Advances in food emulsions and foams: reflections on research in the neo-Pickering era

A review on recent development of foam Ceramics prepared by particle-stabilized foaming technique

Particle-stabilized technique for fabricating foam ceramics was developed in 2006. Porous ceramics with porosity over 95% can be prepared by this newly developed method. This foaming technique was derived from the principle of Pickering foam to a large extent. The high internal phase volume, narrow distribution of pore size as well as the structural stability of the Pickering system enable the final ceramic products to realize their functionality in a variety of applications. However, the interfacial aspect of the foaming system determines the final product in many ways, which brings this novel method details to explore and possibilities to challenge. The current review introduces the particle-stabilized method combining with colloid and surface science since particles are the building block of ceramic materials. The history of this newly invented method was mentioned at first, followed by foam ceramic products prepared by this foaming technique combining with corresponding mechanism. Some representative applications involving ceramic materials made by particle-stabilized method were discussed. At last, we conclude the overall article and put forward some outlooks and challenges about the future direction of this unique foaming technique.

Phosphate type dependent phosphorylation on the interfacial and emulsion stabilizing behaviors of goose liver protein: Perspective of protein charging

Elucidation on the emulsifying behaviors of goose liver protein (GLP) from interfacial perspective was scarce when protein charging was altered. This work aimed to elucidate the role of phosphorylation on the interfacial associative interaction and then emulsion stabilizing properties of GLP using three structurally relevant phosphates of sodium trimetaphosphate (STMP), sodium tripolyphosphate (STPP) and sodium pyrophosphate (TSPP). A monotonic increment of protein charging treated from STMP, STPP to TSPP caused progressively increased particle de-aggregation, surface hydrophobicity and structural flexibility of GLP. Compared with STMP and TSPP, STPP phosphorylation rendered the most strengthened interfacial equilibrium pressure (11.98 ± 0.24 mN/m) due to sufficient unfolding but moderated charging character conveyed. Desorption curve and interfacial protein microstructure indicated that STPP phosphorylation caused the highest interfacial connectivity between proteins adsorbed onto the same droplet, as was also verified by interfacial elastic modulus (10.3 ± 0.21 mN/m). STPP treated GLP also yielded lowest droplet size (8.16 ± 0.10 μm), flocculation (8.18%) and Turbiscan stability index (8.78 ± 0.36) of emulsion but most improved microrheological properties. Overall, phosphorylation functioned itself in fortifying the intradroplet protein-protein interaction but restraining the interdroplet aggregation, and STPP phosphorylation endowed the protein with most enhanced interfacial stabilization and emulsifying efficiency.

Lipid oxidation in emulsions: New insights from the past two decades

Lipid oxidation constitutes the main source of degradation of lipid-rich foods, including food emulsions. The complexity of the reactions at play combined with the increased demand from consumers for less processed and more natural foods result in additional challenges in controlling this phenomenon. This review provides an overview of the insights acquired over the past two decades on the understanding of lipid oxidation in oil-in-water (O/W) emulsions. After introducing the general structure of O/W emulsions and the classical mechanisms of lipid oxidation, the contribution of less studied oxidation products and the spatiotemporal resolution of these reactions will be discussed. We then highlight the impact of emulsion formulation on the mechanisms, taking into consideration the new trends in terms of emulsifiers as well as their own sensitivity to oxidation. Finally, novel antioxidant strategies that have emerged to meet the recent consumer's demand will be detailed. In an era defined by the pursuit of healthier, more natural, and sustainable food choices, a comprehensive understanding of lipid oxidation in emulsions is not only an academic quest, but also a crucial step towards meeting the evolving expectations of consumers and ensuring the quality and stability of lipid-rich food products.

Emulsifying properties of plant-derived polypeptide and their conjugates: a self-consistent-field calculation study of the impact of hydrolysis

By considering the hydrolysates of soy protein produced by trypsin as an example, the emulsion stabilizing properties of plant-based protein fragments have been investigated theoretically. We apply Self-Consistent-Field (SCF) calculations to determine the colloidal interactions induced between a pair of droplets stabilized by adsorbed layers of various soy protein fragments. The study is extended to conjugates of such polypeptides, formed by covalent bonding with a suitable hydrophilic sidechain (e.g. a polysaccharide). Our results show that the relatively longer fragments, with a greater number of hydrophobic amino acids, will display a stronger degree of adsorption affinity compared to the smaller hydrolysates, even where the latter may have a higher overall ratio of hydrophobic residues. This suggested that the degree of protein hydrolysis should be carefully controlled and limited to modest values to avoid the generation of a large number of short polypeptides, while still sufficient to improve solubility. While the emulsion stabilizing performance of a protein fragment type is strongly dependent on the conformation it adopts on the interface, we find this to be less critical for the conjugated polypeptides. However, we argue that with increasing degree of hydrolysis, many small fragments will not have the chance to form bonds with polysaccharides. It is demonstrated that the abundance of these unreacted polypeptides in the system severely reduces the efficiency of the conjugated longer protein fragments, preventing their presence on the surface of the droplets through competitive adsorption process.

Microbubbles in Food Technology

Microbubbles are largely unused in the food industry yet have promising capabilities as environmentally friendly cleaning and supporting agents within products and production lines due to their unique physical behaviors. Their small diameters increase their dispersion throughout liquid materials, promote reactivity because of their high specific surface area, enhance dissolution of gases into the surrounding liquid phase, and promote the generation of reactive chemical species. This article reviews techniques to generate microbubbles, their modes of action to enhance cleaning and disinfection, their contributions to functional and mechanical properties of food materials, and their use in supporting the growth of living organisms in hydroponics or bioreactors. The utility and diverse applications of microbubbles, combined with their low intrinsic ingredient cost, strongly encourage their increased adoption within the food industry in coming years.

Targeting Interfacial Location of Phenolic Antioxidants in Emulsions: Strategies and Benefits

It is important to have larger proportions of health-beneficial polyunsaturated lipids in foods, but these nutrients are particularly sensitive to oxidation, and dedicated strategies must be developed to prevent this deleterious reaction. In food oil-in-water emulsions, the oil-water interface is a crucial area when it comes to the initiation of lipid oxidation. Unfortunately, most available natural antioxidants, such as phenolic antioxidants, do not spontaneously position at this specific locus. Achieving such a strategic positioning has therefore been an active research area, and various routes have been proposed: lipophilizing phenolic acids to confer them with an amphiphilic character; functionalizing biopolymer emulsifiers through covalent or noncovalent interactions with phenolics; or loading Pickering particles with natural phenolic compounds to yield interfacial antioxidant reservoirs. We herein review the principles and efficiency of these approaches to counteract lipid oxidation in emulsions as well as their advantages and limitations.

Fabrication of Macroporous Polymers via Water-in-Water Emulsion-Templating Technique

Emulsion-templated porous polymers have attracted broad attention due to their great application prospects in many fields. However, scaling up the emulsion-templated technique from the lab to industrial production remains a great challenge, especially for systems involving an oil-in-water (o/w) emulsion template that is used normally for preparing hydrophilic porous polymers. These systems require large amounts of organic solvents to be the internal phase (i.e., major phase) of the emulsion templates, which causes a significant environmental impact and cost. Herein, a water-in-water (w/w) emulsion-templated technique is presented to prepare porous hydrophilic polymers. The w/w emulsion is prepared by mixing a PEG aqueous solution and a dextran aqueous solution with cellulose nanocrystals (CNCs) as a stabilizer. With varying the mass ratio of dextran/PEG in the range of 1/2 to 8/1, a series of dextran-rich-phase-in-PEG-rich-phase (dextran/PEG) emulsions are obtained. Subsequently, monomers, such as acrylamide, acrylic acid, and/or 2-acrylamido-2-methylpropanesulfonic acid, are introduced to the emulsions to fabricate porous hydrophilic polymers. These polymers have an open-cell structure like those of o/w emulsion-templated polymers. The system developed herein is an environmentally friendly, low cost, and universal emulsion-templated method toward porous hydrophilic polymers, which avoids the defects caused by the presence of large amounts of organic solvents in an o/w emulsion-templating method and can be moved from the lab to industrial-scale production.

W/o/w multiple emulsions: A novel trend in functional ice cream preparations?

•

The possible applications of w/o/w multiple emulsions (MEs) in ice creams are described.

•

W/o/w MEs enable the encapsulation of sensitive compounds.

•

Fat content is reduced using w/o/w MEs without losing the creaminess of the final products.

•

Ice cream is a very suitable matrix for application of Pickering emulsions.

Ice cream is a popular product worldwide. Unfortunatelly, it contains a significant amount of fat. In this review, promising strategies for the use of w/o/w multiple emulsion structures in creams are assessed. W/o/w multiple emulsions (MEs) enable reduction the fat without losing the creamy taste and mouthfeel and also encapsulation of sensitive compounds. The encouraging application and formation of MEs in ice cream mixtures is supported by the use of natural food ingredients, such as fiber, which helps to stabilize the whole system and improves nutritional value. The future trends may be focused on the target stabilizations using Pickering paticles (PPs). The possible advantages, manufacture, evaluation methods, and predicted future prospects of MEs in ice creams are discussed.

A review of recent progress in improving the bioavailability of nutraceutical-loaded emulsions after oral intake

Increasing awareness of the health benefits of specific constituents in fruits, vegetables, cereals, and other whole foods has sparked a broader interest in the potential health benefits of nutraceuticals. Many nutraceuticals are hydrophobic substances, which means they must be encapsulated in colloidal delivery systems. Oil-in-water emulsions are one of the most widely used delivery systems for improving the bioavailability and bioactivity of these nutraceuticals. The composition and structure of emulsions can be designed to improve the water dispersibility, physicochemical stability, and bioavailability of the encapsulated nutraceuticals. The nature of the emulsion used influences the interfacial area and properties of the nutraceutical-loaded oil droplets in the gastrointestinal tract, which influences their digestion, as well as the bioaccessibility, metabolism, and absorption of the nutraceuticals. In this article, we review recent in vitro and in vivo studies on the utilization of emulsions to improve the bioavailability of nutraceuticals. The findings from this review should facilitate the design of more efficacious nutraceutical-loaded emulsions with increased bioactivity.

Effect of Divalent and Monovalent Salts on Interfacial Dilational Rheology of Sodium Dodecylbenzene Sulfonate Solutions

This study presents the equilibrium surface tension (ST), critical micelle concentration (CMC) and the dilational viscoelasticity of sodium dodecylbenzene sulfonate (SDBS)-adsorbed layers in the presence of NaCl, KCl, LiCl, CaCl2 and MgCl2 at 0.001–0.1 M salt concentration. The ST and surface dilational viscoelasticity were determined using bubble-shape analysis technique. To capture the complete profile of dilational viscoelastic properties of SDBS-adsorbed layers, experiments were conducted within a wide range of SDBS concentrations at a fixed oscillating frequency of 0.01 Hz. Salts were found to lower the ST and induce micellar formation at all concentrations. However, the addition of salts increased dilational viscoelastic modulus only at a certain range of SDBS concentration (below 0.01–0.02 mM SDBS). Above this concentration range, salts decreased dilational viscoelasticity due to the domination of the induced molecular exchange dampening the ST gradient. The dilational viscoelasticity of the salts of interest were in the order CaCl2 > MgCl2 > KCl > NaCl > LiCl. The charge density of ions was found as the corresponding factor for the higher impact of divalent ions compared to monovalent ions, while the impact of monovalent ions was assigned to the degree of matching in water affinities, and thereby the tendency for ion-pairing between SDBS head groups and monovalent ions.

Gelation and foaming properties of fatty acid mixtures in sunflower oil

BACKGROUND

The development of lipid-lowering products has become the focus of the food industry due to increasing consumer awareness of the relationship between diet and health. Recently, edible oleofoams have drawn attention due to their enormous potential in reformulating food products with reduced fat content and unique mouth feel.

RESULTS

We have developed an edible oleofoam system by whipping oleogel composed of fatty acid mixtures in sunflower oil. The crystal morphology, gelation properties, and foaming properties of these oleogels could be tailored by changing the ratio of stearic acid (SA) and myristic acid (MA). Specifically, SA/MA = 2:8 (2S8M) was demonstrated to have superior foaming capability and foam stability, likely due to the densely packed and uniformly distributed crystals formed at this fatty acid ratio. Small lipid crystals in 2S8M absorbed to the air-oil interface more efficiently, and together with the strengthened network established in the bulk phase, helped stabilize the foam structure. As a result, the 2S8M oleofoam showed excellent foaming properties: strong plasticity, significantly increased overrun (up to 63.56 ± 2.58%), and significantly improved foam stability. The X-ray diffraction (XRD) results indicated that the diffraction pattern observed for 2S8M samples at d-spacing of 4.20 and 3.79 Å was related to the characteristic peak of β' type crystals, which were responsible for the enhanced foaming capability of 2S8M oleogels. Oleophobic property of 2S8M increased, as indicated by wettability in oil phase, which could possibly drive crystals to the air-oil interface.

CONCLUSIONS

These results highlighted the importance of lipid crystal morphology in determining the whippability of oleogels. © 2021 Society of Chemical Industry.

The Potential Application of Pickering Multiple Emulsions in Food

Emulsions stabilized by adsorbed particles—Pickering particles (PPs) instead of surfactants and emulsifiers are called Pickering emulsions. Here, we review the possible uses of Pickering multiple emulsions (PMEs) in the food industry. Food-grade PMEs are very complex systems with high potential for application in food technology. They can be prepared by traditional two-step emulsification processes but also using complex techniques, e.g., microfluidic devices. Compared to those stabilized with an emulsifier, PMEs provide more benefits such as lower susceptibility to coalescence, possible encapsulation of functional compounds in PMEs or even PPs with controlled release, etc. Additionally, the PPs can be made from food-grade by-products. Naturally, w/o/w emulsions in the Pickering form can also provide benefits such as fat reduction by partial replacement of fat phase with internal water phase and encapsulation of sensitive compounds in the internal water phase. A possible advanced type of PMEs may be stabilized by Janus particles, which can change their physicochemical properties and control properties of the whole emulsion systems. These emulsions have big potential as biosensors. In this paper, recent advances in the application of PPs in food emulsions are highlighted with emphasis on the potential application in food-grade PMEs.

Pickering foams and parameters influencing their characteristics

Pickering foams are available in many applications and have been continually gaining interest in the last two decades. Pickering foams are multifaceted, and their characteristics are highly dependent on many factors, such as particle size, charge, hydrophobicity and concentration as well as the charge and concentration of surfactants and salts available in the system. A literature review of these individual studies at first might seem confusing and somewhat contradictory, particularly in multi-component systems with particles and surfactants with different charges in the presence of salts. This paper provides a comprehensive overview of particle-stabilized foams, also known as Pickering foams and froths. Underlying mechanisms of foam stabilization by particles with different morphology, surface chemistry, size and type are reviewed and clarified. This paper also outlines the role of salts and different factors such as pH, temperature and gas type on Pickering foams. Further, we highlight recent developments in Pickering foams in different applications such as food, mining, oil and gas, and wastewater treatment industries, where Pickering foams are abundant. We conclude this overview by presenting important research avenues based on the gaps identified here. The focus of this review is limited to Pickering foams of surfactants with added salts and does not include studies on polymers, proteins, or other macromolecules.

Optical Properties of Pickering Emulsions and Foams

A significant number of studies have been conducted on particle adhesion phenomena as pertaining to the oil-water interface of droplets and the air-liquid interface of bubbles, known as Pickering emulsions and Pickering foams, respectively. However, few of the literature reports have discussed the optical properties of these materials. In this study, the optical properties of Pickering particles were calculated by using an electromagnetic field analysis via a finite element method, and their optical responses are discussed. The changes in scattering due to the differences in the number of adhering particles and particle size are compared for three composition systems: an oil-in-water Pickering emulsion, a water-in-oil Pickering emulsion, and a Pickering foam. It was determined that changes in the amount of scattering are due to the mixing of the phases in the scattering field. This effect is more pronounced when the size of the scatterer is significantly smaller than the wavelength. For systems with particles larger than the wavelength, changes in the amount of scattering were suppressed because of destructive interference of the electromagnetic waves. This work revealed that the variation in the amount of scattering due to the constituent material and size of the Pickering particles is affected by two different factors, and the change in the amount of scattering is 10 times greater than in a uniformly dispersed system.

Effects of natural waxes on the interfacial behavior, structural properties and foam stabilization of aerated emulsions

Aerated emulsions have widespread applications in food industry. However, the poor stability of aerated emulsions remains a major challenge due to their inherent thermodynamic instability. Herein, a novel strategy to...

Recent progress in Pickering emulsions stabilised by bioderived particles

In recent years, the demand for non-surfactant based Pickering emulsions in many industrial applications has grown significantly because of the option to select biodegradable and sustainable materials with low toxicity as emulsion stabilisers. Usually, emulsions are a dispersion system, where synthetic surfactants or macromolecules stabilise two immiscible phases (typically water and oil phases) to prevent coalescence. However, synthetic surfactants are not always a suitable choice in some applications, especially in pharmaceuticals, food and cosmetics, due to toxicity and lack of compatibility and biodegradability. Therefore, this review reports recent literature (2018-2021) on the use of comparatively safer biodegradable polysaccharide particles, proteins, lipids and combinations of these species in various Pickering emulsion formulations. Also, an overview of the various tuneable factors associated with the functionalisation or surface modification of these solid particles, that govern the stability of the Pickering emulsions is provided.

Advantages and challenges of Pickering emulsions applied to bio-based films: a mini-review

The strategy of adding hydrophobic compounds to bio-based films (usually based on hydrophilic matrices), forming films containing emulsions, is a technique that has been used to improve some physical properties (such as reducing water solubility and water vapor permeability) and / or to impart properties, such as antioxidant and antimicrobial effects by carrying hydrophobic active components that would otherwise be insoluble in hydrophilic matrices. Although Pickering emulsions have been reported as presenting greater stability when compared with surfactant-stabilized emulsions, little is known about the drying stability of Pickering emulsions (which is important for film applications). Anyway, several studies have indicated that Pickering emulsions are interesting systems to improve the water vapor barrier properties of bio-based films and coatings, and to act as carriers of active hydrophobic components. On the other hand, the tensile properties of those films are usually impaired by the presence of Pickering emulsions. The objective of this review is to present recent developments and future perspectives in bio-based films loaded with Pickering emulsions. © 2020 Society of Chemical Industry.

Development of “New” Bread and Cheese

Bread and cheese have been a popular combination since early times. Indeed, the history of bread dates back to 8000 BC and that of cheese to 7200 BC. However, new types of breads and cheeses are increasingly popular for several reasons, such as allergies, lifestyles, economy and religion. The major challenge is that food manufacturers are offering new products most of which are not welcomed by consumers. Therefore, recently, researchers have placed importance on their relationships with consumers to boost the success of new products. This short review summarizes the backgrounds of recent trends, processes, and principles to manufacture new bread and cheese products, and discusses future perspectives. The development of additive-free, gluten-free rice bread we have recently done from basic research to commercialization of the products is highly focused in this review. Additionally, ongoing studies on plant-based cheeses are introduced from material selection to suggest future outlooks.

Food-Grade Pickering Emulsions: Preparation, Stabilization and Applications

In recent years, Pickering emulsions have emerged as a new method and have attracted much attention in the fields of food sciences. Unlike conventional emulsions, Pickering emulsions are stabilized by solid particles, which can irreversibly adsorb on the oil-water interface to form a dense film to prevent the aggregation of droplets. The research and development of food-grade solid particles are increasingly favored by scientific researchers. Compared with conventional emulsions, Pickering emulsions have many advantages, such as fewer using amounts of emulsifiers, biocompatibility and higher safety, which may offer feasibility to have broad application prospects in a wide range of fields. In this article, we review the preparation methods, stabilization mechanism, degradation of Pickering emulsions. We also summarize its applications in food sciences in recent years and discuss its future prospects and challenges in this work.