Stability of multi-walled carbon nanotube+laponite hybrid particles in aqueous suspensions

Curing Time Impacts on the Mechanical and Petrophysical Properties of a Laponite-Based Oil Well Cement

Throughout the life of a well, the cement sheath is exposed to several loadings, which can harm its key properties and impede its functions. These loadings become more significant at the early age of forming the cement sheath in which the properties of the cement are not completely developed. In this study, 10 cement samples with and without laponite particles were prepared and cured for five different periods (6, 12, 24, 48, and 72 h). The failure properties, petrophysical parameters, elastic properties, and density variation along the samples were examined. All of the samples were characterized by nuclear magnetic resonance and X-ray diffraction to understand the influence of the curing times on the cement properties. The results showed that the compressive and tensile strengths of both cement systems increased with the curing time and the incorporation of the laponite particle increased the strength of the cement. The permeability of both cement samples decreased with curing time, and the addition of laponite also decreased the permeability of the cement samples because of the presence of laponite-clay particles. The addition of laponite particles also increased the elasticity of the cement as indicated by the decrease in Young's modulus and the increase in Poisson's ratio. Logarithmic relationships were established to represent the changes in porosity, compressive strength, and tensile strength, while the changes in the other properties of permeability, Poisson's ratio, Young's modulus, and density variation were represented accurately with power-law equations.

Development of a Homogenous Cement Slurry Using Synthetic Modified Phyllosilicate while Cementing HPHT Wells

Cement slurry segregation has a detrimental impact on the cement matrix efficiency in term of zonal isolation. In this study, synthetic modified phyllosilicate (SMP) dispersant, which is known as laponite RD is suggested to reduce the slurry segregation and enhance the vertical homogeneity of the cement matrix in term of density distribution. Seven cement slurries were prepared with different SMP concentrations using molds with different dimensions based on the targeted test, then cured for 24 h at 140 °C and 3000 psi using a high-pressure and high-temperature curing chamber. After that, the samples’ density distribution was evaluated using a direct density measurement and computer tomography (CT) scan imaging technique, and the effect of SMP on the cement rheological parameters, permeability, and compressive strength and were also evaluated. The performance of SMP was then compared with a commercial dispersant. As a result, 0.3% by weight of cement (BWOC) of SMP is found to considerably reduce the vertical density variation along the cement column to 0.46% compared with a density variation of 4.78% for the slurry with the commercial dispersant. The CT scan images confirmed the vertical homogeneity of the slurry with 0.3% BWOC of SMP. Addition of 0.3% BWOC of SMP increased the yield point of the cement slurry to 60.6 MPa compared with 20.5 MPa for the slurry with 0.25% of the commercial dispersant. Adding 0.3% BWOC of SMP into the cement formulation decreased the permeability by 37.1% compared with the commercial dispersant. The sample with 0.3% BWOC of SMP has a compressive strength of 43.9 MPa.

Distribution behavior of superparamagnetic carbon nanotubes in an aqueous system

This study investigates the distribution behavior of superparamagnetic multiwalled carbon nanotubes (SPM-MWCNTs) in an aqueous system containing Lake Tai sediment. Specifically, the effects of dissolved organic matter (DOM) and sediment on SPM-MWCNTs under various conditions and the interaction forms between them were evaluated through a modified mathematical model and characterization. The results showed that DOM can stabilize SPM-MWCNTs by providing sterically and electrostatically stable surfaces, even under high sodium concentrations. The fitting accuracy of the Freundlich adsorption isotherm is higher than that of the Langmuir adsorption isotherm. Therefore, the adsorption of SPM-MWCNT on the sediment should proceed through a multiple, complex and heterogeneous adsorption mechanism. Characterization analyses indicated that DOM may serve as a bridge for the inorganic adsorption between SPM-MWCNTs and sediment. This study is the first to investigate the distribution behavior of magnetite coated carbon nanotubes (CNTs), which simplified the separation and quantification considerably. The findings of this study will serve as a valuable reference for future studies of magnetic CNTs.

Mechanism of Methylene Blue adsorption on hybrid laponite-multi-walled carbon nanotube particles

The kinetics of adsorption and parameters of equilibrium adsorption of Methylene Blue (MB) on hybrid laponite-multi-walled carbon nanotube (NT) particles in aqueous suspensions were determined. The laponite platelets were used in order to facilitate disaggregation of NTs in aqueous suspensions and enhance the adsorption capacity of hybrid particles for MB. Experiments were performed at room temperature (298 K), and the laponite/NT ratio (Xl) was varied in the range of 0-0.5. For elucidation of the mechanism of MB adsorption on hybrid particles, the electrical conductivity of the system as well as the electrokinetic potential of laponite-NT hybrid particles were measured. Three different stages in the kinetics of adsorption of MB on the surface of NTs or hybrid laponite-NT particles were discovered to be a fast initial stage I (adsorption time t=0-10 min), a slower intermediate stage II (up to t=120 min) and a long-lasting final stage III (up to t=24hr). The presence of these stages was explained accounting for different types of interactions between MB and adsorbent particles, as well as for the changes in the structure of aggregates of NT particles and the long-range processes of restructuring of laponite platelets on the surface of NTs. The analysis of experimental data on specific surface area versus the value of Xl evidenced in favor of the model with linear contacts between rigid laponite platelets and NTs. It was also concluded that electrostatic interactions control the first stage of adsorption at low MB concentrations.