Dispersion stability of multi-walled carbon nanotubes in catanionic surfactant mixtures

Optimization of highly concentrated dispersions of multi-walled carbon nanotubes with emphasis on surfactant content and carbon nanotubes quality

Optimized multi-wall carbon nanotubes (MWNT) suspensions in aqueous solution have been obtained by joint use of ultrasonification and surfactant. A simple experimental procedure has been established to efficiently evaluate the dependence of the surfactant concentration on the MWNT concentration stable in suspension. The study of three different surfactants and MWNT provided by three suppliers showed that a threshold surfactant concentration exists above which the MWNT concentration is maximum. Furthermore, it is demonstrated that the maximum MWNT concentration achievable varies from 0.50 to 7.5 g l^-1 depending mainly on quality of the MWNT determined by raman spectroscopy analysis.

Micellar extraction with vesicle coated multi-walled carbon nanotubes to assist the dispersive micro-solid-phase extraction of natural phenols in Dendrobium

Here, catanionic surfactant vesicles were prepared by varying the types and compositions of anions and cations and the number of alkyl tails of the surfactants. The formed vesicles were employed to disaggregate and stabilize multiwalled carbon nanotubes bundles in aqueous solutions. Furthermore, the vesicle coated carbon nanotubes were used as the adsorbent in the dispersive micro-solid phase extraction. Additionally, micellar extraction was employed for the sample pre-extraction to avoid the use of toxic organic extraction solvents. The relative parameters that affect the extraction efficiency of targets were optimized using response surface methodology. Under the optimal microextraction conditions, the analytical performance of the established method was evaluated. The limits of detection (2.3-13 ng/mL) and quantification (7.6-42 ng/mL), inter- and intra- day precision (1.2-4.0 %, 2.0-5.0 %), and spiked recovery values (80-91 %) were obtained. The proposed method showed high sensitivity, precision and trueness. It was successfully applied to analyze phenols in Dendrobium genus samples.

Adsorption onto MWCNTs Coupled with Cloud Point Extraction for Dye Removal from Aqueous Solutions: Optimization by Experimental Design

AIMS

The main aim of the study was to examine the feasibility and benefits of adsorption onto multi-walled carbon nanotubes (MWCNTs) coupled with cloud point extraction (CPE) for the removal of Rhodamine B (RB) from aqueous solutions.

BACKGROUND

MWCNTs offer the particular features of the ideal adsorbents for the organic dyes such as hollow tubular structure and specific surface area. Nevertheless, they suffer from the drawbacks of low dispersion in the aqueous solutions and separation inconvenience from the media. Cloud point extraction, combined with the adsorption onto MWCNTs can be a promising method to overcome the problems.

OBJECTIVE

In the study, adsorption onto MWCNTs coupled with CPE was applied for RB removal from aqueous solutions. The process was optimized by the response surface modeling method. Moreover, the applicability of the proposed method in the real sample analyses was investigated.

METHODS

MWCNTs were used as adsorbent and Triton X-100 (TX-100) as the nonionic surfactant for CPE process. The experiments were carried out based on a Box-Behnken design (BBD) with the input variables of MWCNTs dosage (0.6-1.2 mg), solution pH (3-9), clouding time (20-40 min) and TX-100 concentration (10-20 v/v%) using 5 mg L-1 RB solutions.

RESULT

Regression analyses resulted in a statistically significant quadratic model (R2=0.9718, F=24.96, p<0.0001) by which the optimum levels of the variables were predicted as: MWCNTs dosage of 0.7 mg, pH=3, clouding time of 39.9 minutes and TX-100 concentration of 19.91% (v/v). The predicted conditions were experimentally validated by achieving an RB removal of 94.24%.

CONCLUSION

Based on the results, the combination of the environmentally friendly technique of CPE with adsorption onto MWCNTs allows the efficient removal of RB from water samples and the method can be effectively optimized by the response surface modeling.

Adsorption and reduction of Cr(VI) by hydroxylated multiwalled carbon nanotubes: effects of humic acid and surfactants

The present study investigated the impacts of humic acid (HA) and surfactants (SDBS and CTAB), which were ubiquitously found in the aquatic environments, on the removal of Cr(VI) by the hydroxylated MWCNTs-OH. The results showed that MWCNTs-OH could remove Cr(VI) from aqueous solution via adsorption coupled with reduction, and the kinetics followed the pseudo-first-order model with the rate of 3.5 × 10^-3 h^-1. In the presence of anionic SDBS, the removal percentage of Cr(VI) was greatly inhibited because the hydrophobic interaction and π-π interaction between SDBS and MWCNTs-OH surfaces not only decreased the adsorption sites for Cr(VI) but also made the surfaces more negatively charged. On the contrary, the existence of cationic CTAB could lead to the surfaces more positively charged, which consequently enhance the electrostatic attraction between Cr(VI) and the surfaces as well as the removal of Cr(VI). Noticeably, the presence of HA could promote the removal of Cr(VI), which was attributed to the reduction of Cr(VI) by the adsorbed HA. The ESR spectra indicated the existence of π-type radicals in HA structure and conduction electrons in MWCNTs-OH, and then the π-π interaction between MWCNTs-OH and adsorbed HA possibly increase the electron-donating ability of HA. Moreover, the promotive effect of HA could be enhanced with the addition of Ca²⁺. This study was helpful for us to understand the role of MWCNTs-OH in controlling the fate of Cr(VI) when HA and surfactants were present.

Stability issues and approaches to stabilised nanoparticles based drug delivery system

Nanoparticles form the fundamental building blocks for many exciting applications in various scientific disciplines due to its unique features such as large surface to mass ratio, targeting potential, ability to adsorbed and carry other compound which makes them suitable for biomedical applications. However, the problem of the large-scale synthesis of nanoparticles remains challenging due to physical instability associated with nanoparticles which lead to generation of aggregates particles with high polydispersity index (PDI) indicating low particle homogeneity and eventually loss of their special nanoscale properties. The stabilisation concept can be generated by repulsive electrostatic force, which nanoparticles experience, when they are surrounded by a double layer of electric charges. Selection of proper stabiliser will govern the stability of NPs and ultimately development of optimised drug delivery system. This review summarises mechanism of physical instability issues likely to be encountered during the development of nanoformulations. It also discusses potential stabilising agents used so far and their mechanism in achieving stable nanosystems.

Polyampholytic graft copolymers based on polydehydroalanine (PDha) – synthesis, solution behavior and application as dispersants for carbon nanotubes

We herein introduce a versatile platform of graft copolymers featuring a polyampholytic backbone and side chains of varying length and polarity using post-polymerization modification of polydehydroalanine (PDha).

Removal of ciprofloxacin from aqueous solutions by ionic surfactant-modified carbon nanotubes

Ionic surfactants may impact removal efficiency of organic contaminants from aqueous solution, but research regarding the adsorption mechanisms on surfactant-modified carbon nanotubes (CNTs) was limited. In this study, three multi-walled and one single-walled CNTs were used as adsorbents to investigate the adsorption behavior and mechanisms of ciprofloxacin (CIP) on CNTs modified by ionic surfactants (cationic CTAB (Cetyltrimethylamnonium bromide) or anionic SDS (Sodium dodecyl sulfate)). More than 80% (82-88%) of the total removed CIP on CTAB-modified CNTs occurred within the first 6 h, much higher than that on SDS-modified CNTs (57-78%). Modeling adsorption kinetics demonstrated that CIP adsorption on surfactant-modified CNTs was controlled by multiple and faster processes, and both external mass transfer and intraparticle diffusion are limiting factors. Relative to SDS, CTAB was significantly (P < 0.001) concentration-dependent in suppressing CIP removal. Besides, the increase in 1/n values of Freundlich model with increasing CTAB concentration suggested that CTAB could be a stronger competitor for CIP adsorption. Hydrophobic interactions predominated zwitterionic CIP adsorption on all CNTs tested, while electrostatic interactions could help control ionizable CIP adsorption on surfactant-modified CNTs depending upon pH. CIP adsorption on modified SWCNTs significantly declined with increasing ionic strength from 1 mM to 100 mM relative to those multi-walled CNTs because the more favorable aggregation of SWCNTs reduced the CIP adsorption, irrespective of which surfactant was added. Significant desorption hysteresis of adsorbed CIP released by SDS and water was observed, but not by CTAB, by which 32.6-54.4% of adsorbed CIP were removed. For SDS-modified CNTs, the mean release ratio (RR) followed an order of MWCNTs (0.075) > MHCNTs (0.058) > SWCNTs (0.057) > MCCNTs (0.049), significantly (P < 0.001) lower than CTAB-CNTs (0.37-0.56). It can be predicted that the tested surfactants co-existing with CNTs depress removal efficiency of diverse contaminants similar to CIP in aqueous systems.

A carefully designed nanoplatform based on multi walled carbon nanotube wrapped with aptamers

The interaction between carbon nanotubes (CNTs) and biological molecules of diagnostic and therapeutic interest, as well as the internalization of the CNTs-biomolecules complexes in different types of cell, has been extensively studied due to the potential use of these nanocomplexes as multifunctional nanoplatforms in a great variety of biomedical applications. The effective use of these nanobiotechnologies requires broad multidisciplinary studies of biocompatibility, regarding, for example, the in vitro and in vivo nanotoxicological assays, the capacity to target specific cells and the evaluation of their biomedical potential. However, the first step to be reached is the careful obtainment of the nanoplatform and the understanding of the actual surface composition and structural integrity of the complex system. In this work, we show the detailed construction of a nanoplatform created by the noncovalent interaction between oxidized multi walled carbon nanotubes (MWCNTs) and a DNA aptamer targeting tumor cells. The excess free aptamer was removed by successive washes, revealing the actual surface of the nanocomplex. The MWCNT-aptamer interaction by π-stacking was evidenced and shown to contribute in obtaining a stable nanocomplex compatible with aqueous media having good cell viability. The nucleotide sequence of the aptamer remained intact after the functionalization, allowing its use in further studies of specificity and binding affinity and for the construction of functional nanoplatforms.

Optimized dispersion quality of aqueous carbon nanotube colloids as a function of sonochemical yield and surfactant/CNT ratio

In this paper, we propose and verify a theoretical model of the development of dispersion quality of aqueous carbon nanotube (CNT) colloid as a function of sonochemical yield of the sonication process. Four different surfactants; Triton X-100, Pluronic F-127, CTAB and SDS were studied. From these four SDS had the lowest dispersion performance which was surprising. Optical dispersion quality results fits well with proposed theoretical model.

Inactivation of Laccase by the Attack of As (III) Reaction in Water

Laccase is a multicopper oxidase containing four coppers as reaction sites, including one type 1, one type 2, and two type 3. We here provide the first experimental data showing that As (III) can be effectively removed from water and transformed to As (V) through reactions mediated by laccase with the presence of oxygen. To this end, the As (III) removal, As (V) yields, total protein, active laccase, and copper concentrations in the aqueous phase were determined, respectively. Additionally, electron paramagnetic resonance spectra and UV-vis spectra were applied to probe possible structural changes of the laccase during the reaction. The data offer the first evidence that laccase can be inactivated by As (III) attack thus leading to the release of type 2 copper. The released copper has no reactivity with the As (III). These findings provide new ideas into a significant pathway likely to master the environmental transformation of arsenite, and advance the understanding of laccase inactivation mechanisms, thus providing a foundation for optimization of enzyme-based processes and potential development for removal and remediation of arsenite contamination in the environment.