Intensified sulfate radical oxidation using cavitation applied for wastewater treatment

A novel method for the remediation of wastewater containing acid red 131 dye using acoustic cavitation combined with sulphur-doped TiO2 and oxidants

The present study investigated the degradation of Acid Red 131 (AR131) dye using a combination of ultrasound-induced cavitation, ultraviolet (UV) irradiation, chemical oxidants, and photocatalyst, focusing on the effect of operating parameters. It was established that acidic pH, higher input power, and lower initial concentration resulted in higher degradation. Sulphur-doped titanium dioxide (S-TiO2) synthesized using a novel ultrasound-assisted method showed an optimum dosage of 300 ppm for the AR131 degradation with sulphur to titanium ratio of 2:1. In the combination approach, the optimum dosage of hydrogen peroxide (H2O2) and potassium persulfate (KPS) was established as 100 ppm and 400 ppm respectively. The maximum degradation of 90.3% was obtained using a combined approach of US + KPS + UV/S-TiO2 whereas, a maximum synergetic coefficient of 1.57 was obtained for the approach of US + UV/S-TiO2 with degradation of 86.96%. It was also elucidated that for combination approaches of US + H2O2, US + H2O2 + KPS, and US + H2O2 + KPS + UV/S-TiO2, the synergetic coefficients were lower than one due to undesirable side reactions and radical scavenging. Scale-up studies performed at 15 times of the laboratory scale volume, elucidated that the maximum degradation was obtained as 58.01% for the approach of US + KPS + UV/S-TiO2. Therefore, the approach of US + KPS + UV/S-TiO2 was elucidated as the most efficient in degrading the AR131 dye at both small and large scale of operation. In terms of synergy, the approach of US + UV/S-TiO2 was more efficient. Overall, an optimized combination approach was successfully demonstrated for the effective degradation of AR131 dye with synergism and better results at a large scale.

Sulfate radicals-based advanced oxidation processes for the degradation of pharmaceuticals and personal care products: A review on relevant activation mechanisms, performance, and perspectives

Owing to the rapid development of modern industry, a greater number of organic pollutants are discharged into the water matrices. In recent decades, research efforts have focused on developing more effective technologies for the remediation of water containing pharmaceuticals and personal care products (PPCPs). Recently, sulfate radicals-based advanced oxidation processes (SR-AOPs) have been extensively used due to their high oxidizing potential, and effectiveness compared with other AOPs in PPCPs remediation. The present review provides a comprehensive assessment of the different methods such as heat, ultraviolet (UV) light, photo-generated electrons, ultrasound (US), electrochemical, carbon nanomaterials, homogeneous, and heterogeneous catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS). In addition, possible activation mechanisms from the point of radical and non-radical pathways are discussed. Then, biodegradability enhancement and toxicity reduction are highlighted. Comparison with other AOPs and treatment of PPCPs by the integrated process are evaluated as well. Lastly, conclusions and future perspectives on this research topic are elaborated.