Surface-hydrophilic and protein-resistant tris(trimethylsiloxy)-3-methacryloxypropylsilane-containing polymer by the introduction of phosphorylcholine groups

Ophthalmic Hydrogel Contact Lens Material Containing Magnesium Oxide Nanoparticles and 3-(Trifluoromethyl)styrene for Biomedical Application

This research was conducted for the synthesis and application of ophthalmic lens materials with improved oxygen permeability and durability. Polyvinylpyrrolidone (PVP), N-vinyl-2-pyrrolidone (NVP), 3-(trifluoromethyl)styrene (3-TFMSt), and magnesium oxide nanoparticles were used as additives for the basic combination of 2-hydroxyethyl methacrylate (HEMA). Additionally, the materials were copolymerized with ethylene glycol dimethacrylate (EGDMA) as the cross-linking agent and azobisisobutyronitrile (AIBN) as the initiator. The addition of magnesium oxide nanoparticles was found to increase the tensile strength from 0.0631 to 0.0842 kgf/mm². Copolymerization with a small amount of 3-TFMSt of about 1% increased the tensile strength to 0.1506 kgf/mm² and the oxygen permeability from 6.00 to 9.64 (cm²/s)∙(mLO₂/mL·mmHg)∙10^-11. The contact lens material produced using N-vinyl-2-pyrrolidone and magnesium oxide nanoparticles as additives satisfied the basic physical properties required for hydrogel contact lenses and is expected to be used usefully as a material for fabricating high-performance hydrogel lenses.

Recent progress and perspectives in applications of 2-methacryloyloxyethyl phosphorylcholine polymers in biodevices at small scales

Bioinspired materials have attracted attention in a wide range of fields. Among these materials, a polymer family containing 2-methacryloyloxyethyl phosphorylcholine (MPC), which has a zwitterionic phosphorylcholine headgroup inspired by the...

Pharmaceutical-loaded contact lenses as an ocular drug delivery system: A review of critical lens characterization methodologies with reference to ISO standards

Therapeutic contact lenses for ocular drug delivery have received considerable interest as they can potentially enhance ocular bioavailability, increase patient compliance, and reduce side effects. Along with the successful in vitro and in vivo studies on sustained drug delivery through contact lenses, lens critical properties such as water content, optical transparency and modulus have also been investigated. Aside from issues such as drug stability or burst release, the potential for the commercialization of pharmaceutical-loaded lenses can be limited by the alteration of lens physical and chemical properties upon the incorporation of therapeutic or non-therapeutic components. This review outlines advances in the use of pharmaceutical-loaded contact lenses and their relevant characterization methodologies as a potential ocular drug delivery system from 2010 to 2020, while summarizing current gaps and challenges in this field. A key reference point for this review is the relevant ISO standards on contact lenses, relating to the associated characterization methodologies. The content of this review is categorized based on the chemical, physical and mechanical properties of the loaded lens with the shortcomings of such analytical technologies examined.

Resveratrol-Loaded Hydrogel Contact Lenses with Antioxidant and Antibiofilm Performance

Contact lenses (CLs) are prone to biofilm formation, which may cause severe ocular infections. Since the use of antibiotics is associated with resistance concerns, here, two alternative strategies were evaluated to endow CLs with antibiofilm features: copolymerization with the antifouling monomer 2-methacryloyloxyethyl phosphorylcholine (MPC) and loading of the antioxidant resveratrol with known antibacterial activity. MPC has, so far, been used to increase water retention on the CL surface (Proclear^® 1 day CLs). Both poly(hydroxyethyl methacrylate) (HEMA) and silicone hydrogels were prepared with MPC covering a wide range of concentrations (from 0 to 101 mM). All hydrogels showed physical properties adequate for CLs and successfully passed the hen’s egg-chorioallantoic membrane (HET-CAM) test. Silicone hydrogels had stronger affinity for resveratrol, with higher loading and a slower release rate. Ex vivo cornea and sclera permeability tests revealed that resveratrol released from the hydrogels readily accumulated in both tissues but did not cross through. The antibiofilm tests against Pseudomonas aeruginosa and Staphylococcus aureus evidenced that, in general, resveratrol decreased biofilm formation, which correlated with its concentration-dependent antibacterial capability. Preferential adsorption of lysozyme, compared to albumin, might also contribute to the antimicrobial activity. In addition, importantly, the loading of resveratrol in the hydrogels preserved the antioxidant activity, even against photodegradation. Overall, the designed hydrogels can host therapeutically relevant amounts of resveratrol to be sustainedly released on the eye, providing antibiofilm and antioxidant performance.

Preparation of a photo- and thermo-responsive topological gel from anthracene-modified polyrotaxanes

A topological gel was formed from anthracene-modified polyrotaxanes (An-PRs) under UV irradiation, and the gel can turn back to a sol under thermal treatment due to the dimerization between the anthracene units and the dissociation of the formed dimer.

The effect of albumin and cholesterol on the biotribological behavior of hydrogels for contact lenses

The irritation/discomfort associated with the use of contact lenses (CLs) is often related to the eyelid-lens friction. Although the use of such devices is widespread, the information about the influence of the lacrimal fluid biomolecules on the tribological behavior of the CLs hydrogels is scarce. In this work, we investigated the effect of the presence of albumin and cholesterol in the lubricant medium, on the frictional response of two model hydrogels for CLs: a hydroxyethylmethacrylate based hydrogel, HEMA/PVP, and a silicone based one, TRIS/NVP/HEMA. Tribological experiments were done in a nanotribometer, in water and in the presence of solutions of those biomolecules. It was observed a significant increase of the friction coefficient (μ) for HEMA/PVP when the lubricant contains cholesterol, and for TRIS/NVP/HEMA when it contains albumin. Solid-state NMR and DSC analysis revealed that HEMA/PVP hydrated in cholesterol solution has a lower amount of free and loosely bound water than the hydrogel hydrated in water. Therefore, a smaller amount of water shall be released into the contact region during the friction tests with cholesterol solution, leading to a thinner film in the contact zone, and consequently to a higher μ. Concerning TRIS/NVP/HEMA, QCM-D studies showed that this hydrogel adsorbs less albumin than HEMA/PVP and that the formed film is more rigid, which can explain the increase of μ. The obtained results contribute to understand the influence of lacrimal fluid composition on the tribological behavior of CLs materials, being relevant for the selection and optimization of these devices.

STATEMENT OF SIGNIFICANCE

Understanding the tribological behavior of contact lenses (CLs) materials in contact with the lacrimal fluid and the role of its components is of major importance to optimize the comfort and overall success of these devices. Nevertheless, the available information on this subject in the literature is scarce. In this work, the effect of albumin and cholesterol (two of the main components of the lacrimal fluid) on the frictional response of distinct types of hydrogels suitable for CLs, is compared, for the first time. Significant differences were observed with the two molecules, depending on the material, stressing the need to further study this issue to understand, predict and optimize the in vivo performance of CLs.