Size-controlled fabrication of gold nanodome arrays and its application to enzyme electrodes

Precise tailoring of evaporated gold nanocones using electron beam lithography and lift-off

The ability to fabricate nanocones with precise dimensions is essential for several emerging applications. We demonstrate here a method which can be used to fabricate arrays of gold nanocones with high dimensional precision using lithographic and lift-off means. electron beam (ebeam) writing of a spin-coated PMMA-based bilayer resist deposited onto silicon wafers is used to form a shadow mask. This mask gradually closes as the deposition of gold (using ebeam evaporation) proceeds-the result is arrays of gold nanocones on the silicon wafer surface after lift-off of the resist. Observations using scanning electron microscopy enable a statistical study of the dimensions of 360 gold nanocones-the results demonstrate the high precision of the nanocones dimensions. The fabrication process enables the creation of arrays of nanocones with a base diameter varying from 53.6 ± 2.1 nm to 94.1 ± 2.4 nm, a vertical height ranging from 71.3 ± 4.1 nm to 153.4 ± 3.4 nm, and an apex radius of curvature ranging from 8.4 ± 1.2 nm to 11.6 ± 1.5 nm. The results are compared with the predictions of a deposition model which considers the evolving shadow masking during the gold deposition to compute the nanocone profile.

Biosensing Surfaces Based on Quantum Dots Array

The fabrication of self-ordered semiconductor (TiO2) and noble metal (Au) QDs arrays was successfully achieved by advanced nonlithographic template based method, namely using nanoporous alumina template. The emphasis was placed on the successful preparation of QDs arrays with the desired size, homogeneous distribution and optical (especially fluorescence) properties. Titania and gold QDs characterization by SEM, EDX and fluorescence spectroscopy was performed in order to verify their surface topography, chemical composition and emission properties in UV/VIS range of spectra, respectively. The surface biofunctionalization of QDs was realized via simple physical adsorption of glutathione tripeptide, which makes these arrays suitable for potential biosensing application, mainly in optical and electrochemical detection of biomoleculesin vitro.

Sustained frictional instabilities on nanodomed surfaces: stick-slip amplitude coefficient

Understanding the frictional properties of nanostructured surfaces is important because of their increasing application in modern miniaturized devices. In this work, lateral force microscopy was used to study the frictional properties between an AFM nanotip and surfaces bearing well-defined nanodomes comprising densely packed prolate spheroids, of diameters ranging from tens to hundreds of nanometers. Our results show that the average lateral force varied linearly with applied load, as described by Amontons' first law of friction, although no direct correlation between the sample topographic properties and their measured friction coefficients was identified. Furthermore, all the nanodomed textures exhibited pronounced oscillations in the shear traces, similar to the classic stick-slip behavior, under all the shear velocities and load regimes studied. That is, the nanotextured topography led to sustained frictional instabilities, effectively with no contact frictional sliding. The amplitude of the stick-slip oscillations, σf, was found to correlate with the topographic properties of the surfaces and scale linearly with the applied load. In line with the friction coefficient, we define the slope of this linear plot as the stick-slip amplitude coefficient (SSAC). We suggest that such stick-slip behaviors are characteristics of surfaces with nanotextures and that such local frictional instabilities have important implications to surface damage and wear. We thus propose that the shear characteristics of the nanodomed surfaces cannot be fully described by the framework of Amontons' laws of friction and that additional parameters (e.g., σf and SSAC) are required, when their friction, lubrication, and wear properties are important considerations in related nanodevices.