Synthesis, characterization, biodegradability and surfactant properties of bio-sourced lauroyl poly(glycerol-succinate) oligoesters

Novel green-based polyglycerol polymeric nanoparticles loaded with ferulic acid: A promising approach for hepatoprotection

In the pursuit of eco-friendly and sustainable materials, polyglycerol diacid polymers hold immense promise for drug delivery compared to those derived from fossil fuels. Harnessing this potential, we aimed to prepare nanoparticles (NPs) derived from sustainable polymers, loaded with ferulic acid (FA), a natural polyphenolic compound known for its shielding effect against liver-damaging agents, including carbon tetrachloride (CCl4). Glycerol was esterified with renewable monomers, such as succinic acid, adipic acid, and/or FA, resulting in the creation of a novel class of polyglycerol diacid polymers. Characterization via Fourier-transform infrared spectroscopy and nuclear magnetic resonance confirmed the successful synthesis of these polymers with <7 % residual monomers. FA-loaded NPs were fabricated using the newly synthesized polymers. To further augment their potential, the NPs were coated with chitosan. The chitosan-coated NPs boasted an optimal PS of 290 ± 5.03 nm, showing superior physical stability, and a commendable EE% of 58.79 ± 0.43%w/v. The cytotoxicity was examined on fibroblast cells using the SRB assay. In-vivo experiments employing a CCl4-induced liver injury model yielded compelling evidence of the heightened hepatoprotective effects conferred by chitosan-coated particles. This demonstrates the benefits of incorporating sustainable polymers into innovative composites for efficient drug delivery, indicating their potential for creating versatile platforms for various therapeutic applications.

Synthesis of Prepolymers of Poly(glycerol-co-diacids) Based on Sebacic and Succinic Acid Mixtures

In this study, poly(glycerol-co-diacids) prepolymers were produced using different ratios of glycerol (G), sebacic acid (S), and succinic acid (Su) (molar ratios: GS 1:1, GSSu 1:0.9:0.1, GSSu 1:0.8:0.2, GSSu 1:0.5:0.5, GSSu 1:0.2:0.8, GSSu 1:0.1:0.9, GSu 1:1). All polycondensation reactions were performed at 150 °C until reaching a degree of polymerization of ≈55%, inferred by the water volume collected from a reactor. We concluded that the reaction time is correlated with the ratio of diacids used, that is, the increase in succinic acid is proportional to a decrease in the duration of the reaction. In fact, the reaction of poly(glycerol sebacate) (PGS 1:1) is twice as slow as the reaction of poly(glycerol succinate) (PGSu 1:1). The obtained prepolymers were analyzed by electrospray ionization mass spectrometry (ESI-MS) and ¹H and ¹³C nuclear magnetic resonance (NMR). Besides its catalytic influence in poly(glycerol)/ether bond formation, the presence of succinic acid also contributes to a mass growth of ester oligomers, the formation of cyclic structures, a greater number of oligomers detected, and a difference in mass distribution. When compared with PGS (1:1), and even at lower ratios, the prepolymers produced with succinic acid presented mass peak characteristics of oligomer species with a glycerol unit as its end group in higher abundance. Generally, the most abundant oligomers have molecular weights between 400 and 800 g/mol.

Syntheses of high molecular weight hydroxy functional copolymers by green and selective polycondensation methods

Synthesizing hydroxy-functional linear copolymers with high molecular weights (M_n) and low branching degree (Den%) remains challenging, although there has been much headway in the area of functional copolymers. Here, we studied the effect of polymerization methods (one-step or two-step) and solvents (organic solvent: diphenyl ether or ionic liquids: [C_nmim]TF₂N/BF₄/PF₆, n = 2, 4, 6, 8, or 10) on M_n and Den% of copolymers P(OA–GA) (1,8-octanediol adipate (O-A)/glycerol adipate (G-A)). The M_n of P(OA–GA) reached up to 53 937 g mol⁻¹ in two-step in diphenyl ether, and the Den% of glycerol can be controlled within 30%. The physical properties of these copolymers were investigated by contact angles, differential scanning calorimetry (DSC), and in vitro biodegradation. With increasing glycerol content in the polyesters, both hydrophilic properties and degradation properties increased. This system not only facilitates the synthesis of functional polyesters with high molecular weight and low branching, but also expands the possibility of using bio-based monomers to synthesize functional polymers.

High molecular weight hydroxy functional copolymers have been synthesized by two-step polycondensation.

Polyglycerol Hyperbranched Polyesters: Synthesis, Properties and Pharmaceutical and Biomedical Applications

In a century when environmental pollution is a major issue, polymers issued from bio-based monomers have gained important interest, as they are expected to be environment-friendly, and biocompatible, with non-toxic degradation products. In parallel, hyperbranched polymers have emerged as an easily accessible alternative to dendrimers with numerous potential applications. Glycerol (Gly) is a natural, low-cost, trifunctional monomer, with a production expected to grow significantly, and thus an excellent candidate for the synthesis of hyperbranched polyesters for pharmaceutical and biomedical applications. In the present article, we review the synthesis, properties, and applications of glycerol polyesters of aliphatic dicarboxylic acids (from succinic to sebacic acids) as well as the copolymers of glycerol or hyperbranched polyglycerol with poly(lactic acid) and poly(ε-caprolactone). Emphasis was given to summarize the synthetic procedures (monomer molar ratio, used catalysts, temperatures, etc.,) and their effect on the molecular weight, solubility, and thermal and mechanical properties of the prepared hyperbranched polymers. Their applications in pharmaceutical technology as drug carries and in biomedical applications focusing on regenerative medicine are highlighted.

Nonionic Glycolipids for Chromium Flotation- and Emulsion (W/O and O/W)-Based Bioactive Release

Biosourced surfactants are endeavored as a green alternative to biosurfactants and petrochemical surfactants having industrial utilization. Nine glycolipids with headgroup and chain length variation were derived from renewable resources like vegetable oils, carbohydrates, and amino acids. The concentration-dependent interfacial activity, foamability, wetting power, emulsification power, and solubilization capacities of glycolipids were investigated to provide a structure-activity relationship. Later, the metal flotation and emulsification experiments were performed. In general, for metal flotation, the surfactant should contain a hydrophobic tail, hydrophilic head, and chelating function. In the present investigation, it was observed that the headgroup of a glycolipid can serve as a hydrophilic head as well as perform a chelating function. Moreover, heat energy generated from the sunlight was utilized for metal flotation. Additionally, these glycolipids are capable to form stable sunflower oil-water (W/O and O/W) emulsions. The mechanical and thermal stabilities and hydrophobic chain length dependency of the prepared emulsions at different water volume fractions are explored. Furthermore, encapsulation and release of water-soluble (riboflavin and l-ascorbic acid) and oil-soluble (curcumin and α-tocopherol) bioactives in glycolipid emulsions were monitored. Thus, glycolipids under investigation had shown the possibility for pretreatment of chromium-containing wastewaters and bioactive-loaded emulsions toward the controlled release.

Synthesis of Glycerol-Based Biopolyesters as Toughness Enhancers for Polylactic Acid Bioplastic through Reactive Extrusion

The synthesis of polyesters based on glycerol, succinic acid [poly(glycerol succinate), PGS] and/or maleic anhydride [poly(glycerol succinate-co-maleate), PGSMA] was investigated aiming to produce a green product suitable for toughening of polylactic acid (PLA) using melt blending technologies. The molar ratio of reactants and the synthesis temperature were screened to find optimum synthesis conditions leading to the highest toughness enhancement of PLA. It was found that a molar ratio of reactants of 1:1 glycerol/succinic acid increases the effectiveness of PGS as a toughening agent for PLA, which correlates with the achievement of a higher molecular weight on the synthesis of PGS. The introduction of maleic anhydride as a comonomer for the synthesis of the partial replacement of succinic acid was advantageous for making PGS suitable for reactive extrusion (REX) mediated by free radical initiators. The tensile toughness of the REX PLA/PGSMA blends was improved by 392% compared with that of neat PLA, which was caused by the simultaneous cross-linking of PGSMA within the PLA matrix, and the in situ formation of PLA-g-PGSMA graft copolymers acting as interfacial compatibilizers. Two-dimensional nuclear magnetic resonance and Fourier transform infrared analysis confirmed the formation of PLA-g-PGSMA species on REX experiments. This in turn caused a decrease in the diameter of the PGS particles dispersed within the PLA matrix from >10 μm to approximately 2 μm as observed using scanning electron microscopy. A further increase of 1600% in the toughness of the blends was achieved by lowering the synthesis temperature of PGSMA from 180 to 150 °C. The optimum synthesis conditions for PGSMA leading to the highest increase in the toughness of 80/20 PLA/PGSMA blends were found to be 1:0.5:0.5 mol glycerol/succinic acid/maleic anhydride synthesized at a temperature of 150 °C for 5 h.

Preparation, characterization and in vivo evaluation of curcumin self-nano phospholipid dispersion as an approach to enhance oral bioavailability

The aim of this study was to examine the efficacy of self-nano phospholipid dispersions (SNPDs) based on Phosal(®) to improve the oral bioavailability of curcumin (CUR). SNPDs were prepared with Phosal(®) 53 and Miglyol 812 at different surfactant ratio. Formulations were evaluated for particle size, polydispersity index, zeta potential, and robustness toward dilution, TEM as well as in vitro drug release. The in vivo oral absorption of selected formulations in comparison to drug suspension was evaluated in rats. Moreover, formulations were assessed for in vitro characteristic changes before and after storage. The SNPDs were miscible with water in any ratio and did not show any phase separation or drug precipitation. All the formulas were monodisperse with nano range size from 158±2.6 nm to 610±6.24 nm. They passed the pharmacopeial tolerance for CUR dissolution. No change in dissolution profile and physicochemical characteristics was detected after storage. CUR-SNPDs are found to be more bioavailable compared with suspension during an in vivo study in rats and in vitro release studies failed to imitate the in vivo conditions. These formulations might be new alternative carriers that enhance the oral bioavailability of poorly water-soluble molecules, such as CUR.