A comprehensive finite-element human ear model to estimate noise-induced hearing loss associated with occupational noise exposure

Experimental and finite element analysis of the generation mechanism of high impulse noise overpressure (caused by a recoilless weapon) at the bottom of the ear

The intense impulse noise may damage the soldiers' hearing organs during a weapon's firing. It is essential to find out the generation mechanism of the overpressure at the bottom of the ear. The experiments of measuring the overpressure at the bottom of the ear were conducted through a rotating human head model at a recoilless weapon firing platform. The results showed that the overpressure peak at the bottom of the ear decreases with the increasing incident angle. A simulation of the test condition was developed based on the plane shock wave method. The finite element model was verified reasonably compared to the test results. The Friedlander wave propagating to the ear canal was implemented at different incident angles. The generation of the overpressure at the bottom of the ear was analyzed. According to the pressure nephograms, the impulse noise stagnated at the bottom of the ear, so the overpressure was the total pressure of impulse noise. Two parts of impulse noise entered the canal successively due to the influence of the pinna. The overpressure and Mach number at the entrance of the ear canal both decreased with increasing incident angles, resulting in impulse noise superimposed at the bottom of the ear. Investigating the generation of overpressure at the bottom of the ear under varying incident angles may have important reference value for analyzing and preventing auditory organ damage caused by impulse noise.

3D Finite Element Model of Human Ear with 3-Chamber Spiral Cochlea for Blast Wave Transmission from the Ear Canal to Cochlea

Blast-induced auditory trauma is a common injury in military service members and veterans that leads to hearing loss. While the inner ear response to blast exposure is difficult to characterize experimentally, computational models have advanced to predict blast wave transmission from the ear canal to the cochlea; however, published models have either straight or spiral cochlea with fluid-filled two chambers. In this paper, we report the recently developed 3D finite element (FE) model of the human ear mimicking the anatomical structure of the 3-chambered cochlea. The model consists of the ear canal, middle ear, and two and a half turns of the cochlea with three chambers separated by the Reissner's membrane (RM) and the basilar membrane (BM). The blast overpressure measured from human temporal bone experiments was applied at the ear canal entrance and the Fluent/Mechanical coupled fluid-structure interaction analysis was conducted in ANSYS software. The FE model-derived results include the pressure in the canal near the tympanic membrane (TM) and the intracochlear pressure at scala vestibuli, the TM displacement, and the stapes footplate (SFP) displacement, which were compared with experimentally measured data in human temporal bones. The validated model was used to predict the biomechanical response of the ear to blast overpressure: distributions of the maximum strain and stress within the TM, the BM displacement variation from the base to apex, and the energy flux or total energy entering the cochlea. The comparison of intracochlear pressure and BM displacement with those from the FE model of 2-chambered cochlea indicated that the 3-chamber cochlea model with the RM and scala media chamber improved our understanding of cochlea mechanics. This most comprehensive FE model of the human ear has shown its capability to predict the middle ear and cochlea responses to blast overpressure which will advance our understanding of auditory blast injury.

Finite element analysis of conductive hearing loss caused by fixation and detachment of ligament and tendon in the middle ear

BACKGROUND AND OBJECTIVE

The fixation of ligament and tendon of the middle ear often occurs after chronic otitis media surgery. However, there are relatively few studies on the effect of ligament and tendon on sound transmission in the human middle ear. Here, the finite element model and lumped parameter model are used to study the effect of ligament and tendon fixation and detachment on sound transmission in human ear.

METHODS

In this paper, the finite element model including the external auditory canal, middle ear and simplified inner ear is used to calculate and compare the middle ear frequency response of the normal and tympanosclerosis under pure tone stimulation. In addition, the lumped parametric model is taken into account to illustrate the effect of ligament and tendon stiffness on the human ear transmission system.

RESULTS

The results indicate that the motion of the tympanic membrane and stapes is reduced by ligament and tendon fixation. Although ligament and tendon detachment have a limited effect in the piston-motion direction, the stability of motion in the plane perpendicular to the piston-motion direction is significantly reduced. Most significantly, the ligament and tendon fixation cause a hearing effect of about 18 dB, which is greater in the plane perpendicular to the piston-motion direction after ligament and tendon detachment than in the piston-motion direction.

CONCLUSIONS

In this study, the calculation accuracy of the lumped parameter and the finite element model is studied, and the effect of ligament and tendon on hearing loss is further explored through the finite element model with high calculation accuracy, which is helpful to understand the role of ligament and tendon in the sound transmission mechanism of the human middle ear. The study of ligament and tendon on conductive hearing loss provides a reference for clinical treatment of tympanosclerosis.