Emerging technologies to enhance starch performance

Tailoring the physicochemical properties of starch: impact of integrated ultrasonic and ethanol pretreatment on the oil uptake of infrared fried ginkgo seeds

BACKGROUND

The structural changes of starch would have a more crucial impact on oil absorption and quality changes in starch-rich fruits and vegetables during frying process with enhanced heat transfer (such as infrared frying). In the present study, the influence of integrated ultrasonic and ethanol (US + ethanol) pretreatment on oil uptake in infrared fried (IF) ginkgo seeds was evaluated regarding modifications in the physicochemical properties of starch. The pretreatment was performed with ultrasonic (40 kHz, 300 W) and ethanol osmotic (95%, v/v) treatment individually or integrated for 40 min.

RESULTS

The mass transfer in the pretreatment was facilitated by combined ultrasound and ethanol. The swelling power, solubility, and gelatinization degree of starch was significantly increased. Low-frequency-NMR curves and images revealed that the bound water fraction in ginkgo seeds was increased and the water distribution was homogenized. The results of Fourier transform-infrared spectrum and differential scanning calorimeter revealed that the crystalline regions of starch were reduced and the thermal enthalpy was decreased after US + ethanol pretreatment. The total, surface and structural oil content in IF ginkgo seeds with US + ethanol pretreatment was reduced by 29.10%, 34.52% and 29.73%, respectively. The US + ethanol pretreatment led to a thinner crust layer with increased porosity and smaller-sized pores in the IF ginkgo seeds as observed by stereo microscopy and scanning electron microscopy.

CONCLUSION

The changes in structural and physicochemical properties of starch by combined ultrasound and ethanol affect the crust ratio and pore characteristics in fried high-starch fruits and vegetables, thereby reducing oil absorption. © 2024 Society of Chemical Industry.

Effect of dielectric barrier discharge (DBD) plasma treatment on physicochemical and 3D printing properties of wheat starch

In recent years, the focus has shifted towards carbohydrate-based hydrogels and their eco-friendly preparation methods. This study involved an investigation into the treatment of wheat starch using dielectric barrier discharge (DBD) plasma technology over varying time gradients (0, 2, 5, 10, 15, and 20 min). The objective was to systematically examine the impact of different treatment durations on the physicochemical properties of wheat starch and the suitability of its gels for 3D printing. Morphology of wheat starch remained intact after DBD treatment. However, it led to a reduction in the amylose content, molecular weight, and crystallinity. This subsequently resulted in a decrease in the pasting temperature and viscosity. Moreover, the gels of the DBD-treated starch exhibited superior 3D printing performance. After a 2-min DBD treatment, the 3D printed samples of the wheat starch gel showed no significant improvements, as broken bars were evident on the surface of the 3D printed graphic, whereas DBD-20 showed better printing accuracy and surface structure, compared to the original starch without slumping. These results suggested that DBD technology holds potential for developing new starch-based gels with impressive 3D printing properties.

Enhancing starch functionality through synergistic modification via sequential treatments with cold plasma and electron beam irradiation

The impact of dual sequential modifications using radio-frequency (RF) plasma and electron beam irradiation (EBI) on starch properties was investigated and compared with single treatments within an irradiation dose range of 5-20 kGy. Regardless of sequence, dual treatments synergistically affected starch properties, increasing acidity, solubility, and paste clarity, while decreasing rheological features with increasing irradiation dose. The molecular weight distribution was also synergistically influenced. Amylopectin distribution broadened particularly below 10 kGy. Amylose narrowed its distribution across all irradiation doses. This was due to dominating EBI-induced degradation and molecular rearrangements from RF plasma. With the highest average radiation-chemical yield (G) and degradation rate constant (k) of (2.12 ± 0.14) × 10-6 mol·J-1 and (3.43 ± 0.23) × 10-4 kGy-1, respectively, upon RF plasma pre-treatment, amylose underwent random chain scission. In comparison to single treatments, dual modification caused minor alterations in spectral characteristics and crystal short-range order structure, along with increased granule aggregation and surface irregularities. The synergistic effect was dose-dependent, significant up to 10 kGy, irrespective of treatment sequence. The highest synergistic ratio was observed when RF plasma preceded irradiation, demonstrating the superior efficiency of plasma pre-treatment in combination with EBI. This synergy has the potential to lower costs and extend starch's technological uses by enhancing radiation sensitivity and reducing the irradiation dose.

Effect of atmospheric pressure plasma jet on the structure and physicochemical properties of wheat starch

The effect of atmospheric pressure plasma jet (APPJ) with different discharge power (0, 400, 600, and 800 W) on the structure and physicochemical properties of wheat starch were evaluated in this study. After APPJ treatments, significant declines in peak viscosity, breakdown viscosity, and final viscosity of wheat starch pasting parameters were observed with increase of plasma treatment power. Being treated with discharge power of 800 W, the PV and BD value of wheat starch paste significantly dropped to 2,578 and 331 cP, respectively. Apparently, APPJ could raise the solubility of wheat starch, while reduce the swelling capacity, and also lower the G' and G″ value of wheat starch gel. Roughness and apparent scratch was observed on the surface of the treated wheat starch granules. Although APPJ treatment did not alter wheat starch's crystallization type, it abated the relative crystallinity. APPJ treatment might be useful in producing modified wheat starch with lower viscosity and higher solubility.

Impact of long-term ultrasound treatment on structural and physicochemical properties of starches differing in granule size

Granule size is a critical parameter affecting starch processing properties. Ultrasound treatments of up to 22 h were applied on two starches differing in granule size (quinoa starch and maize starch). The two starches showed significantly different trends in both structural and physicochemical aspects affected by the ultrasound treatments. For the small granule starch (volume-weighted mean particle size of 1.79 μm), short-term ultrasonication caused an increase of swelling power. As the treatment time increased, the physicochemical properties were influenced by the degradation of amylopectin external chains. The X-ray diffraction results showed a decrease of relative crystallinity and changes of peak areas with long-term treatment. On the other hand, a balance between amylose leaching and surface damages was seen for the large granule starch (volume-weighted mean particle size of 18.3 μm). The effect of ultrasound modification on starches with different molecular and granular structures was discussed. A possible mechanism of the ultrasound effect was proposed.

Plasma Effects on Properties and Structure of Corn Starch: Characterization and Analysis

This research investigated the impact of air plasma and high-pressure plasma treatments on corn starch. The resulting samples were characterized by particle morphology, molecular polymerization degree, molecular functional groups, and crystallinity. SEM analysis revealed that plasma treatment altered the surface morphology of corn starch, with variations observed depending on the duration of treatment. UV/Vis spectroscopy results indicated that longer plasma exposure times increased maximum absorbance values with less complete peak shapes. FTIR results demonstrated that plasma treatment disrupted the crystalline structure of starch, resulting in decreased molecular polymerization. Lastly, XRD results showed a proportional relationship between plasma treatment duration and the intensity of the diffuse peak, indicating that prolonged plasma exposure increased the amorphous nature of starch.

-

Thermal processing remains the key processing technology for food products. However, there are some limitations for thermal processing such as loss of sensory and nutritional quality. Furthermore, nowadays consumers are looking forward for fresh like products which are free from chemical preservatives, yet having longer shelf life. Thus, alternative processing techniques are gaining popularity among food processors to replace conventional thermal processing keeping nutritional quality, sensory attributes and food safety in mind. The alternative processing techniques such as ultrasound, gamma irradiation, high pressure processing and microwave treatment causes several modifications (structural changes, effects on swelling and solubility index, gelatinization behaviour, pasting or rheological properties, retrogradation and cooking time) in physicochemical and functional properties of pulse starches which offers several advantages from commercial point of view. This review aims to summarize the effect of different alternative processing techniques on the structure, solubility, gelatinization, retrogradation and pasting properties of various pulse starches.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05557-3.

A review of green methods used in starch-polyphenol interactions: physicochemical and digestion aspects

The interactions of starch with lipids, proteins, and other major food components during food processing are inevitable. These interactions could result in the formation of V-type or non-V-type complexes of starch. The starch-lipid complexes have been intensively studied for over five decades, however, the complexes of starch and polyphenols are relatively less studied and are the subject of recent interest. The interactions of starch with polyphenols can affect the physicochemical properties and its digestibility. The literature has highlighted several green methods such as ultrasound, microwave, high pressure, extrusion, ball-milling, cold plasma etc., to assist interactions of starch with polyphenols. However, comprehensive information on green methods to induce starch-polyphenol interactions is still scarce. Therefore, in light of the importance and potential of starch-polyphenol complexes in developing functional foods with low digestion, this review has summarized the novel green methods employed in interactions of starch with flavonoids, phenolic acids and tannins. It has been speculated that flavonoids, phenolic acids, and tannins, among other types of polyphenols, may have anti-digestive activities and are also revealed for their interaction with starch to form either an inclusion or non-inclusion complex. Further information on the effects of these interactions on physicochemical parameters to understand the chemistry and structure of the complexes is also provided.

Recent Advances in Acoustic Technology in Food Processing

The development of food industry technologies and increasing the sustainability and effectiveness of processing comprise some of the relevant objectives of EU policy. Furthermore, advances in the development of innovative non-thermal technologies can meet consumers' demand for high-quality, safe, nutritious, and minimally processed foods. Acoustic technology is characterized as environmentally friendly and is considered an alternative method due to its sustainability and economic efficiency. This technology provides advantages such as the intensification of processes, increasing the efficiency of processes and eliminating inefficient ones, improving product quality, maintaining the product's texture, organoleptic properties, and nutritional value, and ensuring the microbiological safety of the product. This review summarizes some important applications of acoustic technology in food processing, from monitoring the safety of raw materials and products, intensifying bioprocesses, increasing the effectiveness of the extraction of valuable food components, modifying food polymers' texture and technological properties, to developing biodegradable biopolymer-based composites and materials for food packaging, along with the advantages and challenges of this technology.

Starches modification with rose polyphenols under multi-frequency power ultrasonic fields: Effect on physicochemical properties and digestion behavior

As the main source of energy for human beings, starch is widely present in people's daily diet. However, due to its high content of rapidly digestive starch, it can cause a rapid increase in blood glucose after consumption, which is harmful to the human body. In the current study, the complexes made from edible rose polyphenols (ERPs) and three starches (corn, potato and pea) with different typical crystalline were prepared separately by multi-frequency power ultrasound (MFPU). The MFPU includes single-frequency modes of 40, 60 kHz and dual-frequency of 40 and 60 kHz in sequential and simultaneous mode. The results of the amount of complexes showed that ultrasound could promote the formation of polyphenol-starch complexes for all the three starches and the amount of ERPs in complexes depended on the ultrasonic parameters including treatment power, time and frequency. Infrared spectroscopy and X-ray diffraction indicated that ERPs with or without ultrasound could interact with the three starches through non-covalent bonds to form non-V-type complexes. Scanning electron microscopy showed that the shape of starches changed obviously from round/oval to angular and the surface of the starches were no longer smooth and appeared obvious pits, indicating that the ultrasonic field destroyed the structure of starches. In addition, compared to the control group, the in vitro digestibility study with 40/60 kHz sonication revealed that ultrasonic treatment greatly improved the digestive properties of the polyphenol-starch complexes by significantly increasing the content of resistant starch (20.31%, 17.27% and 14.98%) in the three starches. Furthermore, the viscosity properties of the three starches were all decreased after ERPs addition and the effect was enhanced by ultrasound both for single- and dual-frequency. In conclusion, ultrasound can be used as an effective method for preparing ERPs-starch complexes to develop high value-added products and low glycemic index (GI) foods.

Effect of ultrasound-microwave and microwave-ultrasound treatment on physicochemical properties of corn starch

Natural starch is an agricultural sourced biopolymer being low cost, biodegradable, high efficiently, renewable and easy available. Despite these advantages, phisochemical properties of native starch are limited for most industrial applications and must be modified. Ultrasound and microwave treatment have been widely applied separately for starch modification. Ultrasound treatment, with high efficiency and low cost, and microwave treatment, which produces homogeneous and high quality products, are short proceesing time technologies that can be used together to change the structure and properties of starches obtained from various plants. In this study the effects of ultrasound and microwave combined treatment on the physicochemical properties of natural corn starch were investigated. Corn starch was irritated using different combination of ultrasound-microwave and microwave-ultrasound treatment; using 90, 180, 360 and 600 W microwave power during 1, 2, 3 min, and using ultrasound at 35 °C constant temperature for 20, 30, 40 min. The structural changes of modified corn starches were determined by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) analyses. Nowadays, many physical methods are used for starch modification, but limited studies were on ultrasound-microwave and microwave-ultrasound combined treatment method. As a result of this study, it was observed that ultrasound and microwave combination is an efficient, fast and environmentally friendly method for natural corn starch modification.

Biopolymers as green-based food packaging materials: A focus on modified and unmodified starch-based films

The ideal food packaging materials are recyclable, biodegradable, and compostable. Starch from plant sources, such as tubers, legumes, cereals, and agro-industrial plant residues, is considered one of the most suitable biopolymers for producing biodegradable films due to its natural abundance and low cost. The chemical modification of starch makes it possible to produce films with better technological properties by changing the functional groups into starch. Using biopolymers extracted from agro-industrial waste can add value to a raw material that would otherwise be discarded. The recent COVID-19 pandemic has driven a rise in demand for single-use plastics, intensifying pressure on this already out-of-control issue. This review provides an overview of biopolymers, with a particular focus on starch, to develop sustainable materials for food packaging. This study summarizes the methods and provides a potential approach to starch modification for improving the mechanical and barrier properties of starch-based films. This review also updates some trends pointed out by the food packaging sector in the last years, considering the impacts of the COVID-19 pandemic. Perspectives to achieve more sustainable food packaging toward a more circular economy are drawn.

Starches in the encapsulation of plant active ingredients: state of the art and research trends

As a natural polymer, starches and their derivatives have received widespread attention in the cosmetic and pharmaceutical industries, particularly for their use as a coating material. In this sense, as an encapsulating agent, starches stand out, considering the number of compounds that they can trap. Additionally, they provide a nutritional contribution and may improve acceptance by patients. As such, this type of material may serve as an alternative to overcome gaps such as loss of activity of the active principles, low assimilation, or deterioration under environmental and physiological conditions. In this paper, we aim to present the state of the art and research trends on the use of starch as a wall material for the encapsulation of active principles of plant origin. It was found that the most-encapsulated active principles are essential oils and polyphenols; native or modified starches are typically used, either as the sole wall material or in combination with other polymers; and the most widely used methodology is spray drying. The reviewed studies indicate the potential of starches for their use in active ingredient encapsulation processes, improving their viability and expanding their range of applications in different industries, as well as showing a clearly increasing publication trend over the last 10 years.

Graphical abstract

Ultrasound-Assisted Extraction of Mango (Mangifera indica) Kernel Starch: Chemical, Techno-Functional, and Pasting Properties

(1) Background: Starch is the main component of mango (Mangifera indica) kernel, making it an alternative to obtain an ingredient from a non-conventional source with potential application in food and other industrial applications; however, reports on the use of new extraction techniques for this material are scarce. The main objective of this research was to evaluate the effect of ultrasound-assisted extraction (UAE) on the yield, chemical, techno-functional, rheological, and pasting properties of starch isolated from a non-conventional source such as a mango kernel. (2) Methods: Different power sonication conditions (120, 300, and 480 W) and sonication time (10, 20, and 30 min) were evaluated along with a control treatment (extracted by the wet milling method). (3) Results: Ultrasound-assisted extraction increases starch yield, with the highest values (54%) at 480 W and 20 min. A significant increase in the amylose content, water-holding capacity, oil-holding capacity, solubility, and swelling power of ultrasonically extracted starches was observed. Similarly, mango kernel starch (MKS) exhibited interesting antioxidant properties. The sol-gel transition temperature and pasting parameters, such as the breakdown viscosity (BD) and the setback viscosity (SB), decreased with ultrasound application; (4) Conclusion: indicating that ultrasound caused changes in physical, chemical, techno-functional, rheological, and pasting properties, depending on the power and time of sonication, so it can be used as an alternative starch extraction and modification technique, for example, for potential application in thermally processed food products such as baked goods, canned foods, and frozen foods.

EFFECTS OF COLD PLASMA ON CHLOROPHYLLS, CAROTENOIDS, ANTHOCYANINS, AND BETALAINS

Plasma is considered by several researchers to be the fourth state of matter. Cold plasma has been highlighted as an alternative to thermal treatments because heat induces less degradation of thermolabile bioactive compounds, such as natural pigments. In this review, we provide a compilation of the current information about the effects of cold plasma on natural pigments, such as the changes caused by plasma to the molecules of chlorophylls, carotenoids, anthocyanins, and betalains. As a result of the literature review, it is noted that can degrade cell membrane and promote damage to pigment storage sites; thereby releasing pigments and increasing their content in the extracellular space. However, the reactive species contained in the cold plasma can cause degradation of the pigments. Cold plasma is a promising technology for extracting pigments; however, case-by-case optimization of the extraction process is required.

Physical, Chemical and Biochemical Modification Approaches of Potato (Peel) Constituents for Bio-Based Food Packaging Concepts: A Review

Potatoes are grown in large quantities and are mainly used as food or animal feed. Potato processing generates a large amount of side streams, which are currently low value by-products of the potato processing industry. The utilization of the potato peel side stream and other potato residues is also becoming increasingly important from a sustainability point of view. Individual constituents of potato peel or complete potato tubers can for instance be used for application in other products such as bio-based food packaging. Prior using constituents for specific applications, their properties and characteristics need to be known and understood. This article extensively reviews the scientific literature about physical, chemical, and biochemical modification of potato constituents. Besides short explanations about the modification techniques, extensive summaries of the results from scientific articles are outlined focusing on the main constituents of potatoes, namely potato starch and potato protein. The effects of the different modification techniques are qualitatively interpreted in tables to obtain a condensed overview about the influence of different modification techniques on the potato constituents. Overall, this article provides an up-to-date and comprehensive overview of the possibilities and implications of modifying potato components for potential further valorization in, e.g., bio-based food packaging.

Optimization of the Sustainable Production of Resistant Starch in Rice Bran and Evaluation of Its Physicochemical and Technological Properties

In this study, the optimization of ultrasound (US) (850 kHz, 120 W) processing parameters (temperature, time, and power) for the enhanced production of resistant starch (RS) in rice bran (RB) matrixes was performed. The effect of US cavitation at different temperatures on the morphology, physicochemical properties, and mechanical performance of RS was evaluated. Ultrasonication at 40−70 °C temperatures affected the chemical structure, reduced the crystallinity of RS from 23.85% to between 18.37 and 4.43%, and increased the mechanical and thermal stability of RS pastes, indicating a higher tendency to retrograde. US treatment significantly (p < 0.05) improved the oil (OAC) and water (WAC) absorption capacities, swelling power (SP), solubility (WS), and reduced the least-gelation concentration (LGC). The mathematical evaluation of the data indicated a significant effect (p < 0.05) of the US parameters on the production of RS. The largest increment of RS (13.46 g/100 g dw) was achieved with US cavitation at 1.8 W/cm2 power, 40.2 °C temperature, and 18 min of processing time. The developed method and technology bring low-temperature US processing of rice milling waste to create a new sustainable food system based on modified rice bran biopolymers.

Native and fermented waxy cassava starch as a novel gluten-free and clean label ingredient for baking and expanded product development

Amylose-free and wild-type cassava starches were fermented for up to 30 days and oven- or sun-dried. The specific volume (ν) after baking was measured in native and fermented starches. The average ν (across treatments) for waxy starch was 3.5 times higher than that in wild-type starches (17.6 vs. 4.8 cm³ g^-1). The best wild-type starch (obtained after fermentation and sun-drying) had considerably poorer breadmaking potential than native waxy cassava (8.4 vs. 16.4 cm³ g^-1, respectively). The best results were generally obtained through the synergistic combination of fermentation (for about 10-14 days) and sun-drying. Fermentation reduced viscosities and the weight average molar mass led to denser macromolecules and increased branching degree, which are linked to a high loaf volume. The absence of amylose, however, was shown to be a main determinant as well. Native waxy starch (neutral in taste, gluten-free, and considerably less expensive than the current alternatives to cassava) could become a new ingredient for the formulation of clean label-baked or fried expanded products.

Dual Modification of Starch by Physical Methods Based on Corona Electrical Discharge and Ionizing Radiation: Synergistic Impact on Rheological Behavior

The present paper focuses on evaluating the synergistic effects of dual modification with corona electric discharge (CED) and electron beam irradiation (EBI) on the rheological behavior of starch. Combined treatments were applied successively (CED/EBI and EBI/CED) and compared with single treatments. The outcomes showed that the rheological features of starch were altered by the dual modification in correlation with the irradiation dose mainly as a result of radiation-induced degradation. Decreases in apparent viscosity were described by exponential-like-models according to the order of application of the treatment sequences. The mathematical models allowed the estimation of the irradiation doses for which the viscosity decreased by e times for the dual modified starches (3.3 ± 1.3 kGy for CED/EBI and 5.6 ± 0.5 kGy for EBI/CED, respectively) and the fraction (f) of 0.47 ± 0.10 corresponding to starch granule considered to be affected by plasma. Both dual treatments yielded a synergistic effect, regardless of the order of application of the treatment sequences, being more effective in decreasing starch apparent viscosity than single EBI. However, synergism evaluation proved that the use of plasma as a pre-treatment to irradiation processing could provide benefits up to 20 kGy. These findings support the practical goals of technologists with valuable information that may facilitate or simplify the experimental design of starch dual modification with plasma and ionizing radiation.

Holistic View of Starch Chemistry, Structure and Functionality in Dry Heat-Treated Whole Wheat Kernels and Flour

Heat treatment is used as a pre-processing step to beneficially change the starch properties of wheat flour to enhance its utilisation in the food industry. Heat-treated wheat flour may provide improved eating qualities in final wheat-based products since flour properties predominantly determine the texture and mouthfeel. Dry heat treatment of wheat kernels or milled wheat products involves heat transfer through means of air, a fluidising medium, or radiation—often resulting in moisture loss. Heat treatment leads to changes in the chemical, structural and functional properties of starch in wheat flour by inducing starch damage, altering its molecular order (which influences its crystallinity), pasting properties as well as its retrogradation and staling behaviour. Heat treatment also induces changes in gluten proteins, which may alter the rheological properties of wheat flour. Understanding the relationship between heat transfer, the thermal properties of wheat and the functionality of the resultant flour is of critical importance to obtain the desired extent of alteration of wheat starch properties and enhanced utilisation of the flour. This review paper introduces dry heat treatment methods followed by a critical review of the latest published research on heat-induced changes observed in wheat flour starch chemistry, structure and functionality.

Gamma radiation as a modifier of starch – Physicochemical perspective

Starch is one of the most common and abundantly found carbohydrates in cereals, roots, legumes, and some fruits. It is a tasteless, colorless, and odorless source of energy that is present in the amyloplasts of plants. Native starch comprises amylose, a linear α-glucan having α-1,4-linkage and amylopectin, a branched polysaccharide with both α-1,4-linkage and α-1,6-linkage. Due to the low solubility, high viscosity, and unstable pasting property of native starch, it has been restricted from its application in industries. Although native starch has been widely used in various industries, modification of the same by various chemical, enzymatic and physical methods have been carried out to alter its properties for better performance in several industrial aspects. Physical modification like gamma radiation is frequently used as it is rapid, penetrates deeper, less toxic, and cost-effective. Starch when irradiated with gamma rays is observed to produce free radicals, generate sugars owing to cleavage of amylopectin branches, and exhibit variation in enzymatic digestion, amylose content, morphology, crystallinity, thermal property, and chemical composition. These physicochemical properties of the starch due to gamma radiation are assessed using optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and its application are discussed.

•

Assessment and comparison of morphological features of native and gamma-irradiated starch.

•

Investigation of crystallinity and structural type of crystalline domains through XRD.

•

FTIR spectroscopy confirmed the changes in chemical composition of gamma-irradiated and native starch.

•

DSC analysis revealed the changes in gelatinization temperature of gamma-irradiated and native starch.

Dual-process of starch modification: Combining ozone and dry heating treatments to modify cassava starch structure and functionality

This work evaluated for the first time the effect of dual modification of cassava starch by using ozone (O₃) and dry heating treatment (DHT). The dual modification was capable to promote fissures on the surface of the starch granule (DHT + O₃), affected the starch amorphous domains, presented greater degree of starch oxidation (DHT + O₃) and different profiles of starch molecular size distribution. These modifications resulted in starches with different properties. Moreover, the sequence of treatments was decisive for the hydrogel properties: while DHT + O₃ resulted in formation of stronger gels, O₃ + DHT resulted in weaker gels. In conclusion, this proposed dual modification was capable to produce specific modified starch when compared with the isolated treatments, also expanding the potential of cassava starch applications.