Adhesion force spectroscopy of model surfaces with wettability gradient

Droplet Spreading and Adhesion on Spherical Surfaces

Adhesion of a liquid droplet to a solid surface is a result of solid surface interactions with surrounding fluids, affected by its wettability and morphology. Unfortunately, the direct measurements of adhesion forces are rarely reported in the scientific literature, especially for solids with curvatures. In this study, by using a high-sensitivity microelectronic mechanical balance which vertically deposits and then pulls liquid droplets, the spreading and adhesion forces for water and ethylene glycol droplets on spherical surfaces of polyethylene terephthalate (PET) with radii of curvature from 2 to 8 mm were recorded. Results show that the surface curvature does not affect the advancing and most-stable contact angles but affects the extent of spreading and maximum adhesion forces. The solid surface curvature affects both surface tension and Laplace pressure forces at the spreading point, whereas it mainly affects the Laplace pressure force at the maximum adhesion point.

A digital microfluidic platform based on a near-infrared light-responsive shape-memory micropillar array

In this work, we developed a digital microfluidic platform based on a shape memory micropillar array responsive to near-infrared light, and the droplets were programmatically manipulated through light-induced micropillar deformation. The micropillar array was constructed on the surface of a poly(ethylene-vinyl acetate) copolymer, a shape memory polymer sensitive to near-infrared light. Before droplet manipulation, the micropillar array was kept temporarily tilted by heating and pressing. Under the irradiation of a near-infrared laser, the micropillar array achieved the transition from the temporary shape to the original shape. Temperature gradient and micropillar deformation caused by near-infrared light irradiation produce the driving force for droplet movement. The movement of the laser mounted on an electronically controlled displacement platform was controlled by a computer to achieve the programmed control of the droplets. Moreover, we demonstrated light-manipulated droplet movement and fusion, and achieved ascorbic acid detection using this digital microfluidic platform. In particular, the micropillar array chip is able to manipulate droplets in a wide range of 0.1 μL to 10 μL. The proposed digital microfluidic platform will broaden the application of digital microfluidic technology in analytical chemistry and biomedicine.

Nanoadhesion on rigid methyl-terminated biphenyl thiol monolayers: a high-rate dynamic force spectroscopy study

Nanoadhesion on a self-assembled monolayer of 4-methyl-4'-mercaptobiphenyl is measured using a modified atomic force microscope. The dependence of the adhesion force on the loading rate is analyzed with the Dudko-Hummer-Szabo model, and the kinetic and interaction potential parameters for a single terminal group are extracted. The energy and location of the activation barrier suggest that the adhesion is dominated by van der Waals dispersion forces. The humidity effect on the nanoadhesion is also studied. The results are compared with previously measured values for methyl-terminated alkane thiols and the influence of the thiol rigidity on the adhesion force is discussed.

Tribological properties of self-assembled monolayers of catecholic imidazolium and the spin-coated films of ionic liquids

A novel compound of an imidazolium type of ionic liquid (IL) containing a biomimetic catecholic functional group normally seen in mussel adhesive proteins was synthesized. The IL can be immobilized on a silicon surface and a variety of other engineering material surfaces via the catecholic anchor, allowing the tribological protection of these substrates for engineering applications. The surface wetting and adhesive properties and the tribological property of the synthesized self-assembled monolayers (SAMs) are successfully modulated by altering the counteranions. The chemical composition and wettability of the IL SAMs were characterized by means of X-ray photoelectron spectroscopy (XPS) and contact angle (CA) measurements. The adhesive and friction forces were measured with an atomic force microscope (AFM) on the nanometer scale. IL composite films were prepared by spin coating thin IL films on top of the SAMs. The macrotribological properties of these IL composite films were investigated with a pin-on-disk tribometer. The results indicate that the presence of IL SAMs on a surface can improve the wettability of spin-coated ionic liquids and thus the film quality and the tribological properties. These films registered a reduced friction coefficient and a significantly enhanced durability and load-carrying capacity. The tribological properties of the composite films are better than those of pure IL films because the presence of the monolayers improves the adhesion and compatibility of spin-coated IL films with substrates.