Manipulating the morphology of colloidal particles via ion beam irradiation: A route to anisotropic shaping

Heat: A powerful tool for colloidal particle shaping

Colloidal particles of spherical shape are important building blocks for nanotechnological applications. Materials with tailored physical properties can be directly synthesized from self-assembled particles, as is the case for colloidal photonic crystals. In addition, colloidal monolayers and multilayers can be exploited as a mask for the fabrication of complex nanostructures via a colloidal lithography process for applications ranging from optoelectronics to sensing. Several techniques have been adopted to modify the shape of both individual colloidal particles and colloidal masks. Thermal treatment of colloidal particles is an effective route to introduce colloidal particle deformation or to manipulate colloidal masks (i.e. to tune the size of the interstices between colloidal particles) by heating them at elevated temperatures above a certain critical temperature for the particle material. In particular, this type of morphological manipulation based on thermal treatments has been extensively applied to polymer particles. Nonetheless, interesting shaping effects have been observed also in inorganic materials, in particular silica particles. Due to their much less complex implementation and distinctive shaping effects in comparison to dry etching or high energy ion beam irradiation, thermal treatments turn out to be a powerful and competitive tool to induce colloidal particle deformation. In this review, we examine the physicochemical principles and mechanisms of heat-induced shaping as well as its experimental implementation. We also explore its applications, going from tailored masks for colloidal lithography to the fabrication of colloidal assemblies directly useful for their intrinsic optical, thermal and mechanical properties (e.g. thermal switches) and even to the synthesis of supraparticles and anisotropic particles, such as doublets.

Versatile Nanoring Fabrication Assisted by Hole-mask Colloidal Lithography

Nanomaterials shaped as rings are interesting nanostructures with control of the materials properties at the nanoscale. Nanoring plasmonic resonators provide tunable optical resonances in the near-infrared with application in sensing. Fabrication of nanorings can be carried out via top-down approaches based on electron beam lithography with high control of the ring size parameters but at high cost. Alternatively, fabrication via self-assembly approaches has a higher speed/lower cost but at the cost of control of ring parameters. Current colloidal lithography approaches can provide nanoring fabrication over large areas but only of specific materials and a select set of rings (large ring diameters or small rings with ultrathin walls). We extend Hole-mask Colloidal Lithography to use ring shaped holes, allow the deposition of arbitrary materials, and allow the independent tuning of ring-wall thickness over a large range of values. We present a generic approach for the fabrication of nanorings formed from a range of materials including low cost (e.g., Cu, Al) and nonplasmonic (e.g., W) materials and with control of ring wall thickness and diameter allowing tuning of ring parameters and materials for applications in nanooptics and beyond.

Reusable Wrinkled Nanoporous Silver Film Fabricated by Plasma Treatment for Surface-Enhanced Raman Scattering Applications

A nanoporous silver film (npAgF), a promising structure for surface-enhanced Raman spectroscopy (SERS), can be fabricated by using successive O2 and Ar plasma treatments on a planar silver film. The common dealloying method for producing an npAgF involves annealing at high temperatures to produce an alloy film, as well as harsh etching using corrosive chemicals. By contrast, the plasma-based method can be applied directly to various functional substrates to produce more sophisticated npAgF structures. Herein, we report a facile fabrication method for a wrinkled npAgF (w-npAgF) for SERS applications using a thermally contractible polystyrene substrate. The w-npAgF had 3D wrinkles of the nanoporous structure and showed approximately 8 times higher SERS enhancement than did the flat npAgF. Moreover, the w-npAgF could be reused for multiple SERS measurements of different molecules by mild O2 and Ar plasma treatments after each use, in which the O2 plasma effectively removed the adsorbed organic molecules and the Ar plasma reduced silver oxide to pristine silver for subsequent SERS measurements. The wrinkled nanoporous structure was maintained after multiple mild plasma treatments for reuse. The simplicity of plasma-based fabrication and high sensitivity of w-npAgFs are promising features for the green production of low-cost and reusable 3D SERS substrates.

Construction of a Chitosan/ZnO-Based Light-Resistant Coating System to Protect Dyed Wood from Ultraviolet Irradiation via Layer-by-Layer Self-Assembly

Wood dyeing is an effective way to alleviate the supply-demand imbalance of valuable wood and improve the surface decoration of fast-growing wood. However, applications of dyed wood are limited due to the susceptibility of dyes and wood to photo-discolor and degrade under light irradiation. Thus, the improved weather resistance of dyed wood is crucial. To prevent photochromic discoloration of dyed wood, an anti-photochromic coating structure was constructed via layer-by-layer self-assembly (LbL) using chitosan and zinc oxide (ZnO). The results showed that the surface color difference of treated dyed wood was reduced by approximately 84.6% after the first 2 h of irradiation under the following conditions °C: temperature (50 °C), relative humidity (55%), and irradiation intensity (550 W/m²). However, the color of untreated dyed wood drastically changed at this stage. The reason for the decrease was that the redness and yellowness of treated dye wood were significantly reduced. The deposition of ZnO onto treated dyed wood helped to protect the wood from UV light irradiation. Chitosan bridged the dyes and complexed ZnO to enhance UV resistance. This study provides valuable information for the protection of dyed wood against light discoloration that can be used as an interior and exterior decorative material.