Risk assessment of resurfacing implant loosening and femur fracture under low-energy impacts taking into account degenerative changes in bone tissues. Computer simulation

Effect of patient-specific factors on regeneration in lumbar spine at healthy disc and total disc replacement. Computer simulation

BACKGROUND AND OBJECTIVE

Degenerative diseases of the spine have a negative impact on the quality of life of patients. This study presents the results of numerical modelling of the mechanical behaviour of the lumbar spine with patient-specific conditions at physiological loads. This paper aims to numerically study the influence of degenerative changes in the spine and the presence of an endoprosthesis on the creation of conditions for tissue regeneration.

METHODS

A numerical model of the mechanical behaviour of lumbar spine at healthy and after total disc replacement under low-energy impacts equivalent to physiological loads is presented. The model is based on the movable cellular automaton method (discrete elements), where the mechanical behaviour of bone tissue is described using the Biot poroelasticity accounting for the presence and transfer of interstitial biological fluid. The nutritional pathways of the intervertebral disc in cases of healthy and osteoporotic bone tissues were predicted based on the analysis of the simulation results according to the mechanobiological principles.

RESULTS

Simulation of total disc replacement showed that osseointegration of the artificial disc plates occurs only in healthy bone tissue. With total disc replacement in a patient with osteoporosis, there is an area of increased risk of bone resorption in the near-contact area, approximately 1 mm wide, around the fixators. Dynamic loads may improve the osseointegration of the implant in pathological conditions of the bone tissue.

CONCLUSIONS

The results obtained in the case of healthy spine and osteoporotic bone tissues correspond to the experimental data on biomechanics and possible methods of IVD regeneration from the position of mechanobiological principles. The results obtained with an artificial disc (with keel-type fixation) showed that the use of this type of endoprosthesis in healthy bone tissues allows to reproduce the function of the natural intervertebral disc and does not contribute to the development of neoplastic processes. In the case of an artificial disc with osteoporosis of bone tissues, there is a zone with increased risk of tissue resorption and development of neoplastic processes in the area near the contact of the implant attachment. This circumstance can be compensated by increasing the loading level.

CT-FEM of the human thorax: Frequency response function and 3D harmonic analysis at resonance

BACKGROUND AND OBJECTIVE

High-frequency chest wall compression (HFCC) therapy by airway clearance devices (ACDs) acts on the rheological properties of bronchial mucus to assist in clearing pulmonary secretions. Investigating low-frequency vibrations on the human thorax through numerical simulations is critical to ensure consistency and repeatability of studies by reducing extreme variability in body measurements across individuals. This study aims to present the numerical investigation of the harmonic acoustic excitation of ACDs on the human chest as a gentle and effective HFCC therapy.

METHODS

Four software programs were sequentially used to visualize medical images, decrease the number of surfaces, generate and repair meshes, and conduct numerical analysis, respectively. The developed methodology supplied the validation of the effect of HFCC through computed tomography-based finite element analysis (CT-FEM) of a human thorax. To illustrate the vibroacoustic characteristics of the HFCC therapy device, a 146-decibel sound pressure level (dBSPL) was applied on the back-chest surface of the model. Frequency response function (FRF) across 5-100 Hz was analyzed to characterize the behaviour of the human thorax with the state-space model.

RESULTS

We discovered that FRF pertaining to accelerance equals 0.138 m/s2N at the peak frequency of 28 Hz, which is consistent with two independent experimental airway clearance studies reported in the literature. The state-space model assessed two apparent resonance frequencies at 28 Hz and 41 Hz for the human thorax. The total displacement, kinetic energy density, and elastic strain energy density were furthermore quantified at 1 µm, 5.2 µJ/m3, and 140.7 µJ/m3, respectively, at the resonance frequency. In order to deepen our understanding of the impact on internal organs, the model underwent simulations in both the time domain and frequency domain for a comprehensive analysis.

CONCLUSION

Overall, the present study enabled determining and validating FRF of the human thorax to roll out the inconsistencies, contributing to the health of individuals with investigating gentle but effective HFCC therapy conditions with ACDs. This innovative finding furthermore provides greater clarity and a tangible understanding of the subject by simulating the responses of CT-FEM of the human thorax and internal organs at resonance.

Towards the simulation of bone-implant systems with a stratified material model

BACKGROUND

The clinical performance of medical devices is becoming increasingly important for the requirements of modern development processes and the associated regulations. However, the evidence for this performance can often only be obtained very late in the development process via clinical trials or studies.

OBJECTIVE

The purpose of the presented work is to show that the simulation of bone-implant-system has advanced in various aspects, including cloud-based execution, Virtual Clinical Trials and material modeling towards a point where and widespread utilization in healthcare for procedure planning and enhancing practices seems feasible. But this will only hold true if the virtual cohort data build from clinical Computer Tomography data are collected and analysed with care.

METHODS

An overview of the principal steps necessary to perfor Finite Element Method-based structural mechanical simulations of bone-implant systems based on clinical imaging data is presented. Since these data form the baseline for virtual cohort construction, we present an enhancement method to make them more accurate and reliable.

RESULTS

The findings of our work comprise the initial step towards a virtual cohort for the evaluation of proximal femur implants. In addition, results of our proposed enhancement methodology for clinical Computer Tomography data that demonstrate the necessity for the usage of multiple image reconstructions are presented.

CONCLUSION

Simulation methodologies and pipelines nowadays are mature and have turnaround times that allow for a day-to-day use. However, small changes in the imaging and the pre-processing of data can have a significant impact on the obtaind results. Consequently, first steps towards virtual clinical trials, like collecting bone samples, are done, but the reliability of the input data remains subject to further research and development.

Development of a Computational Model of the Mechanical Behavior of the L4-L5 Lumbar Spine: Application to Disc Degeneration

Degenerative changes in the lumbar spine significantly reduce the quality of life of people. In order to fully understand the biomechanics of the affected spine, it is crucial to consider the biomechanical alterations caused by degeneration of the intervertebral disc (IVD). Therefore, this study is aimed at the development of a discrete element model of the mechanical behavior of the L4-L5 spinal motion segment, which covers all the degeneration grades from healthy IVD to its severe degeneration, and numerical study of the influence of the IVD degeneration on stress state and biomechanics of the spine. In order to analyze the effects of IVD degeneration on spine biomechanics, we simulated physiological loading conditions using compressive forces. The results of modeling showed that at the initial stages of degenerative changes, an increase in the amplitude and area of maximum compressive stresses in the disc is observed. At the late stages of disc degradation, a decrease in the value of intradiscal pressure and a shift in the maximum compressive stresses in the dorsal direction is observed. Such an influence of the degradation of the geometric and mechanical parameters of the tissues of the disc leads to the effect of bulging, which in turn leads to the formation of an intervertebral hernia.

Numerical Modeling of Shockwave Treatment of Knee Joint

Arthritis is a degenerative disease that primarily affects the cartilage and meniscus of the knee joint. External acoustic stimulation is used to treat this disease. This article presents a numerical model of the knee joint aimed at the computer-aided study of the regenerative effects of shockwave treatment. The presented model was verified and validated. A numerical analysis of the conditions for the regeneration of the tissues of the knee joint under shockwave action was conducted. The results allow us to conclude that to obtain the conditions required for the regeneration of cartilage tissues and meniscus (compressive stresses above the threshold value of 0.15 MPa to start the process of chondrogenesis; distortional strains above the threshold value of 0.05% characterized by the beginning of the differentiation of the tissues in large volumes; fluid pressure corresponding to the optimal level of 68 kPa to transfer tissue cells in large volumes), the energy flux density of therapeutic shockwave loading should exceed 0.3 mJ/mm².