Solvophobicity and amphiphilic self-assembly in neoteric and nanostructured solvents

Getting together without water: Lipid self-assembly in polar non-aqueous solvents

Self-assembled structures have numerous applications including drug delivery, solubilization, and food science. However, to date investigations into self-assembled structures have been largely limited to water, with some additives. This limits the types of assemblies that can form, as well as the accessible temperature range. Non-aqueous, polar solvents such as ionic liquids and deep eutectic solvents offer alternative self-assembly media that can overcome many of these challenges. These novel solvents can be designed to support specific types of assemblies or to remain stable under more extreme conditions. This review highlights recent advances in the field of self-assembly in polar non-aqueous solvents. Here we quantify the contribution of certain solvent properties such as nanostructure and solvent cohesion to lipid self-assembly. While this field is still relatively new, preliminary design rules are emerging, such as increasing hydrophobic regions leading to decreasing solvent cohesion, with a consequent reduction in lipid phase diversity. Ultimately, this review demonstrates the capacity for solvent control of lipid assemblies while also drawing attention to areas that need further work. With more systematic studies, solvents could be explicitly designed to achieve specific lipid assemblies for use in target applications, such as cargo delivery to particular cell types (e.g. cancerous), or triggered release under desired conditions (e.g. pH for release on wound infection).

Bulk Nanostructure of Mixtures of Choline Arginate, Choline Lysinate, and Water

Neutron diffraction with empirical potential structure refinement was used to investigate the bulk liquid nanostructure of mixtures of choline arginate (Ch[Arg]), choline lysinate (Ch[Lys]), and water at mole ratios of 1Ch[Arg]:1Ch[Lys]:6H2O (balanced), 1Ch[Arg]:1Ch[Lys]:20H2O (balanced dilute), 3Ch[Arg]:1Ch[Lys]:12H2O (Arg- rich), and 1Ch[Arg]:3Ch[Lys]:12H2O (Lys- rich). The Arg- and Lys- anions tend not to associate due to electrostatic repulsion between charge groups and weak anion-anion attractions. This means that the local ion structures around the anions in these mixtures resemble the parent single-component systems. The bulk liquid nanostructure varies with the Arg-:Lys- ratio. In the Lys--rich mixture (1Ch[Arg]:3Ch[Lys]:12H2O), Lys- side chains cluster into a continuous apolar domain separated from a charged domain of polar groups. In the balanced mixture (1Ch[Arg]:1Ch[Lys]:6H2O), Lys- side chains form discrete apolar aggregates within a continuous polar domain of Arg-, Ch+, and water, and in the Arg--rich mixture (3Ch[Arg]:1Ch[Lys]:12H2O), the distribution of Lys- and Arg- is nearly homogeneous. Finally, in the balance dilute system (1Ch[Arg]:1Ch[Lys]:20H2O), a percolating water domain forms.

Are nature's strategies the solutions to the rational design of low-melting, lipophilic ionic liquids?

Ionic liquids (ILs) have emerged as a new class of materials, displaying a unique capability to self-assemble into micelles, liposomes, liquid crystals, and microemulsions. Despite evident interest, advancements in the controlled formation of amphiphilic ILs remain in the early stages. Taking inspiration from nature, we introduced the concept of lipid-like (or lipid-inspired) ILs more than a decade ago, aiming to create very low-melting, highly lipophilic ILs that are potentially bio-innocuous - a combination of attributes that is frequently antithetical but highly desirable from several application-specific standpoints. Lipid-like ILs are a subclass of functional organic liquid salts that include a range of lipidic side chains such as saturated, unsaturated, linear, branched, and thioether while retaining melting points below room temperature. It was observed in several homologous series of [Cnmim] ILs that elongation of N-appended alkyl chains to greater than seven carbons leads to a substantial increase in melting point (Tm) - which is the most characteristic feature of ILs. Accordingly, it is challenging to develop ILs with low Tm values while preserving their hydrophobicity and self-organizing properties. We found that two alternative Tm depressive approaches are useful. One of these is the replacement of the double bonds with thioether moieties in the alkyl chains, as detailed in several published papers detailing the chemistry of these ILs. Employing thiol-ene and thiol-yne click reactions is a facile, robust, and orthogonal method to overcome the challenges associated with the synthesis of alkyl thioether-functionalized ILs. The second approach involves replacing the double bonds with the cisoid cyclopropyl motif, mimicking the strategy used by certain organisms to modulate cell membrane fluidity. This discovery has the potential to greatly impact the utilization of lipid-like ILs in various applications, including gene delivery, lubricants, heat transfer fluids, and haloalkane separations, among others. This feature article presents a concise, historical overview, highlighting key findings from our work while offering speculation about the future trajectory of this de novo class of soft organic-ion materials.

Organic iontronic memristors for artificial synapses and bionic neuromorphic computing

To tackle the current crisis of Moore's law, a sophisticated strategy entails the development of multistable memristors, bionic artificial synapses, logic circuits and brain-inspired neuromorphic computing. In comparison with conventional electronic systems, iontronic memristors offer greater potential for the manifestation of artificial intelligence and brain-machine interaction. Organic iontronic memristive materials (OIMs), which possess an organic backbone and exhibit stoichiometric ionic states, have emerged as pivotal contenders for the realization of high-performance bionic iontronic memristors. In this review, a comprehensive analysis of the progress and prospects of OIMs is presented, encompassing their inherent advantages, diverse types, synthesis methodologies, and wide-ranging applications in memristive devices. Predictably, the field of OIMs, as a rapidly developing research subject, presents an exciting opportunity for the development of highly efficient neuro-iontronic systems in areas such as in-sensor computing devices, artificial synapses, and human perception.

Bulk nanostructure of a deep eutectic solvent with an amphiphilic hydrogen bond donor

Neutron diffraction with empirical potential structure refinement (EPSR) show the deep eutectic solvent (DES) 1 : 4 choline chloride : butyric acid is amphiphilically nanostructured. Nanostructure results from solvophobic interactions between the alkyl chains of the butyric acid hydrogen bond donor (HBD) and is retained with addition of 10 wt% water. EPSR fits to the diffraction data is used to produce a three-dimensional model of the liquid which is interrogated to reveal the interactions leading to the solvophobic effect, and therefore nanostructure, in this DES at atomic resolution. The model shows electrostatic and hydrogen bond interactions cause the cation, anion and HBD acid group to cluster into a polar domain, from which the acid alkyl chains are solvophobically excluded into theapolar domain. The polar and apolar domains percolate through the liquid in a bicontinuous sponge-like structure. The effect of adding 10 wt% water is probed, revealing that water molecules are sequestered around the cation and anion within the polar domain, while the neat bulk structure is retained. Alkyl chain packing in the apolar domain becomes slightly better-defined indicating water marginally strengthens solvophobic segregation. These findings reveal bulk self-assembled nanostructure can be produced in DESs via an amphiphilic HBD.

Molecular Architecture Effects on Bulk Nanostructure in Bis(Orthoborate) Ionic Liquids

A series of 19 ionic liquids (ILs) based on phosphonium and imidazolium cations of varying alkyl-chain lengths with the orthoborate anions bis(oxalato)borate [BOB]- , bis(mandelato)borate, [BMB]- and bis(salicylato)borate, [BScB]- , are synthesized and studied using small-angle neutron scattering (SANS). All measured systems display nanostructuring, with 1-methyl-3-n-alkyl imidazolium-orthoborates forming clearly bicontinuous L3 spongelike phases when the alkyl chains are longer than C6 (hexyl). L3 phases are fitted using the Teubner and Strey model, and diffusely-nanostructured systems are primarily fitted using the Ornstein-Zernicke correlation length model. Strongly-nanostructured systems have a strong dependence on the cation, with molecular architecture variation explored to determine the driving forces for self-assembly. The ability to form well-defined complex phases is effectively extinguished in several ways: methylation of the most acidic imidazolium ring proton, replacing the imidazolium 3-methyl group with a longer hydrocarbon chain, substitution of [BOB]- by [BMB]- , or exchanging the imidazolium for phosphonium systems, irrespective of phosphonium architecture. The results suggest there is only a small window of opportunity, in terms of molecular amphiphilicity and cation:anion volume matching, for the formation of stable extensive bicontinuous domains in pure bulk orthoborate-based ILs. Particularly important for self-assembly processes appear to be the ability to form H-bonding networks, which offer additional versatility in imidazolium systems.

How Does Nanostructure in Ionic Liquids and Hybrid Solvents Affect Surfactant Self-Assembly?

Ionic liquids (ILs) have recently emerged as novel classes of solvents that support surfactant self-assembly into micelles, liquid crystals, and microemulsions. Their low volatility and wide liquid stability ranges make them attractive for many diverse applications, especially in extreme environments. However, the number of possible ion combinations makes systematic investigations both challenging and rare; this is further amplified when mixtures are considered, whether with water or other H-bonding components such as those found in deep eutectics. In this Perspective we examine what factors determine amphiphilicity, solvophobicity and solvophilicity, in ILs and related exotic environments, in what ways these differ from water, and how the underlying nanostructure of the liquid itself affects the formation and structure of micelles and other self-assembled materials.

Microwave-assisted extraction of antioxidant compounds from by-products of Turkish hazelnut (Corylus avellana L.) using natural deep eutectic solvents: Modeling, optimization and phenolic characterization

An environmentally friendly method using natural deep eutectic solvents (NADES) and microwave-assisted extraction (MAE) for the recovery of bioactive compounds from hazelnut pomace (a hazelnut oil process by-product) was developed to contribute to their sustainable valorization. Eight different NADES were prepared for the extraction of antioxidant constituents from hazelnut pomace, and choline chloride:1,2-propylene glycol (CC-PG) was determined as the most suitable NADES, considering their extraction efficiency and physicochemical properties. After selecting suitable NADES, operational parameters for the MAE process of antioxidants from hazelnut pomace were optimized and modeled using response surface methodology. For the highest recovery of antioxidants, the operational parameters of the MAE process were found to be 24% water, 38 min, 92 °C and 18 mL/0.1 g-DS. Under optimized conditions, extracts of both pomace as a by-product and unprocessed hazelnut flours of three different hazelnut samples (Tombul, Çakıldak, and Palaz) were prepared, and their antioxidant capacities were evaluated by spectrophotometric methods. Antioxidant capacities of CC-PG extracts of all hazelnut samples were 2-3 times higher than those of ethanolic extracts. In addition, phenolic characterization of the prepared extracts was carried out using the UPLC-PDA-ESI-MS/MS system. The results of this study suggest that hazelnut by-products can potentially be considered an important and readily available source of natural antioxidants. Furthermore, the modeled MAE procedure has the potential to create an effective and sustainable alternative for pharmaceutical and food industries.

Conformation of poly(ethylene glycol) in aqueous cholinium amino acid hybrid solvents

HYPOTHESIS

Hybrid solvents based on cholinium amino acid ionic liquids ([Ch][AA] ILs) mixed with water are environmentally benign solvents with low toxicity. [Ch][AA] ILs are used in biomass pretreatment processes to dissolve targeted (macro)molecules such as lignin from lingnocellulose. Understanding how [Ch][AA] ILs dissolve polymers is therefore of great interest for the rational design of ILs towards industrial application. Variation of the IL anion and the water concentration are hypothesised to change the solvent properties of [Ch][AA] hybrid solvents. Therefore, we probe the solvent quality of [Ch][AA] aqueous solutions with different anions (glycinate, prolinate and argininate) and water concentration for the simple model solute poly(ethylene glycol) (PEG).

EXPERIMENTS

Partial phase diagrams were produced to probe the salting-out effect of [Ch][AA] ILs towards PEG (M_w = 38 kDa). Small-angle neutron scattering experiments of deuterated PEG in hydrogenous [Ch][AA] aqueous solutions were performed to determine the polymer radius of gyration at infinite dilution (R_g,0) via Zimm-plots. Polymer concentration dependent apparent R_g values were obtained fitting an excluded volume polymer model onto the scattering data. Blends of hydrogenous and deuterated PEG under zero average contrast conditions were analysed to probe R_g at high polymer concentrations.

FINDINGS

Hydrogen bond capacity of the anion is key to the salting-out effect of [Ch][AA] ILs on PEG. R_g,0 depends on anion species and water concentration. At IL:water = 1:30 (mole:mole) and 37 °C, cholinium argininate and cholinium glycinate are close to theta solvents while cholinium prolinate and dilute cholinium argininate (IL:water = 1:100) are between theta and good solvents.

Bulk and interfacial nanostructure and properties in deep eutectic solvents: Current perspectives and future directions

Deep eutectic solvents (DESs) are a tailorable class of solvents that are rapidly gaining scientific and industrial interest. This is because they are distinct from conventional molecular solvents, inherently tuneable via careful selection of constituents, and possess many attractive properties for applications, including catalysis, chemical extraction, reaction media, novel lubricants, materials chemistry, and electrochemistry. DESs are a class of solvents composed solely of hydrogen bond donors and acceptors with a melting point lower than the individual components and are often fluidic at room temperature. A unique feature of DESs is that they possess distinct bulk liquid and interfacial nanostructure, which results from intra- and inter-molecular interactions, including coulomb forces, hydrogen bonding, van der Waals interactions, electrostatics, dispersion forces, and apolar-polar segregation. This nanostructure manifests as preferential spatial arrangements of the different species, and exists over several length scales, from molecular- to nano- and meso-scales. The physicochemical properties of DESs are dictated by structure-property relationships; however, there is a significant gap in our understanding of the underlying factors which govern their solvent properties. This is a major limitation of DES-based technologies, as nanostructure can significantly influence physical properties and thus potential applications. This perspective provides an overview of the current state of knowledge of DES nanostructure, both in the bulk liquid and at solid interfaces. We provide definitions which clearly distinguish DESs as a unique solvent class, rather than a subset of ILs. An appraisal of recent work provides hints towards trends in structure-property relationships, while also highlighting inconsistencies within the literature suggesting new research directions for the field. It is hoped that this review will provide insight into DES nanostructure, their potential applications, and development of a robust framework for systematic investigation moving forward.

Long-Range Electrostatic Colloidal Interactions and Specific Ion Effects in Deep Eutectic Solvents

While the traditional consensus dictates that high ion concentrations lead to negligible long-range electrostatic interactions, we demonstrate that electrostatic correlations prevail in deep eutectic solvents where intrinsic ion concentrations often surpass 2.5 M. Here we present an investigation of intermicellar interactions in 1:2 choline chloride:glycerol and 1:2 choline bromide:glycerol using small-angle neutron scattering. Our results show that long-range electrostatic repulsions between charged colloidal particles occur in these solvents. Interestingly, micelle morphology and electrostatic interactions are modulated by specific counterion condensation at the micelle interface despite the exceedingly high concentration of the native halide from the solvent. This modulation follows the trends described by the Hofmeister series for specific ion effects. The results are rationalized in terms of predominant ion-ion correlations, which explain the reduction in the effective ionic strength of the continuum and the observed specific ion effects.

Self-assembly of ionic and non-ionic surfactants in type IV cerium nitrate and urea based deep eutectic solvent

Understanding and manipulating micelle morphology are key to exploiting surfactants in various applications. Recent studies have shown surfactant self-assembly in a variety of Deep Eutectic Solvents (DESs) where both the nature of surfactants and the interaction of the surfactant molecule with the solvent components influence the size, shape, and morphology of the micelles formed. So far, micelle formation has only been reported in type III DESs, consisting solely of organic species. In this work, we have explored the self-assembly of cationic surfactant dodecyl trimethylammonium nitrate/bromide (C₁₂TANO₃/C₁₂TAB), anionic surfactant sodium dodecyl sulfate (SDS), and non-ionic surfactants hexaethylene glycol monododecyl ether (C₁₂EO₆) and octaethylene glycol monohexadecyl ether (C₁₆EO₈) in a type IV DES comprising metal salt, cerium (III) nitrate hexahydrate, and a hydrogen bond donor, urea, in the molar ratio 1:3.5. C₁₂TANO₃, C₁₂TAB, C₁₂EO₆, and C₁₆EO₈ form spherical micelles in the DES with the micelle size dependent on both the surfactant alkyl chain length and the head group, whereas SDS forms cylindrical micelles. We hypothesize that the difference in the micelle shape can be explained by counterion stabilization of the SDS headgroup by polycations in the DES compared to the nitrate/bromide anion interaction in the case of cationic surfactants or molecular interaction of the urea and the salting out effect of (CeNO₃)₃ in the DES on the alkyl chains/polyethoxy headgroup for non-ionic surfactants. These studies deepen our understanding of amphiphile self-assembly in this novel, ionic, and hydrogen-bonding solvent, raising the opportunity to use these structures as liquid crystalline templates to generate porosity in metal oxides (ceria) that can be synthesized using these DESs.

Using Microemulsions: Formulation Based on Knowledge of Their Mesostructure

Microemulsions, as thermodynamically stable mixtures of oil, water, and surfactant, are known and have been studied for more than 70 years. However, even today there are still quite a number of unclear aspects, and more recent research work has modified and extended our picture. This review gives a short overview of how the understanding of microemulsions has developed, the current view on their properties and structural features, and in particular, how they are related to applications. We also discuss more recent developments regarding nonclassical microemulsions such as surfactant-free (ultraflexible) microemulsions or ones containing uncommon solvents or amphiphiles (like antagonistic salts). These new findings challenge to some extent our previous understanding of microemulsions, which therefore has to be extended to look at the different types of microemulsions in a unified way. In particular, the flexibility of the amphiphilic film is the key property to classify different microemulsion types and their properties in this review. Such a classification of microemulsions requires a thorough determination of their structural properties, and therefore, the experimental methods to determine microemulsion structure and dynamics are reviewed briefly, with a particular emphasis on recent developments in the field of direct imaging by means of electron microscopy. Based on this classification of microemulsions, we then discuss their applications, where the application demands have to be met by the properties of the microemulsion, which in turn are controlled by the flexibility of their amphiphilic interface. Another frequently important aspect for applications is the control of the rheological properties. Normally, microemulsions are low viscous and therefore enhancing viscosity has to be achieved by either having high concentrations (often not wished for) or additives, which do not significantly interfere with the microemulsion. Accordingly, this review gives a comprehensive account of the properties of microemulsions, including most recent developments and bringing them together from a united viewpoint, with an emphasis on how this affects the way of formulating microemulsions for a given application with desired properties.

Complex by design: Hydrotrope-induced micellar growth in deep eutectic solvents

HYPOTHESIS

The self-assembly of ionic surfactants in deep eutectic solvents has recently been demonstrated, opening up new possibilities in terms of the development of formulated products and templating of nanostructured materials. As it occurs in an aqueous environment, the solvophobic effect drives the formation of micelles in these solvents and specific-ion interactions alter the resulting structures. We hypothesized that the presence of hydrotropic salts would greatly affect the micellar structure in deep eutectic solvents, ultimately leading to the formation of worm-like aggregates.

EXPERIMENTS

A systematic investigation performed on hydrotrope-surfactant assemblies in neat and hydrated 1:2 choline chloride:glycerol is presented. The effect of choline salicylate on the micellization of hexadecyltrimethylammonium chloride at different hydrotrope-to-surfactant ratios was probed by contrast variation small-angle neutron scattering.

FINDINGS

Here the first investigation on salt-induced micellar growth in deep eutectic solvents is presented. The microscopic characterization of the system shows that the micelle-hydrotrope interaction in pure and hydrated deep eutectic solvents results in a significant increase in micelle elongation. The condensation of the hydrotrope on the micelle, which alters the effective monomer packing, leads to the formation of worm-like micelles with tunable morphology and flexibility. The results presented here present new possibilities in terms of self-assembly and co-assembly in neoteric solvents, where micelle morphology can be controlled through surfactant-salt interactions.

Morphology Modulation of Ionic Surfactant Micelles in Ternary Deep Eutectic Solvents

Deep eutectic solvents (DES) are potentially greener solvents obtained through the complexation of simple precursors which, among other applications, have been investigated in recent years for their ability to support the self-assembly of amphiphilic molecules. It is crucial to understand the factors which influence surfactant solubility and self-assembly with respect to the interaction of the surfactant molecule with the DES components. In this work, small-angle neutron scattering (SANS) has been used to investigate the micellization of cationic (C_nTAB) and anionic (SDS) surfactants in a ternary DES comprising choline chloride, urea, and glycerol, where the hydrogen bond donors are mixed in varying molar ratios. The results show that in each case either globular or rodlike micelles are formed with the degree of elongation being directly dependent on the composition of the DES. It is hypothesized that this composition dependence arises largely from the poor solubility of the counterions in the DES, especially at low glycerol content, leading to a tighter binding of the counterion to the micelle surface and giving rise to micelles with a high aspect ratio. This potential for accurate control over micelle morphology presents unique opportunities for rheology control or to develop templated syntheses of porous materials in DES, utilizing the solvent composition to tailor micelle shape and size, and hence the pore structure of the resulting material.