In silico investigation of vertebroplasty as a stand-alone treatment for vertebral burst fractures

Biomechanical comparison between unilateral and bilateral percutaneous vertebroplasty for osteoporotic vertebral compression fractures: A finite element analysis

Background and objective: The osteoporotic vertebral compression fracture (OVCF) has an incidence of 7.8/1000 person-years at 55–65 years. At 75 years or older, the incidence increases to 19.6/1000 person-years in females and 5.2–9.3/1000 person-years in males. To solve this problem, percutaneous vertebroplasty (PVP) was developed in recent years and has been widely used in clinical practice to treat OVCF. Are the clinical effects of unilateral percutaneous vertebroplasty (UPVP) and bilateral percutaneous vertebroplasty (BPVP) the same? The purpose of this study was to compare biomechanical differences between UPVP and BPVP using finite element analysis.

Materials and methods: The heterogeneous assignment finite element (FE) model of T11-L1 was constructed and validated. A compression fracture of the vertebral body was performed at T12. UPVP and BPVP were simulated by the difference in the distribution of bone cement in T12. Stress distributions and maximum von Mises stresses of vertebrae and intervertebral discs were compared. The rate of change of maximum displacement between UPVP and BPVP was evaluated.

Results: There were no obvious high-stress concentration regions on the anterior and middle columns of the T12 vertebral body in BPVP. Compared with UPVP, the maximum stress on T11 in BPVP was lower under left/right lateral bending, and the maximum stress on L1 was lower under all loading conditions. For the T12-L1 intervertebral disc, the maximum stress of BPVP was less than that of UPVP. The maximum displacement of T12 after BPVP was less than that after UPVP under the six loading conditions.

Conclusion: BPVP could balance the stress of the vertebral body, reduce the maximum stress of the intervertebral disc, and offer advantages in terms of stability compared with UPVP. In summary, BPVP could reduce the incidence of postoperative complications and provide promising clinical effects for patients.

Modified percutaneous Kyphoplasty technique in the treatment of osteoporotic thoracolumbar burst fractures: could it reduce the odds of cement leakage?

Background

Osteoporotic thoracolumbar burst fracture (OTLBF) is common in seniors. Due to the fracture of the posterior vertebra and spinal canal occupancy, the risk of cement leakage and spine injury is high in OTLBF patients, thus the application of vertebroplasty and kyphoplasty is limited in these patients. This study aims to investigate the efficacy and safety of the modified percutaneous kyphoplasty (MPKP) in the treatment of OTLBF.

Methods

Clinical data of the OTLBF patients treated with MPKP and the osteoporotic thoracolumbar compression fracture (OTLCF) patients undergone PKP from January 2014 to June 2016 were collected. The key procedure of the MPKP was to fill the bone cavity with gel-foam by the first balloon inflation and to press the gel-foam by a second balloon inflation. Pain intensity, Oswestry disability index (ODI), and bone cement leakage of the patients in the two groups were analyzed.

Results

In the burst fracture group, the overall spinal canal occupancy was relatively low, and the maximum occupancy was 1/3 of the sagittal diameter of the spinal canal. The surgical duration was longer in the burst fracture group (39.0 ± 5.0 min with 95% CI: 37.7, 40.3) than in the compression fracture group (31.7 ± 4.3 min with 95% CI: 31.1, 32.3), and the difference between the two groups was statistically significant (Z = -8.668 and P = 0.000). Both the Oswestry disability index (ODI) and the visual analog scales (VAS) were apparently improved, but there was no significant difference between the two groups. Cement leakage occurred in 13 out of the 53 cases (24.5%) in the burst fracture group and 35 out of the 193 cases (18.1%) in the compression fracture group, and there was no significant difference between the two groups (Z = − 1.038 and P = 0.299). Neither group had consequential symptoms, such as spinal cord lesion, pain, and numbness of the peripheral nerve.

Conclusion

Similar to the efficacy of PKP in the treatment of OTLCF, MPKP efficiently reduced the cement leakage rate and improved the safety of the surgery, although it prolonged the surgical duration and introduced more surgical steps.

Effect of the In Vitro Boundary Conditions on the Surface Strain Experienced by the Vertebral Body in the Elastic Regime

The vertebral strength and strain can be assessed in vitro by both using isolated vertebrae and sets of three adjacent vertebrae (the central one is loaded through the disks). Our goal was to elucidate if testing single-vertebra-specimens in the elastic regime provides different surface strains to three-vertebrae-segments. Twelve three-vertebrae sets were extracted from thoracolumbar human spines. To measure the principal strains, the central vertebra of each segment was prepared with eight strain-gauges. The sets were tested mechanically, allowing comparison of the surface strains between the two boundary conditions: first when the same vertebra was loaded through the disks (three-vertebrae-segment) and then with the endplates embedded in cement (single-vertebra). They were all subjected to four nondestructive tests (compression, traction, torsion clockwise, and counterclockwise). The magnitude of principal strains differed significantly between the two boundary conditions. For axial loading, the largest principal strains (along vertebral axis) were significantly higher when the same vertebra was tested isolated compared to the three-vertebrae-segment. Conversely, circumferential strains decreased significantly in the single vertebrae compared to the three-vertebrae-segment, with some variations exceeding 100% of the strain magnitude, including changes from tension to compression. For torsion, the differences between boundary conditions were smaller. This study shows that, in the elastic regime, when the vertebra is loaded through a cement pot, the surface strains differ from when it is loaded through the disks. Therefore, when single vertebrae are tested, surface strain should be taken with caution.