Different ionic liquid modified hypercrosslinked polystyrene resin for purification of catechins from aqueous solution

Solid Phase Extraction of (+)-Catechin from Cocoa Shell Waste Using Dual Ionic Liquid@ZIF8 Covered Silica

(+)-catechin is one category of flavonoids in cocoa shell waste and it has been reported to have many health benefits. In order to isolate it from aqueous extracted solution of cocoa shell waste by solid phase extraction (SPE), a series of dual ionic liquids@ZIF8-covered silica were prepared as the sorbents. Regarding the operation conditions of SPE and the characteristic structure of (+)-catechin, ZIF8-covered silica was synthesized to establish a stable and porous substrate, and various dual ionic liquids with multiple properties were immobilized on substrate to obtain a high adsorption capacity. Different adsorption conditions were investigated and the highest adsorption capacity (58.0 mg/g) was obtained on Sil@ZIF8@EIM-EIM at 30 °C during 60.0 min. When the sorbent was applied in the SPE process, 96.0% of the total amount of (+)-catechin from cocoa shell waste can be isolated after several washing and elution steps. The satisfactory recoveries of 97.5–100.2% and RSDs of 1.3–3.2% revealed that the SPE process was accurate and precise. The stability of Sil@ZIF8@EIM-EIM was tested in water and the reusability was tested using repeated adsorption/desorption process. The results revealed that Sil@ZIF8@EIM-EIM as an efficient sorbent can isolate (+)-catechin from cocoa shell waste.

Determination of phenols in natural and waste waters by capillary electrophoresis after preconcentration on magnetic nanoparticles coated with aminated hypercrosslinked polystyrene

An efficient sorbent for magnetic solid-phase extraction was developed from Fe₃ O₄ nanoparticles covered with aminated hypercrosslinked polystyrene. The sorbent has a saturation magnetization of 47 emu/g and a surface area of 509 mg/g and was tested for the extraction of 11 phenols from aqueous media. The optimum conditions were as follows: pH 3; adsorbent mass, 20.0 mg; adsorption time, 30 min; eluent (acetone) volume, 0.5 mL; and desorption time, 5 min. The enrichment factor after desorption reached 1595-1716 and the maximum adsorption capacity was 501-909 mg/g. Capillary electrophoresis was applied successively to separate 11 phenols after solid-phase extraction. The best separation was achieved using a fused silica capillary and borate buffer (pH 10.7) as a supporting electrolyte. After optimization, the linearity range was from 0.2 to 950 μg/L, and the limits of detection were 0.05-0.2 μg/L. The relative standard deviation varied from 6.1 to 8.7% (C = 1 μg/L) and from 2.9 to 3.5% (C = 500 μg/L). The determination of phenols is complicated in eutrophic water and spring water with a high content of humic and fulvic acids.

Optimization of Ultrasonic-Assisted Extraction and Purification of Zeaxanthin and Lutein in Corn Gluten Meal

Zeaxanthin and lutein have a wide range of pharmacological applications. In this study, we conducted systematic experimental research to optimize antioxidant extraction based on detection, extraction, process amplification, and purification. An ultrasonic-assisted method was used to extract zeaxanthin and lutein with high efficiency from corn gluten meal. Firstly, the effects of solid-liquid ratio, extraction temperature, and ultrasonic extraction time on the extraction of zeaxanthin were investigated in single-factor experiments. The optimization extraction parameters of zeaxanthin and lutein with ethanol solvent were obtained using the response surface methodology (RSM) as follows: liquid–solid ratio of 7.9:1, extraction temperature of 56 °C, and extraction time of 45 min. The total content of zeaxanthin and lutein was 0.501%. The optimum extraction experimental parameters were verified by process amplification, and we confirmed that the parameters of the extraction process optimized using the RSM design are reliable and precise. Zeaxanthin and lutein from crude extract of corn gluten were separated and purified using silica gel column chromatography with the purity of zeaxanthin increasing from 0.28% to 31.5% (about 110 times) and lutein from 0.25% to 16.3% (about 65 times), which could be used for large-scale industrial production of carotenoids.

Studies on the uptake of Am(III) and Eu(III) on ionic liquid modified polystyrene-divinyl benzene

Imidazolium bis(2-ethylhexyl)phosphate ionic liquid was anchored on a polystyrene-divinylbenzene (PS-DVB) copolymer and the product (R-Im-DEHP) was studied for the extraction of Am(III) and Eu(III) from dilute nitric acid medium to examine the feasibility using the anchored adsorbent for their mutual separation. The effect of various parameters such as the duration of equilibration, concentration of nitric acid, europium ion, and diethylenetriaminepentaacetic acid (DTPA) in aqueous phase on the distribution coefficient (K d) of Am(III) and Eu(III) was studied. The distribution coefficient of Am(III) and Eu(III) decreased with increase in the concentration of nitric acid. Rapid extraction of metal ions in the initial stages of equilibration followed by the establishment of equilibrium occurred within 4 h. The data on the rate of uptake of Am(III) and Eu(III) were fitted into pseudo-first order and pseudo-second order rate equation. The extraction isotherm was fitted to Langmuir and Freundlich adsorption models and the apparent europium extraction capacity was determined. The mechanism of extraction was elucidated and the conditions needed for efficient separation of Am(III) from Eu(III) was optimized using DTPA. The study indicated the possibility of using R-Im-DEHP for the separation of Eu(III) from Am(III) with high separation factors.