Reduced graphene oxide/SnO2 nanocomposite on PET surface: Synthesis, characterization and application as an electro-conductive and ultraviolet blocking textile

Transparent Cellulose/Multi-Walled Carbon Nanotube Hybrids with Improved Ultraviolet-Shielding Properties Prepared from Cotton Textile Waste

Plastics offer many advantages and are widely used in various fields. Nevertheless, most plastics derived from petroleum are slow to degrade due to their stable polymer structure, posing serious threats to organisms and ecosystems. Thus, developing environmentally friendly and biodegradable plastics is imperative. In this study, biodegradable cellulose/multi-walled carbon nanotube (MCNT) hybrid gels and films with improved ultraviolet-shielding properties were successfully prepared using cotton textile waste as a resource. It was proven that MCNTs can be dispersed evenly in cellulose without any chemical or physical pretreatment. It was found that the contents of MCNTs had obvious effects on the structures and properties of hybrid films. Particularly, the averaged transmittance of cellulose/MCNT composite films in the range of 320-400 nm (T320-400) and 290-320 nm (T290-320) can be as low as 19.91% and 16.09%, when the content of MCNTs was 4.0%, much lower than those of pure cellulose films (T320-400: 84.12% and T290-320: 80.03%). Meanwhile, the water contact angles of the cellulose/MCNT films were increased by increasing the content of MCNTs. Most importantly, the mechanical performance of cellulose/MCNT films could be controlled by the additives of glycerol and MCNTs. The tensile strength of the cellulose/MCNT films was able to reach as high as 20.58 MPa, while the elongation at break was about 31.35%. To summarize, transparent cellulose/MCNT composites with enhanced ultraviolet-shielding properties can be manufactured successfully from low-cost cotton textile waste, which is beneficial not only in terms of environmental protection, but also the utilization of natural resources.

Incorporation of g-C3N4 nanosheets and CuO nanoparticles on polyester fabric for the dip-catalytic reduction of 4 nitrophenol

In the present work, we present the preparation of a new emerged heterogeneous catalyst (PE/g-C3N4/CuO) by in situ deposition of copper oxide nanoparticles (CuO) over the graphitic carbon nitride (g-C3N4) as the active catalyst and polyester (PE) fabric as the inert support. The synthesized sample (PE/g-C3N4/CuO) "dip catalyst" was studied by using various analytical techniques (Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy and dispersive X-ray spectroscopy (SEM/EDX), and transmission electron microscopy (TEM). The nanocomposite is utilized as heterogeneous catalysts for the 4-nitrophenol reduction in the presence of NaBH4, in aqueous solutions. According to experimental results, PE/g-C3N4/CuO with a surface of 6 cm2 (3 cm × 2 cm) demonstrated the catalyst exhibit excellent catalytic activity with 95% reduction efficiency for only 4 min of reaction and an apparent reaction rate constant (Kapp) of 0.8027 min-1. Further evidence that this catalyst based on prepared PE support can be a good contender for long-lasting chemical catalysis comes from the remarkable stability after 10 repetitions reaction cycles without a noticeably loss in catalytic activity. The novelty of this work consists to fabricate of catalyst based of CuO nanoparticles stabilized with g-C3N4 on the surface of an inert substrate PE, which results in an heterogenous dip-catalyst that can be easily introduced and isolated from the reaction solution with good retention of high catalytic performance in the reduction of 4-nitrophenol.

Self-Supporting g-C3N4 Nanosheets/Ag Nanoparticles Embedded onto Polyester Fabric as “Dip-Catalyst” for Synergic 4-Nitrophenol Hydrogenation

Herein, we report the design of a cost-effective catalyst with excellent recyclability, simple recuperation and facile recovery, and the examination between the reaction cycles via the development of self-supporting g-C3N4 nanosheets/Ag NPs polyester fabric (PES) using a simple, facile and efficient approach. PES fabrics were coated via a sono-coating method with carbon nitride nanosheets (GCNN) along with an in situ setting of Ag nanoparticles on PES coated GCNN surface producing PES-GCNN/Ag0. The elaborated textile-based materials were fully characterized using FTIR, 13C NMR, XRD, TGA, SEM, EDX, etc. Catalytic performance of the designed “Dip-Catalyst” demonstrated that the as-prepared PES-GCCN/Ag0 has effectively catalyzed the hydrogenation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the presence of NaBH4. The 3 × 3 cm2 PES-GCNN/Ag0 showed the best catalytic activity, displaying an apparent rate constant (Kapp) equal to 0.43 min−1 and more than 10 reusability cycles, suggesting that the prepared catalyst-based PES fabric can be a strong nominee for sustainable chemical catalysis. Moreover, the coated fabrics exhibited appreciable antibacterial capacity against Staphylococcus epidermidis (S. epidermidis) and Escherichia coli (E. coli). The present study opens up new opportunities for the future design of a low cost and large-scale process of functional fabrics.

MoS2 nanosheets/silver nanoparticles anchored onto textile fabric as "dip catalyst" for synergistic p-nitrophenol hydrogenation

Attaining a synergistic merge between the performance of homogenous catalysts and the recyclability of heterogeneous catalysts remains until now a concerning issue. The main challenge is to design efficient, low-cost catalyst with outstanding reusability, facile recovery, and ease of retrieval and monitoring between the reuses. Despite the vast efforts in the development of silver nanoparticle-based catalyst for the reaction of hydrogenation of 4-nitrophenol, the aforementioned criteria are infrequently found in a chosen system. Herein, we report a MoS₂ nanosheet/silver nanoparticle-anchored PES-based textile as an efficient and recyclable "dip catalyst" for the 4-NP hydrogenation in the presence of sodium bohydride as model reaction. The textile fabric-based catalyst was processed via a simple sono-coating approach using MoS₂ nanosheets as first coating layer followed by an in situ deposition of silver nanoparticles. The "dip catalyst" fabric is rapidly and easily removed from the reaction and then reinserted in the batch system to attain over 10 reaction cycles. Additionally, the produced textile materials were characterized via spectroscopic and microscopic tools such as FTIR, XRD, SEM, and EDX. Moreover, the sources of the high catalytic activity are also discussed and a plausible reaction mechanism is suggested. The present study demonstrates the potential of metal nanoparticle-textile material combination for future applications in chemical sustainable catalysis for environmental remediation purposes.

Preparation and Characterization of Poly-1,2,3-triazole with Chiral 2(5H)-Furanone Moiety as Potential Optical Brightening Agents

A series of novel heterocyclic polymers with fluorescent brightening properties are synthesized via Click polymerization. Fast synthesis of poly-1,2,3-triazoles (M n ≥ 9.31 kDa) is described herein, with a high yield of up to 95%. The Click polymerization approach has a number of advantages, including facile operation and outstanding isolation yield. The resultant polymers have a high thermal stability, excellent UV resistance, as well as acid and light fastness. On embedding with optical brightening agents, the polymers display strong fluorescent brightening properties in the tetrahydrofuran solution. Moreover, these products have a strong solution emission intensity and extraordinary photostability under UV light.