Effect of interlayer anions on chromium removal using Mg–Al layered double hydroxides: Kinetic, equilibrium and thermodynamic studies

Preparation of composites with MgAl-LDH-modified commercial activated carbon for the quick removal of Cr(VI) from aqueous solutions

The problem of soil and water contamination caused by Cr(VI) discharged from the dyeing, electroplating, and metallurgical industries is becoming increasingly serious, posing a potentially great threat to the environment and public health. Therefore, it is crucial to develop a fast, efficient, and cost-effective adsorbent for remediating Cr-contaminated wastewater. In this work, MgAl-LDH/commercial-activated carbon nanocomposites (LDH-CACs) are prepared with hydrothermal. The effects of preparation and reaction conditions on the composite properties are first investigated, and then its adsorption behavior is thoroughly explored. Finally, a potential adsorption mechanism is proposed by several characterizations like SEM-EDS, XRD, FTIR, and XPS. The removal of Cr(VI) reaches 72.47% at optimal conditions, and the adsorption study demonstrates that LDH-CAC@1 has an extremely rapid adsorption rate and a maximum adsorption capacity of 116.7 mg/g. The primary removal mechanisms include adsorption-coupled reduction, ion exchange, surface precipitation, and electrostatic attraction. The reusability experiment illustrates that LDH-CAC@1 exhibits promising reusability. This study provides an effective adsorbent with a remarkably fast reaction, which has positive environmental significance for the treatment of Cr(VI) wastewater.

Eutectic solvent mediated synthesis of carbonated CoFe-LDH nanorods: The effect of interlayer anion (Cl-, SO42-, CO32-) variants for comparing the bifunctional electrochemical sensing application

The unabated usage of priority anthropogenic stressors is a serious concern in the global environmental context. Pharmaceutical drugs such as furazolidone (FL) and nilutamide (NL) have far-reaching repercussions due to the presence of the reactive nitroaromatic moiety. Despite the widespread awareness regarding the dangers posed by nitroaromatic drugs, the promises to alleviate the environmental consequences of drug pollution are often unmet. Accordingly, implementing practices to monitor their presence in various media is a highly desirable, but challenging undertaking. With the advent of deep eutectic solvent-assisted synthesis, it has become possible to fabricate LDH-based sensor materials with minimal energy inputs in a sustainable and scalable manner. In this work, we have framed a series of CoFe-LDH electrocatalysts utilizing deep eutectic solvent-assisted hydrothermal strategies for the simultaneous detection of FL and NL. The CoFe-LDHs intercalated with three distinct anions, namely, (i) Cl^-, (ii) SO₄^2-, and (iii) CO₃^2- are compared so as to establish a relationship between anion intercalation and electrochemical activity. Amongst the prepared electrodes, the CF-LDH-ii/SPCE displays highly appreciable selectivity, linear response range (0.09-237.9 μM), low detetion limits (FL = 1.2 nM and NL = 3.8 nM), high sensitivity (FL = 29.71 μA μM⁻¹ cm⁻² and NL = 19.29 μA μM⁻¹ cm⁻²), good reproducibility and repeatability towards FL and NL in water and urine samples. Thus, with tailored gallery anions, the proposed electrocatalyst establishes enhanced electrocatalytic performance for the real-time analysis of pharmaceutical contaminants.

Adsorptive removal of heavy metal anions from water by layered double hydroxide: A review

High-valence heavy metals with high ecotoxicity are generally found in water in the form of anions, and this increases heavy metal pollution intensity and treatment difficulty. Recent studies have pointed to the potential efficiency of layered double hydroxides (LDHs) to meet this challenge. In this review, we retrospectively research the development of LDHs using a Java application called CiteSpace. We describe the unique layer structure, highly adjustable chemical properties, and diverse synthesis methods of LDHs, all of which decide the effective adsorption of heavy metal anions by LDHs. Subsequently, we focus on discussing the adsorption mechanism of LDHs on heavy metal anions, as well as the current state of research and future directions for microscopic interaction mechanisms. For practical applications, it is critical to improve the adsorption selectivity and stability. We then recommend solutions to improve the adsorption selectivity and stability after identifying the influencing mechanism. Finally, we provide our perspectives on the future development of LDHs adsorption of heavy metal anions.

Adsorption of Chromate Ions by Layered Double Hydroxide-Bentonite Nanocomposite for Groundwater Remediation

Herein, magnesium/aluminum-layered double hydroxide (MgAl-LDH) and bentonite (BT) nanocomposites (LDH–BT) were prepared by co-precipitation (CP), exfoliation–reassembly (ER), and simple solid-phase hybridization (SP). The prepared LDH–BT nanocomposites were preliminarily characterized by using powder X-ray diffractometry, scanning electron microscopy, and zeta-potentiometry. The chromate adsorption efficacies of the pristine materials (LDH and bentonite) and the as-prepared nanocomposites were investigated. Among the composites, the LDH–BT_SP was found to exhibit the highest chromate removal efficiency of 65.7%. The effect of varying the LDH amount in the LDH–BT composite was further investigated, and a positive relationship between the LDH ratio and chromate removal efficiency was identified. The chromate adsorption by the LDH–BT_SP was performed under various concentrations (isotherm) and contact times (kinetic). The results of the isotherm experiments were well fitted with the Langmuir and Freundlich isotherm model and demonstrate multilayer chromate adsorption by the heterogeneous LDH–BT_SP, with a homogenous distribution of LDH nanoparticles. The mobility of the as-prepared LDH–BT_SP was investigated on a silica sand-filled column to demonstrate that the mobility of the bentonite is dramatically decreased after hybridization with LDH. Furthermore, when the LDH–BT_SP was injected into a box container filled with silica sand to simulate subsurface soil conditions, the chromate removal efficacy was around 43% in 170 min. Thus, it was confirmed that the LDH–BT prepared by solid-phase hybridization is a practical clay-based nanocomposite for in situ soil and groundwater remediation.

Granulation of Nickel-Aluminum-Zirconium Complex Hydroxide Using Colloidal Silica for Adsorption of Chromium(VI) Ions from the Liquid Phase

We combined a nickel-aluminum-zirconium complex hydroxide (NAZ) with colloidal silica as a binder to prepare a granulated agent for adsorbing heavy metals from aqueous media. Three samples with different particle diameters were prepared to evaluate the effects on the properties: small (NAZ-S), medium (NAZ-M), and large (NAZ-L). We confirmed the granulation of the prepared samples at a binder content of 25%. NAZ-S had the largest specific surface area and number of hydroxyl groups, followed by NAZ-M and then NAZ-L. Regarding the adsorption capacity, NAZ-S adsorbed the most chromium(VI) ions followed by NAZ-M and then NAZ-L. The binding energy of Cr(2p) at 575-577 eV was detected after adsorption, and the effects of the temperature, contact time, and pH on the adsorption of chromium(VI) ions were evaluated. We identified the following adsorption mechanism: ion exchange with sulfate ions in the interlayer region of the NAZ samples. Finally, the chromium(VI) ions adsorbed by the NAZ samples were easily desorbed using a desorption solution. The results showed that NAZ offers great potential for the removal of chromium(VI) ions from aqueous solutions.

Evaluation of Adsorption Mechanism of Chromium(VI) Ion Using Ni-Al Type and Ni-Al-Zr Type Hydroxides

To evaluate the feasibility of nickel–aluminum (the Ni2+:Al3+ molar ratios of 1.0:1.0 and 1.0:2.0 are denoted as NA11 and NA12, respectively) and nickel–aluminum–zirconium type (the Ni2+:Al3+:Zr4+ molar ratios of 0.9:1.0:0.09 and 0.9:2.0:0.09 are denoted as NAZ1 and NAZ2, respectively) hydroxides for Cr(VI) removal from aqueous media, the adsorption capability and adsorption mechanism of Cr(VI) using the above-mentioned adsorbents were investigated in this study. The quantity of Cr(VI) adsorbed onto NA11, NA12, NAZ1, and NAZ2 was 25.5, 25.6, 24.1, and 24.6 mg g−1, respectively. However, the quantity of aluminum (base metal) released from NA11 (approximately 0.14 mg g−1) was higher than that from NAZ1 (approximately 1.0 µg g−1), indicating that NAZ1 was more suitable for Cr(VI) removal than NA11. In addition, the effects of pH, contact time, and temperature on the adsorption of Cr(VI) were evaluated. Moreover, to elucidate the adsorption mechanism of Cr(VI) using NA11 and NAZ1, the elemental distribution, X-ray photoelectron spectrometry spectra, and ion exchange capability were also determined. Cr(VI) adsorbed onto the NAZ1 surface was easily desorbed using a sodium hydroxide solution under our experimental conditions. The information regarding this study can be useful for removing Cr(VI) from aqueous media.

Cr(VI) Sorption from Aqueous Solution: A Review

Hexavalent chromium (Cr(VI)) in water systems is a major hazard for living organisms, including humans. The most popular technology currently used to remove Cr(VI) from polluted water is sorption for its effectiveness, ease of use, low cost and environmental friendliness. The electrostatic interactions between chromium species and the sorbent matrix are the main determinants of Cr(VI) sorption. The pH plays a central role in the process by affecting chromium speciation and the net charge on sorbent surface. In most cases, Cr(VI) sorption is an endothermic process whose kinetics is satisfactorily described by the pseudo second-order model. A critical survey of the recent literature, however, reveals that the thermodynamic and kinetic parameters reported for Cr(VI) sorption are often incorrect and/or erroneously interpreted.

Hexavalent chromium removal from aqueous solution by adsorption on modified zeolites coated with Mg-layered double hydroxides

In this study, MgAl-LDHs and MgFe-LDHs were synthesized via co-precipitation method and in situ coated on pre-washed zeolites through dipping process in beaker. The obtained modified zeolites and original zeolites were utilized as substrates of constructed rapid infiltration systems (CRIS) to remove hexavalent chromium (Cr(VI)) in wastewater. Micro-morphology features and chemical composition of zeolites before and after modification were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray fluorescence spectrometer (XRF). The SEM, XRD, and XRF results demonstrated the feasibility of LDHs coated on the surface of the original zeolites. Purification experiments in simulated CRIS showed that the Cr(VI) removal rates of zeolites/MgAl-LDHs increased by 110.03% on average every concentration (0.5-16 mg L^-1) compared with the original zeolites under 24-h HRT. The adsorption capacity of zeolites/MgAl-LDHs reached 66.98 mg kg^-1 at 32 mg L^-1 initial Cr(VI) concentration, which is nearly twice that of the original zeolites (33.24 mg kg^-1) and 1.5 times higher than that of zeolites/MgFe-LDHs (42.01 mg kg^-1). Isothermal adsorption tests showed that the Freundlich isotherm equations gave better fitting to the adsorption process. And zeolites/MgAl-LDHs showed a best fit with pseudo-second-order model which meant that the adsorption of Cr(VI) by zeolites/MgAl-LDHs was dominated by chemisorption. Thermodynamic parameters showed that the process of adsorption for the three substrates was spontaneous and endothermic intrinsically. Zeolites/MgAl-LDHs also displayed nearly 60% desorption rate with low concentration eluent (0.01 mol L^-1 NaCl). Therefore, zeolites/MgAl-LDHs were chosen out as an optimal substrate for removing Cr(VI) from wastewater in CRIS. Graphical Abstract.

Adsorption mechanism of hexavalent chromium onto layered double hydroxides-based adsorbents: A systematic in-depth review

An attempt has been made in this review to provide some insights into the possible adsorption mechanisms of hexavalent chromium onto layered double hydroxides-based adsorbents by critically examining the past and present literature. Layered double hydroxides (LDH) nanomaterials are typical dual-electronic adsorbents because they exhibit positively charged external surfaces and abundant interlayer anions. A high positive zeta potential value indicates that LDH has a high affinity to Cr(VI) anions in solution through electrostatic attraction. The host interlayer anions (i.e., Cl^-, NO₃^-, SO₄^2-, and CO₃^2-) provide a high anion exchange capacity (53-520 meq/100 g) which is expected to have an excellent exchangeable capacity to Cr(VI) oxyanions in water. Regarding the adsorption-coupled reduction mechanism, when Cr(VI) anions make contact with the electron-donor groups in the LDH, they are partly reduced to Cr(III) cations. The reduced Cr(III) cations are then adsorbed by LDH via numerous interactions, such as isomorphic substitution and complexation. Nonetheless, the adsorption-coupled reduction mechanism is greatly dependent on: (1) the nature of divalent and trivalent salts utilized in LDH preparation, and the types of interlayer anions (i.e., guest intercalated organic anions), and (3) the adsorption experiment conditions. The low Brunauer-Emmett-Teller specific surface area of LDH (1.80-179 m²/g) suggests that pore filling played an insignificant role in Cr(VI) adsorption. The Langmuir maximum adsorption capacity of LDH (Q^o_max) toward Cr(VI) was significantly affected by the natures of used inorganic salts and synthetic methods of LDH. The Q^o_max values range from 16.3 mg/g to 726 mg/g. Almost all adsorption processes of Cr(VI) by LDH-based adsorbent occur spontaneously (ΔG° <0) and endothermically (ΔH° >0) and increase the randomness (ΔS° >0) in the system. Thus, LDH has much potential as a promising material that can effectively remove anion pollutants, especially Cr(VI) anions in industrial wastewater.

Layered Double Hydroxide Sorbents for Removal of Selenium from Power Plant Wastewaters

Selenium is an essential trace element but is increasingly becoming a contaminant of concern in the electric power industry due to the challenges of removing solubilized selenate anions, particularly in the presence of sulfate. In this work, we evaluate granulated layered double hydroxide (LDH) materials as sorbents for selenium removal from wastewaters obtained from a natural gas power plant with the aim to elucidate the effect of competing ions on the sorption capacities for selenium removal. We first present jar test data, followed by small-scale column testing in 0.43 inch (1.1 cm) and 2 inch (5.08 cm) diameter testbed columns for the treatment of as-obtained cooling tower blowdown waters and plant wastewaters. Finally, we present field results from a pilot-scale study evaluating the LDH media for treatment of cooling tower blowdown water. We find that despite the high levels of total dissolved solids and competing sulfate ions, the selenium oxoanions and other regulated metals such as chromium and arsenic are successfully removed using LDH media without needing any pre-treatment or pH adjustment of the wastewater.

Removal of Cr(vi) from aqueous solution using magnetic modified biochar derived from raw corncob

Magnetic modified-corncob biochar with an impregnation ratio of iron at 20% (w/w) was used for removal of Cr(vi) from aqueous solution.

Enhanced removal performance of Cr(VI) by the core-shell zeolites/layered double hydroxides (LDHs) synthesized from different metal compounds in constructed rapid infiltration systems

Nine kinds of LDHs were synthesized by the co-precipitation method under alkaline conditions with different combinations of trivalent metal compounds (FeCl₃, AlCl₃, CoCl₃) and divalent metal compounds (CaCl₂, MgCl₂, ZnCl₂), which were then coated in situ on the surface of zeolites to synthesize core-shell zeolites/LDHs composites. The zeolites before and after modification were characterized by SEM and X-ray fluorescence spectrometry. Using the different core-shell zeolites/LDHs and original zeolite substrates, the constructed rapid infiltration systems (CRIS) simulated test columns were set to treat the municipal sewage containing hexavalent chromium, Cr(VI). Isothermal adsorption tests were subsequently performed. The average removal efficiencies of the small-sized zeolites were much higher than those of the large-sized zeolites. For the small-sized zeolites, the Cr(VI) removal performances of the Mg-LDHs- and Al-LDHs-modified zeolite substrates were efficiently enhanced in particular, which could reach over 90%. And the removal rate of core-shell zeolites/ZnAl-LDHs reached 94.5%. Meanwhile, the maximum adsorption capacity of ZnAl-LDHs-modified zeolites could reach 51.0 mg/kg, indicating that the adsorption properties could be enhanced by ZnAl-LDHs coating. During the purification experiments, most of the LDHs-modified zeolites maintained their predominant chemical adsorption ability for the removal of Cr(VI). Therefore, the small-sized core-shell zeolites/ZnAl-LDHs composites could be used as potential substrates for the efficient removal of Cr(VI) in CRIS.