Micellization and interfacial behavior of a synthetic surfactant–biosurfactant mixture

A Novel Biosurfactant-Based Oil Spill Response Dispersant for Efficient Application under Temperate and Arctic Conditions

Synthetic oil spill dispersants have become essential in offshore oil spill response strategies. However, their use raises significant concerns regarding toxicity to phyto- and zooplankton and other marine organisms, especially in isolated and vulnerable areas such as the Arctic and shorelines. Sustainable alternatives may be developed by replacing the major active components of commercial dispersants with their natural counterparts. During this study, interfacial properties of different types of glycolipid-based biosurfactants (rhamnolipids, mannosylerythritol lipids, and trehalose lipids) were explored in a crude oil-seawater system. The best-performing biosurfactant was further mixed with different nontoxic components of Corexit 9500A, and the interfacial properties of the most promising dispersant blend were further explored with various types of crude oils, weathered oil, bunker, and diesel fuel in natural seawater. Our findings indicate that the most efficient dispersant formulation was achieved when mannosylerythritol lipids (MELs) were mixed with Tween 80 (T). The MELs-T dispersant blend significantly reduced the interfacial tension (IFT) of various crude oils in seawater with results comparable to those obtained with Corexit 9500A. Importantly, no leaching or desorption of MELs-T components from the crude oil-water interface was observed. Furthermore, for weathered and more viscous asphaltenic bunker fuel oil, IFT results with the MELs-T dispersant blend surpassed those obtained with Corexit 9500A. This dispersant blend also demonstrated effectiveness at different dosages (dispersant-to-oil ratio (DOR)) and under various temperature conditions. The efficacy of the MELs-T dispersant was further confirmed by standard baffled flask tests (BFTs) and Mackay-Nadeau-Steelman (MNS) tests. Overall, our study provides promising data for the development of effective biobased dispersants, particularly in the context of petroleum exploitation in subsea resources and transportation in the Arctic.

Thermodynamic Analysis of the Adsorption and Micellization Activity of the Mixtures of Rhamnolipid and Surfactin with Triton X-165

The surface tension of aqueous solutions of Triton X-165 with rhamnolipid or surfactin mixtures was measured. The obtained results were applied for the determination of the concentration and composition of the Triton X-165 and biosurfactants mixture at the water-air interface as well as the contribution of the particular component of the mixtures to water surface tension reduction and the mutual influence of these components on the critical micelle concentration. The determination of these quantities was based on both the commonly used concepts and a new one proposed by us, which assumes that the composition of the mixed monolayer at the water-air interface depends directly on the pressure of the monolayer of the single mixture component and allows us to determine the surface concentration of each mixture component independently of surface tension isotherms shape. Taking into account the composition of the mixed monolayer at the water-air interface, the standard Gibbs adsorption free energy was considered. The obtained results allow us to state that the concentration of both mixture components corresponding to their saturated monolayer and the surface tension of their aqueous solution can be predicted using the surfactants' single monolayer pressure and their mole fraction in the mixed monolayer determined in the proposed way.

Characteristics and pH-Responsiveness of SDBS–Stabilized Crude Oil/Water Nanoemulsions

Nanoemulsions are colloidal systems with a wide spectrum of applications in several industrial fields. In this study, crude oil-in-water (O/W) nanoemulsions were formulated using different dosages of the anionic sodium dodecylbenzenesulfonate (SDBS) surfactant. The formulated nanoemulsions were characterized in terms of emulsion droplet size, zeta potential, and interfacial tension (IFT). Additionally, the rheological behavior, long-term stability, and on-demand breakdown of the nanoemulsions via a pH-responsive mechanism were evaluated. The obtained results revealed the formation of as low as 63.5 nm average droplet size with a narrow distribution (33–142 nm). Additionally, highly negative zeta potential (i.e., −62.2 mV) and reasonably low IFT (0.45 mN/m) were obtained at 4% SDBS. The flow-ability of the nanoemulsions was also investigated and the obtained results revealed an increase in the nanoemulsion viscosity with increasing the emulsifier content. Nonetheless, even at the highest SDBS dosage of 4%, the nanoemulsion viscosity at ambient conditions never exceeded 2.5 mPa·s. A significant reduction in viscosity was obtained with increasing the nanoemulsion temperature. The formulated nanoemulsions displayed extreme stability with no demulsification signs irrespective of the emulsifier dosage even after one-month shelf-life. Another interesting and, yet, surprising observation reported herein is the pH-induced demulsification despite SDBS not possessing a pH-responsive character. This behavior enabled the on-demand breakdown of the nanoemulsions by simply altering their pH via the addition of HCl or NaOH; a complete and quick oil separation can be achieved using this simple and cheap demulsification method. The obtained results reveal the potential utilization of the formulated nanoemulsions in oilfield-related applications such as enhanced oil recovery (EOR), well stimulation and remediation, well-bore cleaning, and formation fracturing.

Regulating Droplet Wetting and Pinning Behaviors on Pathogen-Modified Hydrophobic Surfaces: Strategies and Working Mechanisms

Hydrophobic surfaces modified by pathogens in agricultural production are one of the main reasons to reduce the utilization of pesticides. Adding surfactants to pesticide solutions is a common method to improve their wetting and spreading properties. In this work, the interaction mechanism between pathogen-modified hydrophobic surfaces and mixtures of surfactants and a pesticide was studied in detail. The interaction mechanism was determined by characterizing the wetting and spreading behaviors of droplets on cucumber powdery mildew leaves at different growth stages. When surfactants were added, droplets on cucumber powdery mildew leaves were in the Wenzel wetting state, the pinning force weakened, the contact line speed accelerated, and the adhesion force increased. We explained the micellar state and aggregation behavior of surfactant molecules in a pesticide solution that was applied to the surface of cucumber powdery mildew leaves. Droplets of solutions containing nonionic surfactants easily formed semibald micelles, binding to the pathogen of powdery mildew, whereas droplets containing cationic surfactants did not do so. Because of the electrostatic interaction between cationic surfactant molecules and powdery mildew pathogens, cationic surfactant molecules did not wet the pathogens very well, so we suggest adding nonionic surfactants rather than cationic surfactants to improve the wetting and spreading of pesticide solutions on cucumber powdery mildew leaves. This study provides new insights into enhancing the wetting and deposition of droplets on pathogen-modified hydrophobic surfaces.

Biosurfactants, natural alternatives to synthetic surfactants: Physicochemical properties and applications

Biosurfactants comprise a wide array of amphiphilic molecules synthesized by plants, animals, and microbes. The synthesis route dictates their molecular characteristics, leading to broad structural diversity and ensuing functional properties. We focus here on low molecular weight (LMW) and high molecular weight (HMW) biosurfactants of microbial origin. These are environmentally safe and biodegradable, making them attractive candidates for applications spanning cosmetics to oil recovery. Biosurfactants spontaneously adsorb at various interfaces and self-assemble in aqueous solution, resulting in useful physicochemical properties such as decreased surface and interfacial tension, low critical micellization concentrations (CMCs), and ability to solubilize hydrophobic compounds. This review highlights the relationships between biosurfactant molecular composition, structure, and their interfacial behavior. It also describes how environmental factors such as temperature, pH, and ionic strength can impact physicochemical properties and self-assembly behavior of biosurfactant-containing solutions and dispersions. Comparison between biosurfactants and their synthetic counterparts are drawn to illustrate differences in their structure-property relationships and potential benefits. Knowledge of biosurfactant properties organized along these lines is useful for those seeking to formulate so-called green or natural products with novel and useful properties.

Anticancer Activities of Surfactin and Potential Application of Nanotechnology Assisted Surfactin Delivery

Surfactin, a cyclic lipopeptide biosurfactant produced by various strains of Bacillus genus, has been shown to induce cytotoxicity against many cancer types, such as Ehrlich ascites, breast and colon cancers, leukemia and hepatoma. Surfactin treatment can inhibit cancer progression by growth inhibition, cell cycle arrest, apoptosis, and metastasis arrest. Owing to the potent effect of surfactin on cancer cells, numerous studies have recently investigated the mechanisms that underlie its anticancer activity. The amphiphilic nature of surfactin allows its easy incorporation nano-formulations, such as polymeric nanoparticles, micelles, microemulsions, liposomes, to name a few. The use of nano-formulations offers the advantage of optimizing surfactin delivery for an improved anticancer therapy. This review focuses on the current knowledge of surfactin properties and biosynthesis; anticancer activity against different cancer models and the underlying mechanisms involved; as well as the potential application of nano-formulations for optimal surfactin delivery.

Interaction of a biosurfactant, Surfactin with a cationic Gemini surfactant in aqueous solution

The interaction between biosurfactant Surfactin and cationic Gemini surfactant ethanediyl-1,3-bis(dodecyldimethylammonium bromide) (abbreviated as 12-3-12) was investigated using turbidity, surface tension, dynamic light scattering (DLS) and small angle neutron scattering (SANS). Analysis of critical micelle concentration (CMC) values in Surfactin/12-3-12 mixture indicates that there is synergism in formation of mixed Surfactin/12-3-12 micelles. Although Surfactin and 12-3-12 are oppositely charged in phosphate buffer solution (PBS, pH7.4), there are no precipitates observed at the concentrations below the CMC of Surfactin/12-3-12 system. However, at the concentration above CMC value, the Surfactin/12-3-12 mixture is severely turbid with high 12-3-12 content. DLS and SANS measurements follow the size and shape changes of mixed Surfactin/12-3-12 aggregates from small spherical micelles via elongated aggregates to large bulk complexes with increasing fraction of Gemini surfactant.

Benchmarking the Self-Assembly of Surfactin Biosurfactant at the Liquid-Air Interface to those of Synthetic Surfactants

The adsorption of surfactin, a lipopeptide biosurfactant, at the liquid–air interface has been investigated in this work. The maximum adsorption density and the nature and the extent of lateral interaction between the adsorbed surfactin molecules at the interface were estimated from surface tension data using the Frumkin model. The quantitative information obtained using the Frumkin model was also compared to those obtained using the Gibbs equation and the Langmuir–Szyszkowski model. Error analysis showed a better agreement between the experimental and the calculated values using the Frumkin model relative to the other two models. The adsorption of surfactin at the liquid–air interface was also compared to those of synthetic anionic, sodium dodecylbenzenesulphonate (SDBS), and nonionic, octaethylene glycol monotetradecyl ether (C₁₄E₈), surfactants. It has been estimated that the area occupied by a surfactin molecule at the interface is about 3- and 2.5-fold higher than those occupied by SDBS and C₁₄E₈ molecules, respectively. The interaction between the adsorbed molecules of the anionic biosurfactant (surfactin) was estimated to be attractive, unlike the mild repulsive interaction between the adsorbed SDBS molecules.

Potential therapeutic applications of biosurfactants

Biosurfactants have recently emerged as promising molecules for their structural novelty, versatility, and diverse properties that are potentially useful for many therapeutic applications. Mainly due to their surface activity, these molecules interact with cell membranes of several organisms and/or with the surrounding environments, and thus can be viewed as potential cancer therapeutics or as constituents of drug delivery systems. Some types of microbial surfactants, such as lipopeptides and glycolipids, have been shown to selectively inhibit the proliferation of cancer cells and to disrupt cell membranes causing their lysis through apoptosis pathways. Moreover, biosurfactants as drug delivery vehicles offer commercially attractive and scientifically novel applications. This review covers the current state-of-the-art in biosurfactant research for therapeutic purposes, providing new directions towards the discovery and development of molecules with novel structures and diverse functions for advanced applications.