Facts and alternative facts in chemical kinetics: remarks about the kinetic use of activities, termolecular processes, and linearization techniques

Colloidal metal nanocatalysts to advance orange II hydrogenolysis tracked by a microplate reader

The thermal reduction method was applied to synthesize metal nanoparticles using poly(1-vinyl-2-pyrrolidone) as an organic stabilizer to control metal nanoparticle agglomeration. Colloidal metal nanoparticles, gold, palladium, and gold–palladium nanoparticles were synthesized, and UV–visible spectrophotometry and high-resolution transmission electron microscopy analyses were conducted to characterize them. The metal nanoparticle micrographs showed well-dispersed particles with an average size of 9.6 nm (Au), 15.4 nm (Pd), and 10.6 nm (AuPd). All the colloidal metal nanoparticles served as nanocatalysts to advance a reductive degradation of orange II in presence of borohydride ions. For a prompt screening of catalytic activity, the microplate reader system was considered at a fixed maximum absorbance wavelength of λ 489 nm respected by orange II. Excess borohydride ions were used to construct pseudo-first kinetic conditions. The Langmuir–Hinshelwood model allowed the finding of kinetic activity on the surface of metal nanoparticles. AuPd nanocatalyst interface exhibited low activation energy (5.38 kJ mol−1) compared to the one on Au (8.19 kJ mol−1) and Pd (7.23 kJ mol−1).

Graphical Abstract

Studies on Synthesis, Characterization, and Photocatalytic Activity of TiO2 and Cr-Doped TiO2 for the Degradation of p-Chlorophenol

TiO₂ and Cr-TiO₂ nanoparticles (NPs) have been synthesized by the sol-gel method using titanium isopropoxide as the precursor of Titania. The prepared samples were analyzed by employing scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infrared analyses. Under UV irradiation, the photocatalytic activities of TiO₂ and Cr-TiO₂ were observed by estimating the % degradation of p-chlorophenol (PCP) as a sample pollutant. The extent of degradation was investigated, varying the catalyst dosage, initial PCP concentration, irradiation time, and solution pH. The experimental results show that efficiency of catalysts initially increases but decreases later on, whereas the % degradation of PCP is the highest at its lowest initial concentration. For TiO₂ and Cr-TiO₂ NPs at their optimal catalyst dosage of 2.0 g/L, acidic pH, and with UV irradiation for 90 min, the observed % degradation of PCP is 50.23 ± 3.12 and 66.51 ± 2.14%, respectively. Thus, the prepared Cr-TiO₂ NPs have enhanced the degradation efficiency of PCP with an irradiation time which is four time less than those reported earlier. From the kinetics analysis, the degradation reaction of PCP is found to follow a pseudo-first-order model and the rate constants are 0.0075 and 0.0122 min^-1 for pure TiO₂ and Cr-TiO₂ NPs, respectively. The present study has further revealed that owing to the lower rate of electron-hole pair recombination, the photocatalytic activity of Cr-TiO₂ NPs becomes higher than that of TiO₂. Therefore, as viable photocatalytic agents, Cr-TiO₂ NPs are suggested to be used also for efficient degradation of other organic pollutants.

Copper(I) activation of C-X bonds: bimolecular vs. unimolecular reaction mechanism

Experimental kinetic studies and DFT calculations show that the oxidative addition of aryl halides (Ar-X) to complexes [Cu(NHC)R] follow different paths depending on the nature of X. For X = Br a concerted addition leads to cis-[Cu(NHC)XRAr] from which the usual C-C coupled product Ar-R eliminates. However, for X = I trans-[Cu(NHC)IRAr] is formed instead, leading to the elimination of R-I in a metathesis reaction. This behaviour is accounted for by a change in the reaction mechanism for Ar-I, which involves two molecules of copper(I) complex, the second one stabilising the incipient iodide formed in the C-I breaking (oxidative addition) and C-I forming (reductive elimination) processes.

Ex Situ Method for Photoreduction of the Cadmium Ion from Terbium-Loaded Bismuth Vanadium Oxide

The photoreduction of Cd (II) to Cd (0) was performed using Bi4V2O11, which was tremendously enhanced by Tb3+-doped Bi4V2O11. The relationship between charge carrier isolation and light harvesting was studied in depth in this research, and a promising technique for fabricating effective photocatalysts for heavy metals was discovered. Lattice disorder effects due to size variance between V5+ and Tb3+ cations in Bi4V2O11 nanomaterials substituted with an invariable Tb3+ cation at different concentrations (x = 15, 20, and 25%). Bi4V2O11 and 15% Tb/Bi4V2O11 evidenced a coexistence of monoclinic (α-phase) with a CS/m symmetry, while 25% Tb/Bi4V2O11 was tetragonal (γ-phase) with an I4/mmm symmetry. Raman scattering experiments elucidated the changes in Bi4V2O11 lattice corresponding to oxygen motion, suggesting significant destabilization of the VO4 tetrahedra after addition of Tb3+. The SEM micrograph depicted a disparity in the microstructure with reduced grain size in 25% Tb/Bi4V2O11 samples. However, the TEM micrographs of 25% Tb/Bi4V2O11 nanomaterials revealed that crystallite sizes of 25-35 nm were obtained, presenting a single tetragonal phase, highly homogeneous in nature. Impedance spectroscopy was used to study the conductivity of these compounds in the temperature range of 300 °C. At 300 °C, the compounds with x = 25% showed a conductivity of 15.92 S cm-1. The conductivity values were found to be comparable with the highest values reported in the literature for similar compounds.