, which is important to form hierarchical structures and new materials at different scales. Hence, it is interesting to notice that de Gennes' contribution for the polymer field has been influencing the preparation and the controlled assembly of Janus nanoparticles. This article attempts to summarize empirical studies where noncovalent forces between polymers played a role, either on the production of Janus nanoparticles or on their assembly.

Hybrid Janus Particles: Challenges and Opportunities for the Design of Active Functional Interfaces and Surfaces

Janus particles are a unique class of multifunctional patchy particles combining two dissimilar chemical or physical functionalities at their opposite sides. The asymmetry characteristic for Janus particles allows them to self-assemble into sophisticated structures and materials not attainable by their homogeneous counterparts. Significant breakthroughs have recently been made in the synthesis of Janus particles and the understanding of their assembly. Nevertheless, the advancement of their applications is still a challenging field. In this Review, we highlight recent developments in the use of Janus particles as building blocks for functional materials. We provide a brief introduction into the synthetic strategies for the fabrication of JPs and their properties and assembly, outlining the existing challenges. The focus of this Review is placed on the applications of Janus particles for active interfaces and surfaces. Active functional interfaces are created owing to the stabilization efficiency of Janus particles combined with their capability for interface structuring and functionalizing. Moreover, Janus particles can be employed as building blocks to fabricate active functional surfaces with controlled chemical and topographical heterogeneity. Ultimately, we will provide implications for the rational design of multifunctional materials based on Janus particles.

Facile Strategy for the Synthesis of Gold@Silica Hybrid Nanoparticles with Controlled Porosity and Janus Morphology

Hybrid materials prepared by encapsulation of plasmonic nanoparticles in porous silica systems are of increasing interest due to their high chemical stability and applications in optics, catalysis and biological sensing. Particularly promising is the possibility of obtaining gold@silica nanoparticles (Au@SiO₂ NPs) with Janus morphology, as the induced anisotropy can be further exploited to achieve selectivity and directionality in physical interactions and chemical reactivity. However, current methods to realise such systems rely on the use of complex procedures based on binary solvent mixtures and varying concentrations of precursors and reaction conditions, with reproducibility limited to specific Au@SiO₂ NP types. Here, we report a simple one-pot protocol leading to controlled crystallinity, pore order, monodispersity, and position of gold nanoparticles (AuNPs) within mesoporous silica by the simple addition of a small amount of sodium silicate. Using a fully water-based strategy and constant content of synthetic precursors, cetyl trimethylammonium bromide (CTAB) and tetraethyl orthosilicate (TEOS), we prepared a series of four silica systems: (A) without added silicate, (B) with added silicate, (C) with AuNPs and without added silicate, and (D) with AuNPs and with added silicate. The obtained samples were characterised by transmission electron microscopy (TEM), small angle X-ray scattering (SAXS), and UV-visible spectroscopy, and kinetic studies were carried out by monitoring the growth of the silica samples at different stages of the reaction: 1, 10, 15, 30 and 120 min. The analysis shows that the addition of sodium silicate in system B induces slower MCM-41 nanoparticle (MCM-41 NP) growth, with consequent higher crystallinity and better-defined hexagonal columnar porosity than those in system A. When the synthesis was carried out in the presence of CTAB-capped AuNPs, two different outcomes were obtained: without added silicate, isotropic mesoporous silica with AuNPs located at the centre and radial pore order (C), whereas the addition of silicate produced Janus-type Au@SiO₂ NPs (D) in the form of MCM-41 and AuNPs positioned at the silica⁻water interface. Our method was nicely reproducible with gold nanospheres of different sizes (10, 30, and 68 nm diameter) and gold nanorods (55 × 19 nm), proving to be the simplest and most versatile method to date for the realisation of Janus-type systems based on MCM-41-coated plasmonic nanoparticles.

Patchy colloidal particles at the fluid-fluid interface

Colloidal particles have significantly different characteristics when they are at interfaces from when they are in the bulk. In this study, we applied Monte Carlo simulations to investigate the stability and dynamics of smooth patchy particles and rough patchy particles near or at the fluid-fluid interface. By adjusting the surface area ratio of the two faces of a smooth Janus particle, we show how its stability, in terms of free energy, in either side of the interface can be tuned relative to the smooth homogeneous particle. We demonstrate how roughness can affect the stability and the orientation of a colloidal particle. Moreover, position-dependent diffusion constants in directions parallel and perpendicular to the interface are calculated for the colloidal particles as a function of distance from the interface. We report drastic slowdowns in the perpendicular diffusivity (and less severe slowdowns for the parallel diffusivity) for all the colloidal particles when they approach the fluid-fluid interface. While such a slowdown is well-known for the fluid-solid interface in the literature in terms of frictional force in hydrodynamics, why this happens for the fluid-fluid interface has not been adequately discussed. We provide evidence for the decrease in terms of discrepancy in the fluid density that leads to depletion forces.

Current status and future developments in preparation and application of nonspherical polymer particles

Nonspherical polymer particles (NPPs) are nano/micro-particulates of macromolecules that are anisotropic in shape, and can be designed anisotropic in chemistry. Due to shape and surface anisotropies, NPPs bear many unique structures and fascinating properties which are distinctly different from those of spherical polymer particles (SPPs). In recent years, the research on NPPs has surprisingly blossomed in recent years, and many practical materials based on NPPs with potential applications in photonic device, material science and biomedical engineering have been generated. In this review, we give a systematic, balanced and comprehensive summary of the main aspects of NPPs related to their preparation and application, and propose perspectives for the future developments of NPPs.

Particles adsorbed at various non-aqueous liquid-liquid interfaces

Particles adsorbed at liquid interfaces are commonly used to stabilise water-oil Pickering emulsions and water-air foams. The fundamental understanding of the physics of particles adsorbed at water-air and water-oil interfaces is improving significantly due to novel techniques that enable the measurement of the contact angle of individual particles at a given interface. The case of non-aqueous interfaces and emulsions is less studied in the literature. Non-aqueous liquid-liquid interfaces in which water is replaced by other polar solvents have properties similar to those of water-oil interfaces. Nanocomposites of non-aqueous immiscible polymer blends containing inorganic particles at the interface are of great interest industrially and consequently more work has been devoted to them. By contrast, the behaviour of particles adsorbed at oil-oil interfaces in which both oils are immiscible and of low dielectric constant (ε<3) is scarcely studied. Hydrophobic particles are required to stabilise these oil-oil emulsions due to their irreversible adsorption, high interfacial activity and elastic shell behaviour.

Janus plasmonic-magnetic gold-iron oxide nanoparticles as contrast agents for multimodal imaging

The design of compact nanoprobes for multimodal bioimaging is a current challenge and may have a major impact on diagnostics and therapeutics. Multicomponent gold-iron oxide nanoparticles have shown high potential as contrast agents in numerous imaging techniques due to the complementary features of iron oxide and gold nanomaterials. In this paper we describe novel gold-iron oxide Janus magnetic-plasmonic nanoparticles as versatile nanoprobes for multimodal imaging. The nanoparticles are characterized as contrast agents for different imaging techniques, including X-ray computed tomography (CT), T₂-weighted nuclear magnetic resonance imaging (MRI), photoacoustic imaging (PA), dark-field and bright-field optical microscopy, transmission electron microscopy (TEM), and surface enhanced Raman spectroscopy (SERS). We discuss the effect of particle size and morphology on their performance as contrast agents and show the advantage of a Janus configuration. Additionally, the uptake of nanoparticles by cells can be simultaneously visualized in dark- and bright-field optical microscopy, SERS mapping, and electron microscopy. These complementary techniques allow a complete view of cell uptake in an artifact-free manner, with multiplexing capabilities, and with extra information regarding the nanoparticles' fate inside the cells. Altogether, the results obtained with these non-invasive techniques show the high versatility of these nanoparticles, the advantages of a Janus configuration, and their high potential in multipurpose biomedical applications.

Janus nanoparticles inside polymeric materials: interfacial arrangement toward functional hybrid materials

Recent advances and successes in interfacial behavior of Janus NPs at interfaces are summarized, with the hope to motivate additional efforts in the studies of Janus NPs in polymer matrix for the design of functional hybrid nanostructures and devices with engineered, desired and tailored properties for real-life applications.