Functionalization of mesostructured inorganic–organic and porous inorganic materials

Poultry eggshell-derived antimicrobial materials: Current status and future perspectives

Poultry eggs, the basic foodstuffs of human society, have been extensively consumed for domestic and industrial uses. A large amount of eggshell waste is generated and discarded every year, resulting in a waste of natural resources and a threat to the environment. In this context, the reutilization of eggshell waste has gained increasing attentions. Meanwhile, the overuse of antibiotics has led to the emergence of many drug-resistant bacteria, which greatly endangers public health. Therefore, manufacturing new materials with strong antimicrobial activities has become the focus of many researchers. Recent studies have revealed that eggshells can be applied as solid substances, the raw materials for calcium oxide, and the calcium source for synthesizing hydroxyapatite or other materials with antimicrobial activities. Herein, the preparation methods, antibacterial mechanisms and the applications of these eggshell waste-derived antibacterial materials are summarized in this review. Finally, the current challenges and future directions in this field are discussed.

Functionalized Mesoporous Thin Films for Biotechnology

Mesoporous materials bear great potential for biotechnological applications due to their biocompatibility and versatility. Their high surface area and pore interconnection allow the immobilization of molecules and their subsequent controlled delivery. Modifications of the mesoporous material with the addition of different chemical species, make them particularly suitable for the production of bioactive coatings. Functionalized thin films of mesoporous silica and titania can be used as scaffolds with properties as diverse as promotion of cell growth, inhibition of biofilms formation, or development of sensors based on immobilized enzymes. The possibility to pattern them increase their appeal as they can be incorporated into devices and can be tailored both with respect to architecture and functionalization. In fact, selective surface manipulation is the ground for the fabrication of advanced micro devices that combine standard micro/nanofluids with functional materials. In this review, we will present the advantages of the functionalization of silica and titania mesoporous materials deposited in thin film. Different functional groups used to modify their properties will be summarized, as well as functionalization methods and some examples of applications of modified materials, thus giving an overview of the essential role of functionalization to improve the performance of such innovative materials.

Fundamentals and recent progress relating to the fabrication, functionalization and characterization of mesostructured materials using diverse synthetic methodologies

Since 1990 and the invention of the very first generation of ordered mesoporous silica materials, several innovative methodologies have been applied to synthesize, characterize, and modify silica/non-silica mesoporous materials. The growth of the mesoporous materials field has generated significant environmental and economic advantages compared to various other industrial developments. According to the literature, there are several key synthesis approaches and parameters that can affect the structural, textural and morphological characteristics of mesoporous materials. To date, huge attempts have been made to maximize the activities and selectivities of these materials through either the in situ or post-synthesis functionalization of the large interior surface areas and internal mesostructured frameworks in the presence of specific organic/inorganic components. However, the main challenge is to provide good control over the incorporation and distribution of multiple guest components within the mesostructured hosts. Mesostructured materials have received great attention for various applications, such as being used in electronics, medicine, photocatalysis, catalyst supports, catalysis, absorbers, sensors, gas separation, etc. In the current paper, several recent developments have been highlighted and reviewed regarding the fabrication and characterization of siliceous/non-siliceous mesoporous materials via various synthetic approaches. Furthermore, the availability of diverse functionalization methods has been reviewed to provide comprehensive approaches for synthesizing new generations of suitably modified mesoporous materials with superior structural, physicochemical, and textural characteristics.

Since 1990 and the invention of the very first generation of ordered mesoporous silica materials, several innovative methodologies have been applied to synthesize, characterize, and modify silica/non-silica mesoporous materials.

Mesoporous magnetic silica particles modified with stimuli-responsive P(NIPAM-DMA) valve for controlled loading and release of biologically active molecules

Mesoporous magnetic silica particles bearing a stimuli-responsive polymer valve were prepared and their performance as a microcapsule was evaluated. In this study, first, mesoporous magnetic iron oxide (Fe3O4) particles were prepared by a solvothermal method. Then, the magnetic particles were coated with silica and functionalized with vinyl groups using 3-(trimethoxysilyl)-propyl methacrylate (MPS). Subsequently, the Fe3O4/SiO2 composite particles grafted with MPS were used to carry out the seeded precipitation copolymerization of N-isopropylacrylamide (NIPAM) and 2,2-dimethylaminoethyl methacrylate (DMA). Here N,N'-methylenebisacrylamide (MBA) was used as a cross-linker. Brunauer-Emmett-Teller (BET) surface analysis suggested that the mesoporous structure was retained in the final Fe3O4/SiO2/P(NIPAM-DMA-MBA) composite hydrogel particles. The prepared Fe3O4/SiO2/P(NIPAM-DMA-MBA) composite hydrogel microspheres exhibited a pH-dependent volume phase transition. At lower pH values (<7), the inclusion of DMA shifted the volume phase transition to higher temperature because of the protonation of the tertiary amine groups. The composite hydrogel particles possessed a high saturation magnetization (51 emu g-1) and moved under the influence of an external magnetic field. The loading-release behaviour of these biologically active molecules suggested that a portion of the encapsulated guest molecules was released at a temperature below the lower critical solution temperature, LCST (<35 °C).

Functionally Active Membrane Proteins Incorporated in Mesostructured Silica Films

A versatile synthetic protocol is reported that allows high concentrations of functionally active membrane proteins to be incorporated in mesostructured silica materials. Judicious selections of solvent, surfactant, silica precursor species, and synthesis conditions enable membrane proteins to be stabilized in solution and during subsequent coassembly into silica-surfactant composites with nano- and mesoscale order. This was demonstrated by using a combination of nonionic ( n-dodecyl-β-d-maltoside or Pluronic P123), lipid-like (1,2-diheptanoyl- s n-glycero-3-phosphocholine), and perfluoro-octanoate surfactants under mild acidic conditions to coassemble the light-responsive transmembrane protein proteorhodopsin at concentrations up to 15 wt % into the hydrophobic regions of worm-like mesostructured silica materials in films. Small-angle X-ray scattering, electron paramagnetic resonance spectroscopy, and transient UV-visible spectroscopy analyses established that proteorhodopsin molecules in mesostructured silica films exhibited native-like function, as well as enhanced thermal stability compared to surfactant or lipid environments. The light absorbance properties and light-activated conformational changes of proteorhodopsin guests in mesostructured silica films are consistent with those associated with the native H+-pumping mechanism of these biomolecules. The synthetic protocol is expected to be general, as demonstrated also for the incorporation of functionally active cytochrome c, a peripheral membrane protein enzyme involved in electron transport, into mesostructured silica-cationic surfactant films.

Versatile design and synthesis of mesoporous sulfonic acid catalysts

Mesoporous sulfonic acid catalysts (MSAC) are widely used in acid-catalyzed reactions, including biomass conversions with plenty of polar solvents and precursors. The catalytic efficiency of MSAC is greatly affected by the microenvironment around the sulfonic acid sites. In this review, the progress on modification of microenvironment of MSAC is reviewed over the past decade. Hydrophobic modification allows MSAC prevent the adhesion of water molecules onto sulfonic acid sites, to abate the risk of reduced acid strength and catalytic efficiency. In comparison, hydrophilic properties can bring positive effect on acid-catalyzed reactions with the aid of hydrophilic interaction between polar functional groups on MSAC and hydrophilic groups of specific substrates. Amphiphilic MSAC with tunable wettability for specific substrates and solvents tend to improve the efficiency in certain reactions with mixed solvents or reactants of different polarity, especially for biphasic systems of immiscible liquids. Furthermore, much attention has been attracted on modification of surface to simulate the microenvironment of homogeneous solvents and enzyme biocatalysts in recent research. New trends of this field are also highlighted.

Amino- and thiol-modified microporous silicalite-1 and mesoporous MCM-48 materials as potential effective adsorbents for Pb(II) in polluted aquatic systems

Aluminum-free zeolite silicalite-1 and the ordered mesoporous silicates Mobile Crystalline Material No. 48 (MCM-48) were prepared and functionalized with 3-aminopropyltriethoxysilane (APTES) and 3-mercaptopropyltrimethoxysilane (MPTMS) for the enhancement of adsorption capacity. Functionalization via post synthesis grafting method was adopted and the functionalized silicate systems were denoted as silicalite-1-NH2, silcalite-1-SH, MCM-48-NH2 and MCM-48-SH. Functionalization, that was confirmed by XRD, FT-IR and surface area measurements, indicated no structural changes on the silicate materials. The adsorption of Pb(II) ions into these modified silicates was investigated in aqueous solutions with optimized pH at 5.5 where adsorption influencing factors including contact time, adsorbent dose and metal ion initial concentration were studied. Adsorption experimental data for silicalite-1-NH2, MCM-48-NH2 and MCM-48-SH showed satisfactory correlation with Langmuir and Freundlich models. According to Langmuir isotherm, the maximum capacities for the above three modified silicate systems, for 100 ppm Pb(II) dose, are 43.5, 75.2 and 31.2 mg/g and with Kf constant values of 16.9, 44.4 and 12.0 L/mg from Freundlich isotherm, respectively. The three modified silicate systems exhibited complete sequestration of Pb(II) ion concentrations in the range 0.48–1.7 ppm from samples collected from Zarqa River in four seasons of the year 2013.

Studies on MCM-41/PDMS based hybrid polybenzoxazine nanocomposites for interlayer low k dielectrics

The development of thermally stable mesoporous silica/siloxane based hybrid polybenzoxazine nanocomposites as an interlayer low k dielectric material.

The influence of experimental silane primers on dentin bond strength and morphology: a laboratory and finite element analysis study

STATEMENT OF PROBLEM

The inconsistency of dentin bonding affects retention and microleakage.

PURPOSE

The purpose of this laboratory and finite element analysis study was to investigate the effects on the formation of a hybrid layer of an experimental silane coupling agent containing primer solutions composed of different percentages of hydroxyethyl methacrylate.

MATERIAL AND METHODS

A total of 125 sound human premolars were restored in vitro. Simple class I cavities were formed on each tooth, followed by the application of different compositions of experimental silane primers (0%, 5%, 25%, and 50% of hydroxyethyl methacrylate), bonding agents, and dental composite resins. Bond strength tests and scanning electron microscopy analyses were performed. The laboratory experimental results were validated with finite element analysis to determine the pattern of stress distribution. Simulations were conducted by placing the restorative composite resin in a premolar tooth by imitating simple class I cavities. The laboratory and finite element analysis data were significantly different from each other, as determined by 1-way ANOVA. A post hoc analysis was conducted on the bond strength data to further clarify the effects of silane primers.

RESULTS

The strongest bond of hybrid layer (16.96 MPa) was found in the primer with 25% hydroxyethyl methacrylate, suggesting a barely visible hybrid layer barrier. The control specimens without the application of the primer and the primer specimens with no hydroxyethyl methacrylate exhibited the lowest strength values (8.30 MPa and 11.78 MPa) with intermittent and low visibility of the hybrid layer. These results were supported by finite element analysis that suggested an evenly distributed stress on the model with 25% hydroxyethyl methacrylate.

CONCLUSIONS

Different compositions of experimental silane primers affected the formation of the hybrid layer and its resulting bond strength.

Mesoporous silicas with tunable morphology for the immobilization of laccase

Siliceous ordered mesoporous materials (OMM) are gaining interest as supports for enzyme immobilization due to their uniform pore size, large surface area, tunable pore network and the introduction of organic components to mesoporous structure. We used SBA-15 type silica materials, which exhibit a regular 2D hexagonal packing of cylindrical mesopores of uniform size, for non-covalent immobilization of laccase. Synthesis conditions were adjusted in order to obtain supports with different particle shape, where those with shorter channels had higher loading capacity. Despite the similar isoelectric points of silica and laccase and the close match between the size of laccase and the pore dimensions of these SBA-15 materials, immobilization was achieved with very low leaching. Surface modification of macro-/mesoporous amorphous silica by grafting of amine moieties was proved to significantly increase the isoelectric point of this support and improve the immobilization yield.

Mesoporous europo-gadolinosilicate nanoparticles as bimodal medical imaging agents and a potential theranostic platform

The mesoporous structure of sol-gel prepared gadolinium and europium doped silicate nanoparticles has been found to be highly dependent on the formulated composition, with synthesised samples displaying both disordered and hexagonally ordered mesoporous packing symmetry. The degree of pore ordering within the nanoparticles has a strong correlation with the total lanthanide (Gd(3+) and Eu(3+) ) concentration. The gadolinosilicates are excellent magnetic resonance imaging (MRI) longitudinal (T1 ) agents. The longitudinal relaxivity (r1 ) and transverse (r2 ) relaxivity, a measure of MRI contrast agent efficiency, were up to four times higher than the clinically employed Omniscan (gadodiamide); with r1 up to 20.6 s(-1) mM(-1) and r2 of 66.2 s(-1) mM(-1) compared to 5.53 and 4.64 s(-1) mM(-1) , respectively, for Omniscan. In addition, the europium content of all the samples studied is below the self-quenching limit, which results in a strong luminescence response from the nanoparticles on excitation at 250 nm. The Eu-Gd silicate nanoparticles act as bimodal imaging agents for MRI and luminescence. These mesoporous nanoparticles also have the potential to serve as encapsulation and controlled release matrices for pharmaceuticals. They are therefore a promising multimodal theranostic platform.

Salt effects on the air/solution interfacial properties of PEO-containing copolymers: equilibrium, adsorption kinetics and surface rheological behavior

Lithium cations are known to form complexes with the oxygen atoms of poly(oxyethylene) chains. The effect of Li(+) on the surface properties of three block-copolymers containing poly(oxyethylene) (PEO) have been studied. Two types of copolymers have been studied, a water soluble one of the pluronic family, PEO-b-PPO-b-PEO, PPO being poly(propyleneoxyde), and two water insoluble ones: PEO-b-PS and PEO-b-PS-b-PEO, PS being polystyrene. In the case of the pluronic the adsorption kinetics, the equilibrium surface tension isotherm and the aqueous/air surface rheology have been measured, while for the two insoluble copolymers only the surface pressure and the surface rheology have been studied. In all the cases two different Li(+) concentrations have been used. As in the absence of lithium ions, the adsorption kinetics of pluronic solutions shows two processes, and becomes faster as [Li(+)] increases. The kinetics is not diffusion controlled. For a given pluronic concentration the equilibrium surface pressure increases with [Li(+)], and the isotherms show two surface phase transitions, though less marked than for [Li(+)]=0. A similar behavior was found for the equilibrium isotherms of PEO-b-PS and PEO-b-PS-b-PEO. The surface elasticity of these two copolymers was found to increase with [Li(+)] over the whole surface concentration and frequency ranges studied. A smaller effect was found in the case of the pluronic solutions. The results of the pluronic solutions were modeled using a recent theory that takes into account that the molecules can be adsorbed at the surface in two different states. The theory gives a good fit for the adsorption kinetics and a reasonably good prediction of the equilibrium isotherms for low and intermediate concentrations of pluronic. However, the theory is not able to reproduce the isotherm for [Li(+)]=0. Only a semi-quantitative prediction of the surface elasticity is obtained for [pluronic]≤1×10(-3) mM.

Effect of metal ion hydration on the interaction between sodium carboxylates and aluminum(III) or chromium(III) ions in aqueous solution

The interaction between sodium octanoate, decanoate, and dodecanoate and aluminum(III) and chromium(III) has been studied in water at natural pH values, starting well below the surfactant critical micelle concentration, using electrical conductivity, turbidity, and potentiometric measurements. With decanoate or dodecanoate, maximum interaction occurs at 3:1 stoichiometry, corresponding to charge neutralization. Although the solutions become turbid with both metal ions, indicating phase separation, differences are observed and attributed to the fact that aluminum(III) is relatively labile to substitution and rapidly replaces its water ligands, whereas chromium(III) is substitution inert. This shows up in well-defined floc formation with Al(3+), whereas Cr(3+) suspensions do not precipitate, probably because that replacement of coordinated water by carboxylate ligands is impeded. This can be overcome by increasing temperature, and differences in the thermal behavior with Al(3+) and Cr(3+) are suggested to be due to increased involvement of substitution reactions in the latter case. The effect of octanoate on the trivalent metal ions is less clear, and with Cr(3+) interaction only occurs when the carboxylate is in excess. Hydrophobic interactions between alkyl chains play a major role in driving phase separation. At high surfactant concentrations, the solid phases do not dissolve, in contrast to what is observed with the corresponding alkylsulfates. This has implications for use of these systems in metal separation through froth flotation. The concentration of metal ions in supernatant solution has been determined for sodium dodecanoate and sodium dodecylsulfate with Al(3+) and Cr(3+) over the whole surfactant concentration range by inductively coupled plasma-mass spectrometry (ICP-MS). From this, association constants have been determined and are found to be larger for the carboxylate than the alkylsulfate, in agreement with the greater Lewis basicity of the -CO(2)(-) group.

Porosity and surface properites of SBA-15 with grafted PNIPAAM: a water sorption calorimetry study

Mesoporous silica SBA-15 was modified in a three-step process to obtain a material with poly-N-isopropylacrylamide (PNIPAAM) grafted onto the inner pore surface. Water sorption calorimetry was implemented to characterize the materials obtained after each step regarding the porosity and surface properties. The modification process was carried out by (i) increasing the number of surface silanol groups, (ii) grafting 1-(trichlorosilyl)-2-(m-/p-(chloromethylphenyl) ethane, acting as an anchor for (iii) the polymerization of N-isopropylacrylamide. Water sorption isotherms and the enthalpy of hydration are presented. Pore size distributions were calculated on the basis of the water sorption isotherms by applying the BJH model. Complementary measurements with nitrogen sorption and small-angle X-ray diffraction are presented. The increase in the number of surface silanol groups occurs mainly in the intrawall pores, the anchor is mainly located in the intrawall pores, and the intrawall pore volume is absent after the surface grafting of PNIPAAM. Hence, PNIPAAM seals off the intrawall pores. Water sorption isotherms directly detect the presence of intrawall porosity. Pore size distributions can be calculated from the isotherms. Furthermore, the technique provides information regarding the hydration capability (i.e., wettability of different chemical surfaces) and thermodynamic information.

Carbon dioxide sorbents with propylamine groups-silica functionalized with a fractional factorial design approach

Mesoporous silica particles (Davisil) were functionalized with aminopropyltriethoxysilane (APTES) in a fractional factorial design with 19 different synthesis and uptake experiments. The number of amino groups and the uptake of CO(2) were optimized in a 2(V)(5-1) design. Most important to functionalization was the amount of water present during synthesis, the reaction time, and pretreating the silica with a mineral acid; certain two-way interactions were shown to be statistically significant as well. Modifications performed at 110 or 80 °C showed no significant differences concerning amine content or uptake of CO(2). Properly choosing center points for the discrete variables is problematic and is somewhat related to the lack of fit with respect to CO(2) uptake; the regression was good. Solid-state (29)Si NMR showed that the APTES was mainly fully condensed. Specific surface areas did not correlate with the number of n-propylamine groups on the silica, which is indicative of differential levels of heterogeneity in the coverage of propylamines. The uptake of CO(2) and N(2) was measured from -20 to 70 °C and from 0 to 1 bar and parametrized by the Freundlich isotherm. Amine-modified silica adsorbed significant amounts of CO(2), especially at the low partial pressure, which is important for CO(2) capture from flue gas. At such pressures, samples with a high density of amine (4 amines/nm(2)) showed a much higher uptake of CO(2) than did those with densities of ∼2-3 amines/nm(2), reflecting differential tendencies to form propylammonium-propylcarbamate ion pairs; these require close proximity among amine groups to form. Water affected the uptake of carbon dioxide in different ways. Certain samples took up more moist CO(2) gas than dry CO(2), and others took up less moist CO(2) than dry CO(2), which is indicative of differential tendencies toward water adsorption. We conclude that experimental design is a time-efficient approach to the functionalization of silica with propylamine groups.

Functional materials: from hard to soft porous frameworks

This Review aims to give an overview of recent research in the area of porous, organic-inorganic and purely organic, functional materials. Possibilities for introducing organic groups that exhibit chemical and/or physical functions into porous materials will be described, with a focus on the incorporation of such functional groups as a supporting part of the pore walls. The number of organic groups in the network can be increased such that porous, purely organic materials are obtained.

Hybrid inorganic-organic adsorbents Part 1: Synthesis and characterization of mesoporous zirconium titanate frameworks containing coordinating organic functionalities

A series of functional hybrid inorganic-organic adsorbent materials have been prepared through postsynthetic grafting of mesoporous zirconium titanate xerogel powders using a range of synthesized and commercial mono-, bis-, and tris-phosphonic acids, many of which have never before been investigated for the preparation of hybrid phases. The hybrid materials have been characterized using thermogravimetric analysis, diffuse reflectance infrared (DRIFT) and 31P MAS NMR spectroscopic techniques and their adsorption properties studied using a 153Gd radiotracer. The highest level of surface functionalization (molecules/nm2) was observed for methylphosphonic acid (∼3 molecules/nm2). The level of functionalization decreased with an increase in the number of potential surface coordinating groups of the phosphonic acids. Spectral decomposition of the DRIFT and 31P MAS NMR spectra showed that each of the phosphonic acid molecules coordinated strongly to the metal oxide surface but that for the 1,1-bis-phosphonic acids and tris-phosphonic acids the coordination was highly variable resulting in a proportion of free or loosely coordinated phosphonic acid groups. Functionalization of a porous mixed metal oxide framework with the tris-methylenephosphonic acid (ATMP-ZrTi-0.33) resulted in a hybrid with the highest affinity for 153Gd3+ in nitric acid solutions across a wide range of acid concentrations. The ATMP-ZrTi-0.33 hybrid material extracted 153Gd3+ with a Kd value of 1×10(4) in 0.01 M HNO3 far exceeding that of the other hybrid phases. The unfunctionalized mesoporous mixed metal oxide had negligible affinity for Gd3+ (Kd<100) under identical experimental conditions. It has been shown that the presence of free or loosely coordinated phosphonic acid groups does not necessarily translate to affinity for 153Gd3+. The theoretical cation exchange capacity of the ATMP-ZrTi-0.33 hybrid phase for Gd3+ has been determined to be about 0.005 mmol/g in 0.01 M HNO3. This behavior and that of the other hybrid phases suggests that the surface-bound ATMP ligand functions as a chelating ligand toward 153Gd3+ under these acidic conditions.