Microemulsion: A versatile synthesis tool for photocatalysis

Atomic and Electronic Structures of Co-Doped In2O3 from Experiment and Theory

The synthesis and properties of stoichiometric, reduced, and Co-doped In2O3 are described in the light of several experimental techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet (UV)-visible spectroscopy, porosimetry, and density functional theory (DFT) methods on appropriate models. DFT-based calculations provide an accurate prediction of the atomic and electronic structure of these systems. The computed lattice parameter is linearly correlated with the experimental result in the Co concentration ranging from 1.0 to 5.0%. For higher Co concentrations, the theoretical-experimental analysis of the results indicates that the dopant is likely to be preferentially present at surface sites. The analysis of the electronic structure supports the experimental assignment of Co2+ for the doped material. Experiments and theory find that the presence of Co has a limited effect on the material band gap.

Pharmaceutical Nanoparticles Formation and Their Physico-Chemical and Biomedical Properties

The use of medicinal substances in nanosized forms (nanoforms, nanoparticles) allows the therapeutic effectiveness of pharmaceutical preparations to be increased due to several factors: (1) the high specific surface area of nanomaterials, and (2) the high concentration of surface-active centers interacting with biological objects. In the case of drug nanoforms, even low concentrations of a bioactive substance can have a significant therapeutic effect on living organisms. These effects allow pharmacists to use lower doses of active components, consequently lowering the toxic side effects of pharmaceutical nanoform preparations. It is known that many drug substances that are currently in development are poorly soluble in water, so they have insufficient bioavailability. Converting them into nanoforms will increase their rate of dissolution, and the increased saturation solubility of drug nanocrystals also makes a significant contribution to their high therapeutic efficiency. Some physical and chemical methods can contribute to the formation of both pure drug nanoparticles and their ligand or of polymer-covered nanoforms, which are characterized by higher stability. This review describes the most commonly used methods for the preparation of nanoforms (nanoparticles) of different medicinal substances, paying close attention to modern supercritical and cryogenic technologies and the advantages and disadvantages of the described methods and techniques; moreover, the improvements in the physico-chemical and biomedical properties of the obtained medicinal nanoforms are also discussed.

Composites of Montmorillonite and Titania Nanoparticles Prepared by Inverse Microemulsion Method: Physico-Chemical Characterization

TiO₂/montmorillonite composites were synthesized using inverse micellar route for the preparation of titania nanoparticles (4-6 nm diameter) in 1-hexanol and for the dispersion of one of the clay components. Two series of composites were obtained: one derived from cetyltrimethylammonium organomontmorillonite (CTA-Mt), exfoliated in 1-hexanol, and the other from sodium form of montmorillonite (Na-Mt) dispersed by formation of an inverse microemulsion in 1-hexanol. The TiO₂ content ranged from 16 to 64 wt.%. The composites were characterized with X-ray diffraction, scanning/transmission electron microscopy/energy dispersive X-ray spectroscopy, thermal analysis, and N₂ adsorption-desorption isotherms. The Na-Mt-derived component was shown to undergo transformation to CTA-Mt, as indicated by basal spacing of 17.5 nm, due to the interaction with the CTABr surfactant in inverse microemulsion. It was also better dispersed and intermixed with TiO₂ nanoparticles. As a result, the TiO₂/Na-Mt series displayed superior textural properties, with specific surface area up to 256 m²g^-1 and pore volume up to 0.247 cm³g^-1 compared with 208 m²g^-1 and 0.231 cm³g^-1, respectively, for the TiO₂/CTA-Mt counterpart. Members of both series were uniformly mesoporous, with the dominant pore size around 5 nm, i.e., comparable with the dimensions of titania nanoparticles. The advantage of the adopted synthesis method is discussed in the context of other preparative procedures used for manufacturing of titania-clay composites.

Antimicrobial Effectiveness of Innovative Photocatalysts: A Review

Waterborne pathogens represent one of the most widespread environmental concerns. Conventional disinfection methods, including chlorination and UV, pose several operational and environmental problems; namely, formation of potentially hazardous disinfection by-products (DBPs) and high energy consumption. Therefore, there is high demand for effective, low-cost disinfection treatments. Among advanced oxidation processes, the photocatalytic process, a form of green technology, is becoming increasingly attractive. A systematic review was carried out on the synthesis, characterization, toxicity, and antimicrobial performance of innovative engineered photocatalysts. In recent decades, various engineered photocatalysts have been developed to overcome the limits of conventional photocatalysts using different synthesis methods, and these are discussed together with the main parameters influencing the process behaviors. The potential environmental risks of engineered photocatalysts are also addressed, considering the toxicity effects presented in the literature.

Recent advances in ZnO-based photosensitizers: Synthesis, modification, and applications in photodynamic cancer therapy

Zinc oxide nanoparticles (ZnO NPs) are important semiconductor materials with interesting photo-responsive properties. During the past, ZnO-based NPs have received considerable attention for photodynamic therapy (PDT) due to their biocompatibility and excellent potential of generating tumor-killing reactive oxygen species (ROS) through gentle photodynamic activation. This article provides a comprehensive review of the recent developments and improvements in optical properties of ZnO NPs as photosensitizers for PDT. The optical properties of ZnO-based photosensitizers are significantly dependent on their charge separation, absorption potential, band gap engineering, and surface area, which can be adjusted/tuned by doping, compositing, and morphology control. Here, we first summarize the recent progress in the charge separation capability, absorption potential, band gap engineering, and surface area of nanosized ZnO-based photosensitizers. Then, morphology control that is closely related to their synthesis method is discussed. Following on, the state-of-art for the ZnO-based NPs in the treatment of hypoxic tumors is comprehensively reviewed. Finally, we provide some outlooks on common targeted therapy methods for more effective tumor killing, including the attachment of small molecules, antibodies, ligands molecules, and receptors to NPs which further improve their selective distribution and targeting, hence improving the therapeutic effectiveness. The current review may provide useful guidance for the researchers who are interested in this promising dynamic cancer treatment technology.

Good's buffer ionic liquid tunes the phase behavior of an anionic surfactant SDBS-stabilized n-octane-water microemulsion and the stability of the solubilized horseradish peroxidase

A Good's buffer ionic liquid (GB-IL) composed of quaternary ammonium cations and Good's buffer anions is first introduced into a microemulsion system as a self-buffering and biocompatible electrolyte. The effects of the constituting ions of a GB-IL and their concentrations on the phase behavior of the anionic surfactant SDBS stabilized n-octane-H₂O microemulsion system were studied for the first time using the ε-β fish-like phase diagram method. The result indicates that the phase behavior of the above microemulsion system is greatly affected by GB-IL cations with a longer alkyl chain on the cation being more favorable for phase inversion. Compared with NaCl, a GB-IL of the same concentration is more efficient for achieving phase inversion, due to the dual role of an electrolyte and a co-alcohol. In addition to the phase behavior, the stability of horseradish peroxidase (HRP) solubilized in an SDBS stabilized bicontinuous microemulsion is also affected by a GB-IL. It is found that the variation of the cationic alkyl chain has a negligible effect on the microemulsion microstructure, but has a significant influence on the stability of the solubilized HRP. At a fixed concentration of the GB-IL, the quaternary ammonium cation with a longer alkyl chain is better for the stabilization of the HRP activity. For a given GB-IL, a higher level of the GB-IL results in a better HRP stability. More importantly, the GB-IL-buffered microemulsion, at the same level of the buffering salt, is more advantageous than the phosphate-buffered one for the stabilization of the HRP activity. This advantage is more pronounced for higher concentrations of the GB-IL. This difference in the HRP stability, caused by the buffering salts, should be ascribed to the microemulsion microstructure effect as well as the Hofmeister effect. The present study provides a guideline for the construction of a bicontinuous microemulsion with a simplified composition and stabilizing effect on the solubilized enzyme.

Molten-salt-assisted synthesis of onion-like Co/CoO@FeNC materials with boosting reversible oxygen electrocatalysis for rechargeable Zn-air battery

A melt-salt-assisted method is utilized to construct an onion-like hybrid with Co/CoO nanoparticles embedded in graphitic Fe-N-doped carbon shells (Co/CoO@FeNC) as a bifunctional electrocatalyst. The iron-polypyrrole (Fe-PPy) is firstly prepared with a reverse emulsion. Direct pyrolysis of Fe-PPy yields turbostratic Fe-N-doped carbon (FeNC) with excellent oxygen reduction reaction (ORR) electrocatalysis, while the melt salt (CoCl₂) mediated pyrolysis of Fe-PPy obtains onion-like Co/CoO@FeNC with a reversible overvoltage value of 0.695 V, largely superior to Pt/C and IrO₂ (0.771 V) and other Co-based catalysts reported so far. The ORR activity is mainly due to the graphitic FeNC and further enhanced by CoN_x bonds, whereas the oxygen evolution reaction (OER) activity is principally due to the Co/CoO composite. Concurrently, Co/CoO@FeNC as cathode catalyst enables Zn-air battery with a high open circuit voltage of 1.42 V, a peak power density of 132.8 mW cm^-2, a specific capacity of 813 mAh g_Zn^-1, and long-term stability.

A Critical Review of the Use of Surfactant-Coated Nanoparticles in Nanomedicine and Food Nanotechnology

Surfactants, whose existence has been recognized as early as 2800 BC, have had a long history with the development of human civilization. With the rapid development of nanotechnology in the latter half of the 20th century, breakthroughs in nanomedicine and food nanotechnology using nanoparticles have been remarkable, and new applications have been developed. The technology of surfactant-coated nanoparticles, which provides new functions to nanoparticles for use in the fields of nanomedicine and food nanotechnology, is attracting a lot of attention in the fields of basic research and industry. This review systematically describes these "surfactant-coated nanoparticles" through various sections in order: 1) surfactants, 2) surfactant-coated nanoparticles, application of surfactant-coated nanoparticles to 3) nanomedicine, and 4) food nanotechnology. Furthermore, current progress and problems of the technology using surfactant-coated nanoparticles through recent research reports have been discussed.

How the external solvent in biocompatible reverse micelles can improve the alkaline phosphatase behavior

In the last decade, the nature of the nonpolar solvents that can be part of reverse micelles (RMs) has been the topic of several investigations to improve their applications. In this sense, the hydrolysis of 1-naphthyl phosphate catalyzed by the enzyme alkaline phosphatase (AP) was used as a probe to investigate the effect of the change of the external solvent on RMs formulated with the anionic surfactant sodium diethylhexyl sulfosuccinate (AOT). As external nonpolar solvents, two biocompatible lipophilic esters, isopropyl myristate and methyl laurate, and the traditional nonpolar solvents, n-heptane and benzene, were used. The results were compared among the RMs investigated and with the reaction in homogeneous media. Thus, the effect of the nanoconfinement as well as the impact of the replacement of a conventional external nonpolar solvent by biocompatible solvents were analyzed. The results indicate that the catalytic efficiency in the AOT RMs is larger than that in homogeneous media, denoting a different hydration level over the AP enzyme, which is directly related to the different degrees of nonpolar solvent penetration to the RM interface. Our findings demonstrated that toxic solvents such as n-heptane and benzene can be replaced by nontoxic ones (isopropyl myristate or methyl laurate) in AOT RMs without affecting the performance of micellar systems as nanoreactors, making them a green and promising alternative toward efficient and sustainable chemistry.