Dynamic adhesion due to fluid infusion

Out-of-contact peeling caused by elastohydrodynamic deformation during viscous adhesion

We report on viscous adhesion measurements conducted in sphere-plane geometry between a rigid sphere and soft surfaces submerged in silicone oils. Increasing the surface compliance leads to a decrease in the adhesive strength due to elastohydrodynamic deformation of the soft surface during debonding. The force-displacement and fluid film thickness-time data are compared to an elastohydrodynamic model that incorporates the force measuring spring and finds good agreement between the model and data. We calculate the pressure distribution in the fluid and find that, in contrast to debonding from rigid surfaces, the pressure drop is non-monotonic and includes the presence of stagnation points within the fluid film when a soft surface is present. In addition, viscous adhesion in the presence of a soft surface leads to a debonding process that occurs via a peeling front (located at a stagnation point), even in the absence of solid-solid contact. As a result of mass conservation, the elastohydrodynamic deformation of the soft surface during detachment leads to surfaces that come closer as the surfaces are separated. During detachment, there is a region with fluid drainage between the centerpoint and the stagnation point, while there is fluid infusion further out. Understanding and harnessing the coupling between lubrication pressure, elasticity, and surface interactions provides material design strategies for applications such as adhesives, coatings, microsensors, and biomaterials.

Interface Stabilization in Adhesion Caused by Elastohydrodynamic Deformation

Interfacial instabilities are common phenomena observed during adhesion measurements involving viscoelastic polymers or fluids. Typical probe-tack adhesion measurements with soft adhesives are conducted with rigid probes. However, in many settings, such as for medical applications, adhesives make and break contact from soft surfaces such as skin. Here we study how detachment from soft probes alters the debonding mechanism of a model viscoelastic polymer film. We demonstrate that detachment from a soft probe suppresses Saffman-Taylor instabilities commonly encountered in adhesion. We suggest the mechanism for interface stabilization is elastohydrodynamic deformation of the probe and propose a scaling for the onset of stabilization.

Attachment of bioinspired microfibrils in fluids: transition from a hydrodynamic to hydrostatic mechanism

Reversible and switchable adhesion of elastomeric microstructures has attracted significant interest in the development of grippers for object manipulation. Their applications, however, have often been limited to dry conditions and adhesion of such deformable microfibrils in the fluid environment is less understood. In the present study, we performed adhesion tests in silicone oil using single cylindrical microfibrils of a flat-punch shape with a radius of 80 µm. Stiff fibrils were created using three-dimensional printing of an elastomeric resin with an elastic modulus of 500 MPa, and soft fibrils, with a modulus of 3.3 MPa, were moulded in polyurethane. Our results suggest that adhesion is dominated by hydrodynamic forces, which can be maximized by stiff materials and high retraction velocities, in line with theoretical predictions. The maximum pull-off stress of stiff cylindrical fibrils is 0.6 MPa, limited by cavitation and viscous fingering, occurring at retraction velocities greater than 2 µm s^-1. Next, we add a mushroom cap to the microfibrils, which, in the case of the softer material, deforms upon retraction and leads to a transition to a hydrostatic suction regime with higher pull-off stresses ranging from 0.7 to 0.9 MPa. The effects of elastic modulus, fibril size and viscosity for underwater applications are illustrated in a mechanism map to provide guidance for design optimization.