1
|
Faysal AA, Kaya SI, Cetinkaya A, Ozkan SA, Gölcü A. The Effect of Polymerization Techniques on the Creation of Molecularly Imprinted Polymer Sensors and Their Application on Pharmaceutical Compounds. Crit Rev Anal Chem 2024:1-20. [PMID: 38252120 DOI: 10.1080/10408347.2023.2301652] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/23/2024]
Abstract
Molecularly imprinted polymers (MIPs) have become more prevalent in fabricating sensor applications, particularly in medicine, pharmaceuticals, food quality monitoring, and the environment. The ease of their preparation, adaptability of templates, superior affinity and specificity, improved stability, and the possibility for downsizing are only a few benefits of these sensors. Moreover, from a medical perspective, monitoring therapeutic medications and determining pharmaceutical compounds in their pharmaceutical forms and biological systems is very important. Additionally, because medications are hazardous to the environment, effective, quick, and affordable determination in the surrounding environment is of major importance. Concerning a variety of performance criteria, including sensitivity, specificity, low detection limits, and affordability, MIP sensors outperform other published technologies for analyzing pharmaceutical drugs. MIP sensors have, therefore, been widely used as one of the most crucial techniques for analyzing pharmaceuticals. The first part of this review provides a detailed explanation of the many polymerization techniques that were employed to create high-performing MIP sensors. In the subsequent section of the review, the utilization of MIP-based sensors for quantifying the drugs in their pharmaceutical preparation, biological specimens, and environmental samples are covered in depth. Finally, a critical evaluation of the potential future research paths for MIP-based sensors clarifies the use of MIP in pharmaceutical fields.
Collapse
Affiliation(s)
- Abdullah Al Faysal
- Faculty of Sciences and Letters, Department of Chemistry, Istanbul Technical University, Maslak, Istanbul, Türkiye
| | - S Irem Kaya
- Gulhane Faculty of Pharmacy, Department of Analytical Chemistry, University of Health Sciences, Ankara, Türkiye
| | - Ahmet Cetinkaya
- Faculty of Pharmacy, Department of Analytical Chemistry, Ankara University, Türkiye
- Graduate School of Health Sciences, Ankara University, Türkiye
| | - Sibel A Ozkan
- Faculty of Pharmacy, Department of Analytical Chemistry, Ankara University, Türkiye
| | - Ayşegül Gölcü
- Faculty of Sciences and Letters, Department of Chemistry, Istanbul Technical University, Maslak, Istanbul, Türkiye
| |
Collapse
|
2
|
Functional nano molecularly imprinted polymer for the detection of Penicillin G in pharmaceutical samples. JOURNAL OF POLYMER RESEARCH 2023. [DOI: 10.1007/s10965-023-03496-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/21/2023]
|
3
|
Sergeyeva T, Piletska O, Piletsky S. Rationally designed molecularly imprinted polymer membranes as antibody and enzyme mimics in analytical biotechnology. BBA ADVANCES 2023; 3:100070. [PMID: 37082261 PMCID: PMC10074925 DOI: 10.1016/j.bbadva.2022.100070] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/30/2022] [Revised: 12/10/2022] [Accepted: 12/18/2022] [Indexed: 12/24/2022] Open
Abstract
The paper is a self-review of works on development of new approaches to formation of mimics of receptor and catalytic sites of biological macromolecules in the structure of highly cross-linked polymer membranes and thin films. The general strategy for formation of the binding sites in molecularly imprinted polymer (MIP) membranes and thin films was described. A selective recognition of a number of food toxins, endocrine disruptors and metabolites is based on the results of computational modeling data for the prediction and optimization of their structure. A strategy proposed for the design of the artificial binding sites in MIP membranes was supported by the research performed by the authors on development of a number of the MIP membrane-based affinity and catalytic biosensors for selective and sensitive measurement (detection limits 0.3-100 nM) of the target analytes. Novel versatile approaches aimed at improving sensitivity of the developed biosensor systems were discussed.
Collapse
|
4
|
Imidazole-Based Monomer as Functional Unit for the Specific Detection of Paraxanthine in Aqueous Environments. CHEMOSENSORS 2022. [DOI: 10.3390/chemosensors10080301] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/10/2022]
Abstract
In the context of personalized medicine, the paraxanthine-to-caffeine ratio is an accepted standard for the optimization of the dose-response effect of many pharmaceuticals in individual patients. There is a strong drive towards the development of cheaper and portable devices for the detection of biomarkers, including paraxanthine and caffeine, which requires materials with high binding efficiency and specificity. We designed a recognition unit specific for paraxanthine which can discriminate molecules with small structural differences and can be used to increase the sensitivity of sensors. A number of functional units were screened by nuclear magnetic resonance for their ability to form specific binding interactions with paraxanthine in water and negligible interactions with its structural analogue caffeine. Imidazole was identified as the unit showing the most promising results and its two polymerizable derivatives were evaluated by isothermal titration calorimetry to identify the best monomer. The data suggested that 4-vinylimidazole was the most promising unit forming specific and strong binding interaction with paraxanthine. The calorimetry experiments allowed also the determination of the thermodynamic parameters of all interactions and the association constant values. Optimization of polymerization protocols in water, achieving high monomer conversions and chemical yields, demonstrate the suitability of the selected functional monomer for polymer preparations, targeting the detection of paraxanthine in aqueous environments.
Collapse
|
5
|
Baohe Li, Li C, Jiang L, Zeng Y, Wang N. Preparation of Molecularly Imprinted Polymer Based on Calcium Acrylate and Acrylic Acid. POLYMER SCIENCE SERIES B 2022. [DOI: 10.1134/s1560090422020026] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
6
|
Mukunzi D, Habimana JDD, Li Z, Zou X. Mycotoxins detection: view in the lens of molecularly imprinted polymer and nanoparticles. Crit Rev Food Sci Nutr 2022; 63:6034-6068. [PMID: 35048762 DOI: 10.1080/10408398.2022.2027338] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
Molecularly imprinted polymers (MIPs) are tailor-made functional composites which selectively recognize and bind the target molecule of interest. MIP composites are products of the massively cross-linked polymer matrices, generated via polymerization, with bio-inspired recognition cavities that are morphologically similar in size, shape and spatial patterns to the target conformation. These features have enabled researchers to expand the field of molecular recognition, more specifically for target with peculiar requirements. Nevertheless, MIPs alone are characterized with weak sensitivity. Besides, nanoparticles (NPs) are remarkably sensitive but also suffer from poor selectivity. Intriguingly, the combination of the two results in a highly sensitive and selective MIP composite. For instance, the conjugation of different functional NPs with MIPs can generate new flexible target capture tools, either a dynamic sensor or a novel drug delivery system. In this regard, although the technology is considered an established and feasible approach, it is still perceived as a burgeoning technology for various fields, which makes it unceasingly worthy reviewing. Therefore, in this review, we attempt to give an update on various custom-made biosensors based on MIPs in combination with various NPs for the detection of mycotoxins, the toxic secondary metabolites of fungi. We first summarize the classification, prevalence, and toxicological characteristics of common mycotoxins. Next, we provide an overview of MIP composites and their characterization, and then segment the role of NPs with respect to common types of MIP-based sensors. At last, conclusions and outlook are discussed.
Collapse
Affiliation(s)
- Daniel Mukunzi
- School of Food and Biological Engineering, Jiangsu University, Zhenjiang, China
| | - Jean de Dieu Habimana
- Key Laboratory of Regenerative Biology, South China Institute for Stem Cell Biology and Regenerative Medicine, Guangzhou Institutes of Biomedicine and Health, Chinese Academy of Sciences, Guangzhou, China
- University of Chinese Academy of Sciences, Beijing, China
| | - Zhiyuan Li
- Key Laboratory of Regenerative Biology, South China Institute for Stem Cell Biology and Regenerative Medicine, Guangzhou Institutes of Biomedicine and Health, Chinese Academy of Sciences, Guangzhou, China
- University of Chinese Academy of Sciences, Beijing, China
| | - Xiaobo Zou
- School of Food and Biological Engineering, Jiangsu University, Zhenjiang, China
| |
Collapse
|
7
|
Configuration of molecularly imprinted polymers for specific uptake of pharmaceutical in aqueous media through radical polymerization method. JOURNAL OF POLYMER RESEARCH 2022. [DOI: 10.1007/s10965-022-02908-8] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
|
8
|
Campos IM, Zorel JA, Menegatto M, Silva F, Adarme OFH, Tonucci M, Baêta BEL, Aquino SF, Silva SQ. Hydrogen production by Enterobacter sp. LBTM 2 using sugarcane bagasse hemicellulose hydrolysate and a synthetic substrate: understanding and controlling toxicity. AN ACAD BRAS CIENC 2021; 93:e20201679. [PMID: 34586181 DOI: 10.1590/0001-3765202120201679] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2020] [Accepted: 02/27/2021] [Indexed: 11/22/2022] Open
Abstract
Sugars released by thermochemical pretreatment of lignocellulosic biomass are possible substrate for hydrogen production. However, the major drawback for bacterial fermentation is the toxicity of weak acids and furan derivatives normally present in such substrate. This study aimed to investigate the metabolism involved in hydrogen production by the isolate Enterobacter LBTM2 using 10, 20 and 30-fold diluted synthetic (SH) and sugarcane bagasse hemicellulose (SBH) hydrolysates. In addition, the effects of acetic acid, formic acid and furfural on the bacterial metabolism, as well as detoxification of SBH with activated carbon and molecularly imprinted polymers on the hydrogen production were assessed. The results showed the best hydrogen yield was 0.46 mmol H2/mmol sugar for 20-times diluted SH, which was 2.3-times higher than obtained in SBH experiments. Bacterial growth and hydrogen production were negatively affected by 0.8 g/L of acetic acid when added alone, but were totally inhibited when formic acid (0.4 g/L) and furfural (0.3 g/L) were also supplied. However the maximum hydrogen production of SBH20 has duplicated when 3% of powdered activated carbon was added to the SBH experiment. The results presented herein can be helpful in understanding the bottlenecks in biohydrogen production and could contribute towards development of lignocellulosic biorefinery.
Collapse
Affiliation(s)
- Ivon M Campos
- Universidade Federal de Ouro Preto, Departamento de Ciências Biológicas, Laboratório de Biologia e Tecnologia de Microrganismos, Campus Morro do Cruzeiro, s/n, 35400-000 Ouro Preto, MG, Brazil
| | - Jose Augusto Zorel
- Universidade Federal de Ouro Preto, Departamento de Ciências Biológicas, Laboratório de Biologia e Tecnologia de Microrganismos, Campus Morro do Cruzeiro, s/n, 35400-000 Ouro Preto, MG, Brazil
| | - Marilia Menegatto
- Universidade Federal de Ouro Preto, Departamento de Ciências Biológicas, Laboratório de Biologia e Tecnologia de Microrganismos, Campus Morro do Cruzeiro, s/n, 35400-000 Ouro Preto, MG, Brazil
| | - Flaviane Silva
- Universidade Federal de Ouro Preto, Departamento de Ciências Biológicas, Laboratório de Biologia e Tecnologia de Microrganismos, Campus Morro do Cruzeiro, s/n, 35400-000 Ouro Preto, MG, Brazil
| | - Oscar F H Adarme
- Universidade Federal de Ouro Preto, Departamento de Química, Laboratório de Química Tecnológica e Ambiental, Campus Morro do Cruzeiro, s/n, 35400-000 Ouro Preto, MG, Brazil
| | - Marina Tonucci
- Universidade Federal de Ouro Preto, Departamento de Química, Laboratório de Química Tecnológica e Ambiental, Campus Morro do Cruzeiro, s/n, 35400-000 Ouro Preto, MG, Brazil
| | - Bruno E L Baêta
- Universidade Federal de Ouro Preto, Departamento de Química, Laboratório de Química Tecnológica e Ambiental, Campus Morro do Cruzeiro, s/n, 35400-000 Ouro Preto, MG, Brazil
| | - Sérgio F Aquino
- Universidade Federal de Ouro Preto, Departamento de Química, Laboratório de Química Tecnológica e Ambiental, Campus Morro do Cruzeiro, s/n, 35400-000 Ouro Preto, MG, Brazil
| | - Silvana Q Silva
- Universidade Federal de Ouro Preto, Departamento de Ciências Biológicas, Laboratório de Biologia e Tecnologia de Microrganismos, Campus Morro do Cruzeiro, s/n, 35400-000 Ouro Preto, MG, Brazil
| |
Collapse
|
9
|
Fu L, Chen Q, Chen J, Ren L, Tang L, Shan W. Magnetic carbon nanotubes-molecularly imprinted polymer coupled with HPLC for selective enrichment and determination of ferulic acid in traditional Chinese medicine and biological samples. J Chromatogr B Analyt Technol Biomed Life Sci 2021; 1180:122870. [PMID: 34416676 DOI: 10.1016/j.jchromb.2021.122870] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2021] [Revised: 07/20/2021] [Accepted: 07/22/2021] [Indexed: 02/01/2023]
Abstract
A molecularly imprinted polymer (MIP) with magnetic carbon nanotubes (MCNTs) as carrier was synthesized and used for the enrichment and determination of ferulic acid (FA) by high-performance liquid chromatography (HPLC). The morphology and structure of the FA magnetic carbon nanotubes-molecularly imprinted polymers (MCNTs@FA-MIPs) were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results demonstrated that the prepared MCNTs@FA-MIPs had excellent magnetic properties and uniform appearance. The adsorption properties of the novel MIP were studied by kinetic, and isothermal adsorption experiments. The results showed that the MCNTs@FA-MIPs exhibited relatively good uptake kinetics (equilibrium time, 2 h), high adsorption capacity (50 mg⋅g-1), fast separation, and good selectivity for the template molecule with a separation factor α of 1.73. The MCNTs@FA-MIPs combined with HPLC were successfully applied to the separation, enrichment, and determination of FA in a Ligusticum chuanxiong extract and in plasma of rats which had been administered with Taitai beauty essence. The recoveries for FA were 95.53-100.03 % with relative standard deviations (RSDs) less than 5.5%. The results confirmed that the proposed MCNTs@FA-MIPs offered efficient extraction of FA from traditional Chinese medicinal preparations and blood samples and with high specificity.
Collapse
Affiliation(s)
- Lulu Fu
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310000, China
| | - Qiu Chen
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310000, China
| | - Jintao Chen
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310000, China
| | - Liqin Ren
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310000, China
| | - Lan Tang
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310000, China.
| | - Weiguang Shan
- College of Pharmaceutical Science, Zhejiang University of Technology, Hangzhou 310000, China.
| |
Collapse
|
10
|
Gong H, Hajizadeh S, Liu W, Ye L. Imprinted Polymer Beads Loaded with Silver Nanoparticles for Antibacterial Applications. ACS APPLIED BIO MATERIALS 2021; 4:2829-2838. [PMID: 35014322 DOI: 10.1021/acsabm.1c00045] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
Abstract
After the emergence of multidrug-resistant strains, antibiotic resistance in bacteria has become an important problem. Thus, materials for combating multidrug-resistant bacteria are of vital importance. In this work, we developed an antibacterial material that can selectively capture and destruct bacteria on the basis of their physical characteristics. To achieve bacterial capture and deactivation with a single material, we used bacterial cells as templates to synthesize surface-imprinted polymer beads in bacteria-stabilized Pickering emulsions. Acrylate-functionalized polyethylenimine was used to coat the bacterial surface so that the coated bacteria can act as a particle stabilizer to establish an oil-in-water Pickering emulsion. Hydrophobic Ag nanoparticles were introduced into the oil phase composed of cross-linking monomers. Bacteria-imprinted beads (BIB) were obtained after the oil phase was polymerized. Bacterial binding experiments confirmed the importance of the imprinted sites for specific recognition with the target bacteria. The Ag nanoparticles embedded inside the polymer beads enhanced bacterial inactivation and reduced the leakage of heavy metal in aquatic environment. The combination of bacteria-imprinting with delivery of general-purpose antibacterial reagents offers a useful approach toward selective capture and destruction of bacteria.
Collapse
Affiliation(s)
- Haiyue Gong
- Division of Pure and Applied Biochemistry, Department of Chemistry, Lund University, Box 124, Lund 221 00, Sweden
| | - Solmaz Hajizadeh
- Division of Pure and Applied Biochemistry, Department of Chemistry, Lund University, Box 124, Lund 221 00, Sweden
| | - Weifeng Liu
- Key Laboratory of Interface Science and Engineering in Advanced materials, Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
| | - Lei Ye
- Division of Pure and Applied Biochemistry, Department of Chemistry, Lund University, Box 124, Lund 221 00, Sweden
| |
Collapse
|
11
|
Yuan X, Ni T, Zhang D, Liu H, Sun B. Molecularly Imprinted Dual-Responsive Extraction for Avenanthramides Using Covalent Organic Frameworks Doped with Polyethyleneimine-Modified Mn-ZnS Quantum Dots. FOOD ANAL METHOD 2021. [DOI: 10.1007/s12161-021-01979-5] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
12
|
Affiliation(s)
- Dong Yuan
- College of Chemical and Environmental Engineering, Sichuan University of Science and Engineering, Sichuan Zigong, PR China
| | - Dayou Fu
- Analysis and Testing Center, Sichuan University of Science & Engineering, Zigong, PR China
| | - Cuixia Wang
- College of Chemical and Environmental Engineering, Sichuan University of Science and Engineering, Sichuan Zigong, PR China
| |
Collapse
|
13
|
Kaya SI, Karabulut TC, Kurbanoglu S, Ozkan SA. Chemically Modified Electrodes in Electrochemical Drug Analysis. CURR PHARM ANAL 2020. [DOI: 10.2174/1573412915666190304140433] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
Abstract
Electrode modification is a technique performed with different chemical and physical methods
using various materials, such as polymers, nanomaterials and biological agents in order to enhance
sensitivity, selectivity, stability and response of sensors. Modification provides the detection of small
amounts of analyte in a complex media with very low limit of detection values. Electrochemical methods
are well suited for drug analysis, and they are all-purpose techniques widely used in environmental
studies, industrial fields, and pharmaceutical and biomedical analyses. In this review, chemically modified
electrodes are discussed in terms of modification techniques and agents, and recent studies related
to chemically modified electrodes in electrochemical drug analysis are summarized.
Collapse
Affiliation(s)
- Sariye I. Kaya
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, Ankara, Turkey
| | - Tutku C. Karabulut
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, Ankara, Turkey
| | - Sevinç Kurbanoglu
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, Ankara, Turkey
| | - Sibel A. Ozkan
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, Ankara, Turkey
| |
Collapse
|
14
|
Molecularly imprinted polymer as solid phase extraction phase for condensed tannin determination from Brazilian natural sources. J Chromatogr A 2020; 1620:460977. [PMID: 32093903 DOI: 10.1016/j.chroma.2020.460977] [Citation(s) in RCA: 28] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/04/2019] [Revised: 01/31/2020] [Accepted: 02/13/2020] [Indexed: 01/04/2023]
Abstract
This study proposed the developed of a molecularly imprinted polymer for the extraction and determination of condensed tannins from the barks of Red Angico (Anadenanthera macrocarpa), Jabuticaba (Myrciaria jabuticaba) and Umbu (Spondias tuberosa). The polymer was synthesized using the condensed tannin extracted from the Red Angico bark as the template molecule, as well as, catechin standard solution. Selectivity and characterization tests for the molecularly imprinted polymers and a non-imprinted polymer were performed. The polymers were employed as extraction phase for the solid-phase extraction of condensed tannins from the studied samples. A higher imprinting coefficient was obtained for MIP synthesized from catechin standard solution as template. The intrinsic solid-phase extraction variables were evaluated and optimized. The developed methodology showed inter- and intra-day precisions of 6.7-10.1 and 4.6-8.4, respectively, and recovery values ranging from 101.9 to 105.5. The obtained limits of detection and quantification were 10 mg L-1 and 40 mg L-1, respectively. It is important to highlight that the developed methodology here was applied to common waste and tailings from Brazilian food industry. The results indicate that the polymers were capable to extract tannins from the evaluated samples, reducing method cost and time.
Collapse
|
15
|
Wang J, Cheng Y, Peng R, Cui Q, Luo Y, Li L. Co-precipitation method to prepare molecularly imprinted fluorescent polymer nanoparticles for paracetamol sensing. Colloids Surf A Physicochem Eng Asp 2020. [DOI: 10.1016/j.colsurfa.2019.124342] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
|
16
|
Abbas N, Hayat M, Fatima H, Manzoor S, Nawaz S, Mabood F, Yasmean G, Majeed A, Manzoor S. Template-assisted polymeric spherules for the solid phase extraction of chlorfenapyr from contaminated water. SEP SCI TECHNOL 2020. [DOI: 10.1080/01496395.2020.1718707] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Affiliation(s)
- Naseem Abbas
- Institute of Chemical Sciences, Bahauddin Zakariya University, Multan, Pakistan
| | - Muhammad Hayat
- Institute of Chemical Sciences, Bahauddin Zakariya University, Multan, Pakistan
| | - Hira Fatima
- Institute of Chemical Sciences, Bahauddin Zakariya University, Multan, Pakistan
| | - Sadia Manzoor
- Department of Analytical Chemistry, Complutense University of Madrid, Madrid, Spain
| | - Sana Nawaz
- Institute of Chemical Sciences, Bahauddin Zakariya University, Multan, Pakistan
| | - Fazal Mabood
- Department of Biological Sciences and Chemistry, University of Nizwa, Nizwá, Oman
| | - Ghazala Yasmean
- Institute of Chemical Sciences, Bahauddin Zakariya University, Multan, Pakistan
| | - Abdul Majeed
- Faculty of Pharmacy, Bahauddin Zakariya University, Multan, Pakistan
| | - Suryyia Manzoor
- Institute of Chemical Sciences, Bahauddin Zakariya University, Multan, Pakistan
| |
Collapse
|
17
|
Zhang H. Molecularly Imprinted Nanoparticles for Biomedical Applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2020; 32:e1806328. [PMID: 31090976 DOI: 10.1002/adma.201806328] [Citation(s) in RCA: 137] [Impact Index Per Article: 34.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/30/2018] [Revised: 02/28/2019] [Indexed: 06/09/2023]
Abstract
Molecularly imprinted polymers (MIPs) are synthetic receptors with tailor-made recognition sites for target molecules. Their high affinity and selectivity, excellent stability, easy preparation, and low cost make them promising substitutes to biological receptors in many applications where molecular recognition is important. In particular, spherical MIP nanoparticles (or nanoMIPs) with diameters typically below 200 nm have drawn great attention because of their high surface-area-to-volume ratio, easy removal of templates, rapid binding kinetics, good dispersion and handling ability, undemanding functionalization and surface modification, and their high compatibility with various nanodevices and in vivo biomedical applications. Recent years have witnessed significant progress made in the preparation of advanced functional nanoMIPs, which has eventually led to the rapid expansion of the MIP applications from the traditional separation and catalysis fields to the burgeoning biomedical areas. Here, a comprehensive overview of key recent advances made in the preparation of nanoMIPs and their important biomedical applications (including immunoassays, drug delivery, bioimaging, and biomimetic nanomedicine) is presented. The pros and cons of each synthetic strategy for nanoMIPs and their biomedical applications are discussed and the present challenges and future perspectives of the biomedical applications of nanoMIPs are also highlighted.
Collapse
Affiliation(s)
- Huiqi Zhang
- State Key Laboratory of Medicinal Chemical Biology, Key Laboratory of Functional Polymer Materials (Ministry of Education), Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), College of Chemistry, Nankai University, Tianjin, 300071, P. R. China
| |
Collapse
|
18
|
Shevchenko N, Pankova G, Shabsels B, Baigildin V, Khoshkin A, Ukleev T, Sel’kin A. Fluorescent core-shell polymer particles containing luminophore dyes: synthesis and optical response to acetone. J DISPER SCI TECHNOL 2019. [DOI: 10.1080/01932691.2018.1480389] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
Affiliation(s)
- Natalia Shevchenko
- Institute of Macromolecular Compounds Russian Academy of Sciences, Bolshoy pr. 31, Saint Petersburg, Russia
| | - Galina Pankova
- Institute of Macromolecular Compounds Russian Academy of Sciences, Bolshoy pr. 31, Saint Petersburg, Russia
| | - Boris Shabsels
- Institute of Macromolecular Compounds Russian Academy of Sciences, Bolshoy pr. 31, Saint Petersburg, Russia
| | - Vadim Baigildin
- Institute of Macromolecular Compounds Russian Academy of Sciences, Bolshoy pr. 31, Saint Petersburg, Russia
| | - Alexander Khoshkin
- Photochemistry Center of Russian Academy of Sciences, Novatorov st. 7a, Moscow, Russia
| | - Timofei Ukleev
- Ioffe Physical-Technical Institute, Polytechnicheskaya st. 26, Saint Petersburg, Russia
- St Petersburg State University, Universitetskaya nab. 7/9, Saint Petersburg, Russia
| | - Alexander Sel’kin
- Ioffe Physical-Technical Institute, Polytechnicheskaya st. 26, Saint Petersburg, Russia
- St Petersburg State University, Universitetskaya nab. 7/9, Saint Petersburg, Russia
| |
Collapse
|
19
|
Ozcelikay G, Karadurmus L, Kaya SI, Bakirhan NK, Ozkan SA. A Review: New Trends in Electrode Systems for Sensitive Drug and Biomolecule Analysis. Crit Rev Anal Chem 2019; 50:212-225. [PMID: 31107105 DOI: 10.1080/10408347.2019.1615406] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023]
Abstract
Drug and biomolecule analysis with high precision, fast response, not expensive, and user-friendly methods have been very important for developing technology and clinical applications. Electrochemical methods are highly capable for assaying the concentration of electroactive drug or biomolecule and supply excellent knowledge concerning its physical and chemical properties such as electron transfer rates, diffusion coefficients, electron transfer number, and oxidation potential. Electrochemical methods have been widely applied because of their accuracy, sensitivity, cheapness, and can applied on-site determinations of various substances. The progress on electronics has allowed developing reliable, more sensitive and less expensive instrumentations, which have significant contribution in the area of drug development, drug and biomolecule analysis. The developing new sensors for electrochemical analysis of these compounds have growing interest in recent years. Screen-printed based electrodes have a great interest in electrochemical analysis of various drugs and biomolecules due to their easy manufacturing procedure of the electrode allow the transfer of electrochemical laboratory experiments for disposable on-site analysis of some compounds. Paper based electrodes are also fabricated by new technology. They can be preferred due to their easy, cheap, portable, disposable, and offering high sensitivity properties for many application field such as environmental monitoring, food quality control, clinical diagnosis, drug, and biomolecules analysis. In this review, the recent electrochemical drug and biomolecule (DNA, RNA, µRNA, Biomarkers, etc.) studies will be presented that involve new trend disposable electrodes.
Collapse
Affiliation(s)
- Goksu Ozcelikay
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, Ankara, Turkey
| | - Leyla Karadurmus
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, Ankara, Turkey.,Department of Analytical Chemistry, Faculty of Pharmacy, Adıyaman University, Adıyaman, Turkey
| | - S Irem Kaya
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, Ankara, Turkey
| | - Nurgul K Bakirhan
- Department of Chemistry, Arts & Sciences Faculty, Hitit University, Corum, Turkey
| | - Sibel A Ozkan
- Department of Analytical Chemistry, Faculty of Pharmacy, Ankara University, Ankara, Turkey
| |
Collapse
|
20
|
Liu P, Ren Y, Ma J, Zhang Z, Song H, Yang T, Luo L, Wang X. Two different states conversion mechanism of the imprinting sites. J Colloid Interface Sci 2019; 539:235-244. [PMID: 30583203 DOI: 10.1016/j.jcis.2018.12.060] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/10/2018] [Revised: 12/08/2018] [Accepted: 12/15/2018] [Indexed: 11/18/2022]
Abstract
Bisphenol A molecular imprinted adsorbent (BMIA) was successfully synthesized by a sol-gel process and showed a good specific binding performance in the water. The further studies showed that the mass transfer process was controlled by in-diffusion, and the synthesis conditions would effect on the amount of imprinting sites. Scatchard model analysis evidenced that the high binding affinity sites and the low binding affinity sites were both on BMIA, and the high binding affinity sites played a key role in the specific binding process. Scatchard model analysis of temperature effect experiments and dosage effect experiments proved that the specific binding sites with high binding affinity and the unexpressed specific binding sites with low binding affinity were the two different states of the imprinting binding sites. The conversion between the two different states depended on the reaction driving force, and the increasing reaction driving force would increase the number of specific binding sites. Especially, the temperature showed a linear positive correlation with the amount of specific binding sites. Finally, a possible model was put forward to explain the two different states conversion mechanism of the imprinting sites.
Collapse
Affiliation(s)
- Pingxin Liu
- State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, PR China; School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Yueming Ren
- State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, PR China; School of Environment, Harbin Institute of Technology, Harbin 150090, PR China.
| | - Jun Ma
- State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, PR China; School of Environment, Harbin Institute of Technology, Harbin 150090, PR China.
| | - Zhongxiang Zhang
- State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, PR China; School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Haoran Song
- State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, PR China; School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Tao Yang
- State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, PR China; School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Lisha Luo
- State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, PR China; School of Environment, Harbin Institute of Technology, Harbin 150090, PR China
| | - Xiaowen Wang
- Yantai No.2 Middle School of Shandong Province, Yantai, Shandong 264003, PR China
| |
Collapse
|
21
|
Shevchenko N, Pankova G, Laishevkina S, Iakobson O, Koshkin A, Shabsels B. Core-shell polymer particles containing derivatives of 1,3-diphenyl-β-diketonate boron difluoride: synthesis and spectroscopic investigation of toluene vapor sorption. Colloids Surf A Physicochem Eng Asp 2019. [DOI: 10.1016/j.colsurfa.2018.11.051] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
|
22
|
Jiang L, Lu R, Ye L. Towards Detection of Glycoproteins Using Molecularly Imprinted Nanoparticles and Boronic Acid-Modified Fluorescent Probe. Polymers (Basel) 2019; 11:E173. [PMID: 30960157 PMCID: PMC6401722 DOI: 10.3390/polym11010173] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2018] [Revised: 01/07/2019] [Accepted: 01/11/2019] [Indexed: 12/26/2022] Open
Abstract
Glycoproteins represent a group of important biomarkers for cancer and other life-threatening diseases. Selective detection of specific glycoproteins is an important step for early diagnosis. Traditional glycoprotein assays are mostly based on lectins, antibodies, and enzymes, biochemical reagents that are costly and require special cold chain storage and distribution. To address the shortcomings of the existing glycoprotein assays, we propose a new approach using protein-imprinted nanoparticles to replace the traditional lectins and antibodies. Protein-imprinted binding sites were created on the surface of silica nanoparticles by copolymerization of dopamine and aminophenylboronic acid. The imprinted nanoparticles were systematically characterized by dynamic light scattering, scanning and transmission electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, and elemental analysis. A boronic acid-modified fluorescent probe was used to detect the target glycoprotein captured by the imprinted nanoparticles. Using horseradish peroxidase as a model glycoprotein, we demonstrated that the proposed method can be applied to detect target protein containing multiple glycosylation sites. Because of their outstanding stability and low cost, imprinted nanoparticles and synthetic probes are attractive replacements of traditional biochemical reagents to develop simpler, faster, and more cost-effective analytical methods for glycoproteins.
Collapse
Affiliation(s)
- Lingdong Jiang
- Division of Pure and Applied Biochemistry, Department of Chemistry, Lund University, Lund 22100 Sweden.
| | - Rui Lu
- Division of Pure and Applied Biochemistry, Department of Chemistry, Lund University, Lund 22100 Sweden.
- Jiangsu Key Laboratory of Chemical Pollution Control and Resources Reuse, School of Environmental and Biological Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.
| | - Lei Ye
- Division of Pure and Applied Biochemistry, Department of Chemistry, Lund University, Lund 22100 Sweden.
| |
Collapse
|
23
|
Tonucci MC, Fidélis ALS, Baeta BEL, Tarley CRT, de Aquino SF. Influence of synthesis conditions on the production of molecularly imprinted polymers for the selective recovery of isovaleric acid from anaerobic effluents. POLYM INT 2018. [DOI: 10.1002/pi.5726] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Marina C Tonucci
- Laboratório de Química Tecnológica e Ambiental (UFOP); Campus Universitário Morro do Cruzeiro; Ouro Preto MG Brazil
| | - Ana Luíza S Fidélis
- Laboratório de Química Tecnológica e Ambiental (UFOP); Campus Universitário Morro do Cruzeiro; Ouro Preto MG Brazil
| | - Bruno Eduardo L Baeta
- Laboratório de Química Tecnológica e Ambiental (UFOP); Campus Universitário Morro do Cruzeiro; Ouro Preto MG Brazil
| | - César Ricardo T Tarley
- Departamento de Química; Universidade Estadual de Londrina (UEL), Rodovia Celso Garcia Cid; Londrina PR Brazil
- Instituto Nacional de Ciência e Tecnologia em Bioanalítica (INCTBio), Universidade Estadual de Campinas (UNICAMP), Instituto de Química, Departamento de Química Analítica; Cidade Universitária Zeferino Vaz Campus; Campinas SP Brazil
| | - Sérgio F de Aquino
- Laboratório de Química Tecnológica e Ambiental (UFOP); Campus Universitário Morro do Cruzeiro; Ouro Preto MG Brazil
| |
Collapse
|
24
|
Panjan P, Monasterio RP, Carrasco-Pancorbo A, Fernandez-Gutierrez A, Sesay AM, Fernandez-Sanchez JF. Development of a folic acid molecularly imprinted polymer and its evaluation as a sorbent for dispersive solid-phase extraction by liquid chromatography coupled to mass spectrometry. J Chromatogr A 2018; 1576:26-33. [PMID: 30253912 DOI: 10.1016/j.chroma.2018.09.037] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/22/2018] [Revised: 06/06/2018] [Accepted: 09/17/2018] [Indexed: 10/28/2022]
Abstract
This work shows the development of a molecularly imprinted polymer to determine folic acid (FA) in food extracts by using dispersive solid-phase extraction and liquid chromatography coupled to mass spectrometry (LC-MS). Herewith, combinations of monomers (methacrylic acid (MAA), 4-vinylpyridine (4VPy) and vinylbenzyl trimethylammonium chloride (VBTMAC)) and crosslinkers (ethylene glycol dimethacrylate (EGDMA) and divinyl benzene (DVB)) were tested in appropriate solvents. Isotherm tests revealed that the MIP with the highest affinity was obtained by combining VBTMAC and EGDMA. Having checked the appropriate template-monomer-crosslinker ratio, the FA MIP was analyzed for its kinetic and equilibrium binding properties, proving very high affinity (more than 2.5 mmol g-1) and MIP/NIP ratio (up to 37). The FA MIP was used to selectively isolate the compound of interest from lettuce and cookies matrices using a dispersive solid-phase extraction protocol (which exhibited appropriate recovery and repeatability, ≥79.50% and ≤13.41 (%RSD in terms of area values), respectively, as well as absence of matrix effect); the resulting extracts were analyzed by a rapid and reliable LC-MS method.
Collapse
Affiliation(s)
- Peter Panjan
- Measurement Technology Unit (MITY), University of Oulu, Kajaani, Finland
| | - Romina P Monasterio
- Instituto de Biología Agrícola de Mendoza (IBAM), UNCuyo, CONICET. Alt. Brown 500, Chacras de Coria, Mendoza, Argentina
| | - Alegría Carrasco-Pancorbo
- Department of Analytical Chemistry, University of Granada, Avd. Fuentenueva s/n, 18071, Granada, Spain
| | | | - Adama M Sesay
- Measurement Technology Unit (MITY), University of Oulu, Kajaani, Finland.
| | - Jorge F Fernandez-Sanchez
- Department of Analytical Chemistry, University of Granada, Avd. Fuentenueva s/n, 18071, Granada, Spain; NanoMyP(®), Nanomateriales y Polimeros S.L, Spin-Off company of the UGR, BIC building, Avd. Innovacion 1, E-18016, Granada, Spain.
| |
Collapse
|
25
|
Shahar T, Feldheim G, Marx S, Mandler D. Core-shell nanoparticles for gas phase detection based on silver nanospheres coated with a thin molecularly imprinted polymer adsorbed on a chemiresistor. NANOSCALE 2018; 10:17593-17602. [PMID: 29896601 DOI: 10.1039/c8nr01437j] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
We present a novel gas phase detection prototype based on assembling core-shell nanospheres made of a silver core and coated with a molecularly imprinted polymer (MIP) adsorbed onto an interdigitated array (IDA) electrode chemiresistor (CR). The core-shell nanospheres, AgNP@MIPs, were imprinted with linalool, a volatile terpene alcohol, as a model system. The thickness of the MIP layer was tuned to a few nanometers to enable the facile ingress and egress of the linalool, as well as to enhance the electrical transduction through the Ag core. The AgNP@MIPs were spread onto the IDA-CR modified with various positively charged polymers, by drop casting and dip-coating. The AgNP@MIPs were characterized by various techniques such as extra high-resolution scanning and tunnelling electron microscopy and X-ray diffraction. The MIP recognition event was transduced into a measurable increase in the resistance. The response to linalool exposure and removal was fast and the device was fully recovered and could be reused. Finally, the difference in the resistance change between imprinted and non-imprinted nanospheres was substantial.
Collapse
Affiliation(s)
- Tehila Shahar
- Institute of Chemistry, The Hebrew University of Jerusalem, Jerusalem 9190401, Israel.
| | | | | | | |
Collapse
|
26
|
Cross-linked multilayer films deposited onto silica microparticles with tunable selectivity for anionic dyes. Colloids Surf A Physicochem Eng Asp 2018. [DOI: 10.1016/j.colsurfa.2017.10.021] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
|
27
|
Marć M, Kupka T, Wieczorek PP, Namieśnik J. Computational modeling of molecularly imprinted polymers as a green approach to the development of novel analytical sorbents. Trends Analyt Chem 2018. [DOI: 10.1016/j.trac.2017.10.020] [Citation(s) in RCA: 35] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
28
|
Płotka-Wasylka J, Marć M, Szczepańska N, Namieśnik J. New Polymeric Materials for Solid Phase Extraction. Crit Rev Anal Chem 2017; 47:373-383. [DOI: 10.1080/10408347.2017.1298987] [Citation(s) in RCA: 30] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
Affiliation(s)
- Justyna Płotka-Wasylka
- Department of Analytical Chemistry, Faculty of Chemistry, Gdansk University of Technology, Gdansk, Poland
| | - Mariusz Marć
- Department of Analytical Chemistry, Faculty of Chemistry, Gdansk University of Technology, Gdansk, Poland
| | - Natalia Szczepańska
- Department of Analytical Chemistry, Faculty of Chemistry, Gdansk University of Technology, Gdansk, Poland
| | - Jacek Namieśnik
- Department of Analytical Chemistry, Faculty of Chemistry, Gdansk University of Technology, Gdansk, Poland
| |
Collapse
|