Synthesis and characterization of nanosilver-silicone hydrogel composites for inhibition of bacteria growth

Rational design of antibiotic-free antimicrobial contact lenses: Trade-offs between antimicrobial performance and biocompatibility

Microbial keratitis associated with contact lenses (CLs) wear remains a significant clinical concern. Antibiotic therapy is the current standard of care. However, the emergence of multidrug-resistant pathogens necessitates the investigation of alternative strategies. Antibiotic-free antimicrobial contact lenses (AFAMCLs) represent a promising approach in this regard. The effectiveness of CLs constructed with a variety of antibiotic-free antimicrobial strategies against microorganisms has been demonstrated. However, the impact of these antimicrobial strategies on CLs biocompatibility remains unclear. In the design and development of AFAMCLs, striking a balance between robust antimicrobial performance and optimal biocompatibility, including safety and wearing comfort, is a key issue. This review provides a comprehensive overview of recent advancements in AFAMCLs technology. The focus is on the antimicrobial efficacy and safety of various strategies employed in AFAMCLs construction. Furthermore, this review investigates the potential impact of these strategies on CLs parameters related to wearer comfort. This review aims to contribute to the continuous improvement of AFAMCLs and provide a reference for the trade-off between resistance to microorganisms and wearing comfort. In addition, it is hoped that this review can also provide a reference for the antimicrobial design of other medical devices.

Microbial growth and adhesion of Escherichia coli in elastomeric silicone foams with commonly used additives

Silicone is often used in environments where water repellency is an advantage. Contact with water promotes the adhesion of microorganisms and biofilm formation. Depending on the application, this may increase the possibility of food poisoning and infections, the material's degrading appearance, and the likelihood of manufacturing defects. The prevention of microbial adhesion and biofilm formation is also essential for silicone-based elastomeric foams, which are used in direct contact with human bodies but are often difficult to clean. In this study, the microbial attachment in and the retention from the pores of silicone foams of different compositions is described and compared to those of commonly used polyurethane foams. The growth of the gram-negative Escherichia coli in the pores and their leaching during wash cycles is characterised by bacterial growth/inhibition, adhesion assay, and SEM imaging. The structural and surface properties of the materials are compared. Despite using common antibacterial additives, we have found that non-soluble particles stay isolated in the silicone elastomer layer, thus affecting surface microroughness. Water-soluble tannic acid dissolves into the medium and seems to aid in inhibiting planktonic bacterial growth, with a clear indication of the availability of tannic acid on the surfaces of SIFs.

Experimental Investigations into the Pyrolysis Mechanism and Composition of Ceramic Precursors Containing Boron and Nitrides with Different Boron Contents

In this work, a novel ceramic precursor containing boron, silicon, and nitrides (named SiBCN) was synthesized from liquid ceramic precursors. Additionally, its pyrolysis, microstructure, and chemical composition were studied at 1600 °C. The results showed that the samples with different boron contents had similar structural composition, and both of the two precursors had stable amorphous SiBN structures at 1400 °C, which were mainly composed of B-N and Si-N and endowed them with excellent thermo-oxidative stability. With the progress of the heating process, the boron contents increased and the structures became more amorphous, significantly improving the thermal stability of the samples in high-temperature environments. However, during the moisture treatment, the introduction of more boron led to worse moisture stability.

Enhancing physico-mechanical and antibacterial properties of natural rubber using synthesized Ag-SiO2 nanoparticles

The incorporation of the prepared Ag-SiO₂ core-shell particles in natural rubber matrix was investigated on antibacterial and mechanical properties of resulting composites. Significant antibacterial effect against S. aureus (Gram positive) and P. aeruginosa (Gram negative) was observed and achieved inhibition growth up to 85 and 90%, respectively, after 24 h depending on the amount of Ag-SiO₂ core-shell. It was found that SiO₂ acted as crosslinking agent and controlling the amount of silver release. UV-vis spectra and TEM, XRD showed Ag-SiO₂ core-shell particles formation. SEM, FTIR, XRD and mechanical analysis showed uniform distribution of Ag-SiO₂ core-shell into rubber matrix with enhanced tensile strength.

Synthesis of Functional Silver Nanoparticles and Microparticles with Modifiers and Evaluation of Their Antimicrobial, Anticancer, and Antioxidant Activity

An accumulating body of evidence reports the synthesis and biomedical applications of silver nanoparticles. However, the studies regarding the use of maleic acid and citric acid in the synthesis of nano-sized silver particles (AgNPs) and micro-sized silver particles (AgMPs) as well as their antibacterial, antifungal, and anticancer activities have not been reported. In the current study, we synthesized AgNPs and AgMPs using maleic acid and citric acid as capping agents and have characterized them by UV-Vis, energy-dispersive X-Ray spectroscopy (EDS), X-Ray diffraction (XRD), and scanning electron microscope (SEM) analysis. The capped silver particles were examined for their antimicrobial activity and cytotoxicity against bacteria, fungi, and brine shrimp. Additionally, the anticancer activity of these particles was tested against human breast and liver cancer cell lines. The free radical scavenging activity of capped silver particles was evaluated by 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. SEM analysis revealed a round plate-like morphology of maleic acid capped particles with an average size of 39 ± 4 nm, whereas citric acid capped particles display flower-shaped morphology with rough surfaces and an average size of 250 ± 5 nm. The uncapped AgMPs were hexagonal with 500 ± 4 nm size. EDS and XRD analysis confirmed the presence of Ag and face-centered cubic crystalline nature, respectively. Functionally, capped silver particles exhibited antibacterial activity against Gram-positive (Staphylococcus aureus, Bacillus subtilis, and Micrococcus luteus) and Gram-negative bacteria (Salmonella setubal, Enterobacter aerogenes, and Agrobacterium tumefaciens). The bactericidal activity was more active against Gram-negative bacteria with minimum inhibitory concentration (MIC) as low as 5 ppm as compared to 25 ppm for Gram-positive. Similarly, the silver particles demonstrated antifungal activity by inhibiting the growth of five fungal strains (Mucor species, Aspergillus niger, Aspergillus flavus, Aspergillus fumigatus, and Fusarium solani) up to 50% at the concentration of 500 ppm. Additionally, these particles showed substantial toxicity against brine shrimp and also significantly inhibited the proliferation of breast cancer (MCF7) and liver cancer (HePG2) cell lines (IC₅₀ 8.9-18.56 µM). Uncapped AgMPs were less effective, inhibiting only the proliferation of MCF7 cells with IC₅₀ 46.54 µM. Besides cytotoxicity, these particles acted as potential antioxidants, showing free radical scavenging up to 74.4% in a concentration-dependent manner. Taken together, our results showed that the modifiers affect the shape and size of silver particles and may, in part, contribute to the antimicrobial and antioxidant activity of silver particles. However, the contribution of maleic acid and citric acid in enhancing the antimicrobial, anticancer, and antioxidant potential independent of silver nano and microparticles needs to be studied further. In vivo experiments may determine the therapeutic effectiveness of silver particles capped with these modifiers.

Synthesis and characterization of a silver nanoparticle-containing polymer composite with antimicrobial abilities for application in prosthetic and orthotic devices

Background

The presence of skin problems in patients using external lower limb prosthesis is recurrent. This has generated the need to develop interfaces for prosthesis with the ability to control microbial growth. Silver nanoparticles (AgNPs) have been implemented in the development of biomaterials because of their high antimicrobial activity. This article discusses the development of an AgNP-containing polymer composite with antimicrobial activity for developing prosthetic liners.

Methods

AgNPs were synthesized using a photochemical method and certain physicochemical properties were characterized. Furthermore, the antimicrobial activity of AgNPs against Staphylococcus aureus ATCC 25923 and methicillin-resistant Staphylococcus aureus (MRSA), was assessed on the basis of their minimum inhibitory concentrations (MICs). AgNPs were incorporated into a silicon elastomer to assess certain physicomechanical properties, antimicrobial activity and cytotoxic effect of the material.

Results

The maximum antimicrobial activity of the material against Staphylococcus aureus ATCC 25923 and MRSA was 41.58% ±2.97% at AgNP concentration of 32.98 μg/mL and 14.85% ±5.94% at AgNP concentration of 16.49 μg/mL, respectively. Additionally, the material exhibited tensile yield strength, rupture tensile strength, and tensile modulus of elasticity of 0.70 - 1.10 MPa, 0.71–1.06 MPa, and 0.20 - 0.30 MPa, respectively. The mechanical characteristics of the material were within the acceptable range for use in external lower limb prosthetic and orthotic interfaces.

Conclusions

It was possible to incorporate the AgNPs in a silicone elastomer, finding that the composite developed presented antimicrobial activity against Staphylococcus aureus ATCC 25923 and MRSA when compared to non-AgNP material samples.

pHEMA@AGMNA-1: A novel material for the development of antibacterial contact lens

The Metal Organic Framework (MOF) of formula {[Ag₆(μ₃-HMNA)₄(μ₃-MNA)₂]^2-·[(Et₃NH)⁺]₂·(DMSO)₂·(H₂O)} (AGMNA), a known efficient antimicrobial compound which contains the anti-metabolite, 2-thio-nicotinic acid (H₂MNA), was incorporated in polymer hydrogels using, hydroxyethyl-methacrylate (HEMA). The material pHEMA@AGMNA-1 was characterized by X-ray fluorescence (XRF) spectroscopy, X-ray powder diffraction analysis (XRPD), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDX), Thermogravimetric Differential Thermal Analysis (TG-DTA), Differential Scanning Calorimetry (DTG/DSC), attenuated total reflection spectroscopy (FT-IR-ATR) and Ultrasonic Imaging. The antimicrobial capacity of pHEMA@AGMNA-1 was evaluated against the Gram negative bacterial strain Pseudomonas aeruginosa and the Gram positive ones of the genus of Staphylococcus epidermidis and Staphylococcus aureus, which are the etiology of the microbial keratitis. The % bacterial viability of P. aeruginosa, S. epidermidis and S. aureus upon their incubation with pHEMA@AGMNA-1 discs is significantly low (0.4 ± 0.1%, 1.5 ± 0.4% and 7.7 ± 0.5% respectively). The inhibition zones (IZ) caused by pHEMA@AGMNA-1 discs against P. aeruginosa, S. epidermidis and S. aureus are 14.0 ± 1.1, 11.3 ± 1.3 and 11.8 ± 1.8 mm respectively. Furthermore, pHEMA@AGMNA-1 exhibits low toxicity. Thus, pHEMA@AGMNA-1 might be an efficient candidate for the development of antimicrobial active contact lenses.

Contact lenses as drug-delivery systems: a promising therapeutic tool

The ocular administration of drugs using traditional pharmaceutical forms, including eye drops or ointments, results in low bioavailability, as well as requiring multiple administrations per day, with the consequent danger of therapeutic non-compliance. Although, through the use of pharmaceutical technology, attempts have been made to use various solutions in order to increase bioavailability in the most common pharmaceutical forms, it has not been entirely satisfactory. In this context, contact lenses are presented as drug delivery systems that largely remedy these two major problems and offer other additional advantages. Therefore, the use of contact lenses as drug carrying systems has been increasingly investigated in recent years, as they can increase the bioavailability of these drugs, leading to an increase in therapeutic efficacy and compliance. The main techniques used to achieve this goal are included in this review, including immersion in drug solutions, use of vitamin E barriers, molecular printing, colloidal systems, etc. The most interesting results, depending on the different eye pathologies, are presented. Although the use of contact lenses as a vehicle for the release of active ingredients is a relatively novel strategy, there are already many studies and trials that support it. In any case, further research needs to be carried out to finally reach an effective, safe, and stable product that can be marketed.

Antimicrobial and physicomechanical natures of silver nanoparticles incorporated into silicone-hydrogel films

PURPOSE

The effects of silver nanoparticles (AgNPs) incorporated in silicone-hydrogel films on their physicochemical properties and microbial activity were investigated.

METHODS

Silicone-hydrogel composite films (SiHCFs) were prepared by in-situ chemical reduction of silver ions added in different concentrations (0, 10, 20, 30, 40, 60, and 80 ppm) followed by ultraviolet (UV) casting. The reduction of silver ions into AgNPs was confirmed by transmission electron microscopy (TEM) and absorption spectroscopy over ultraviolet and visible (UV-vis) wavelengths. Incorporation of AgNPs into SiHCFs was confirmed by UV-vis absorption spectroscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopic mapping. The physico- mechanical properties of the SiHCFs were evaluated. Antimicrobial activity and biofilm formation of Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus were assessed.

RESULTS

TEM, UV-vis absorption, SEM, and EDX mapping showed that silver ions were reduced in the mixture of co-polymerizing monomers and incorporation of AgNPs into SiHCFs was achieved. Mechanical properties of the SiHCFs were enhanced with increasing AgNPs concentration without affecting their chemical and thermal properties. SiHCFs exhibited transmittance greater than 90% at a wavelength 600 nm. Bacterial growths in the solutions bathing the SiHCFs with increasing silver concentration were 95, 78, 4, 2, 0, 0, 0% respectively, for Escherichia coli; 95, 82, 4, 0.6, 0, 0, 0% for Pseudomonas aeruginosa; and 93, 79, 4, 0.5, 0, 0, 0% for Staphylococcus aureus.

CONCLUSIONS

Incorporation of AgNPs into SiHCFs demonstrated sufficient release of AgNPs to inhibit bacterial growth and reduce biofilm formation, with collateral enhancement of some mechanical properties of SiHCFs.

A comprehensive review on contact lens for ophthalmic drug delivery

With the prevalence of electronic devices and an aging population, the number of people affected with eye disease is increasing year by year. In spite of a large number of eye drops on the market, most of them do not perform sufficiently, due to rapid clearance mechanisms and ocular barriers. To enhance drug delivery to the eye, a number of novel formulations for ocular diseases have been investigated over recent decades, aiming to increase drug retention and permeation while also allowing for sustained drug release over prolonged periods. The contact lens, initially used to correct visual acuity and beautify female eyes, is one such novel formulation with outstanding potential. Recently, contact lenses have been extensively used for ocular drug delivery to enhance ocular bioavailability and reduce side effects, and are particularly suitable for the treatment of chronic diseases, and thus are of interest to ophthalmic scientists. This review summarizes contact lens classification, methods of preparation, strategies for integrating drugs into lenses, in vitro and in vivo studies, and clinical applications. This review also discusses the current state of ocular drug therapy and provides an outlook for future therapeutic opportunities in the field of ocular drug delivery.

Optimization of silver nanoparticles biosynthesis mediated by Aspergillus niger NRC1731 through application of statistical methods: enhancement and characterization

The fungal-mediated silver nanoparticles (AgNPs) biosynthesis optimization via the application of central composite design (CCD) response surface to develop an effective ecofriendly and inexpensive green process was the aim of the current study. Nanosilver biosynthesis using the Aspergillus niger NRC1731 cell-free filtrate (CFF) was studied through involving the most parameters affecting the AgNPs green synthesis and its interactions effects. The statistical optimization models showed that using 59.37% of CFF in reaction containing 1.82 mM silver nitrate for 34 h at pH 7.0 is the optimum value to optimize the AgNPs biosynthesis. The obtained AgNPs were characterized by means of electron microscopy, UV/visible spectrophotometry, energy dispersive X-ray analysis and infrared spectroscopy to elucidate its almost spherical shape with diameter of 3-20 nm. The produced AgNPs exhibited a considerable antimicrobial activity against Bacillus mycoides, Escherichia coli in addition to Candida albicans.

Recent Advances in Antimicrobial Hydrogels Containing Metal Ions and Metals/Metal Oxide Nanoparticles

Recently, the rapid emergence of antibiotic-resistant pathogens has caused a serious health problem. Scientists respond to the threat by developing new antimicrobial materials to prevent or control infections caused by these pathogens. Polymer-based nanocomposite hydrogels are versatile materials as an alternative to conventional antimicrobial agents. Cross-linking of polymeric materials by metal ions or the combination of polymeric hydrogels with nanoparticles (metals and metal oxide) is a simple and effective approach for obtaining a multicomponent system with diverse functionalities. Several metals and metal oxides such as silver (Ag), gold (Au), zinc oxide (ZnO), copper oxide (CuO), titanium dioxide (TiO₂) and magnesium oxide (MgO) have been loaded into hydrogels for antimicrobial applications. The incorporation of metals and metal oxide nanoparticles into hydrogels not only enhances the antimicrobial activity of hydrogels, but also improve their mechanical characteristics. Herein, we summarize recent advances in hydrogels containing metal ions, metals and metal oxide nanoparticles with potential antimicrobial properties.

Application of response surface methodology to optimize the extracellular fungal mediated nanosilver green synthesis

This study aims to optimize the biosynthesis of nanosilver particles mediated by Trichoderma viride ATCC36838 using response surface methodology (RSM). Silver nanoparticles (AgNPs) were biosynthesized effectively in terms of the factors impacting silver ion (Ag⁺) reduction to metallic nanosilver (Ag⁰) using culture filtrate under shaking condition. The results of statistics calculations revealed that 2 mM silver nitrate and 28% (v/v) of culture filtrate at pH 7.0 for 34 h were the optimum values for AgNPs biosynthesis. The characterization of the produced AgNPs was conducted using electron microscopy, energy dispersive X-ray analysis, UV/visible spectrophotometry, and Fourier transform infrared spectroscopy. Round to oval AgNPs were detected with aspects of TEM within diameter range of 4-16 nm. The results of this study could help in developing a reliable ecofriendly, simple, and low cost process for microbial assisted AgNPs green synthesis especially with the continuous increase in its application fields.