A sensitive and selective colorimetric sensor for reduced glutathione detection based on silver triangular nanoplates conjugated with gallic acid

Ultrasonic-driven chemical reduction synthesis of alizarin complexone-modified gold nanoparticles for dual-signal colorimetric and fluorometric sensing of histamine in seafood products

Alizarin complexone-modified gold nanoparticles (Au0-NPsALz) were synthesized using a proposed ultrasonic irradiation-assisted chemical reduction method. Ultrasonic irradiation powers, reaction time and alizarin complexone concentration had been proven to be the main parameters for controlling the nucleation and growth of Au0-NPsALz. In the synthesized ultrasonic irradiation-assisted chemical reduction conditions, Au0-NPsALz had a spherical oriented morphology with a uniform size of 17.84 ± 1.37 nm and are shiny red with a surface plasmon resonance (SPR) of 535 nm. A rapid colorimetric and fluorometric dual-mode detection strategy for selective detection of histamine in seafood was developed based on the self-assembly of Au0-NPsALz-Ni (II) complexes. Ni (II) can capture the histamine molecules close to Au0-NPsALz surfaces, making changes in the colorimetric and fluorometric responses of the solution. The quantitative analysis of histamine was realized through the variation of dual-signal colorimetric and fluorometric responses. Such Au0-NPsALz sensor offered good detection sensitivity for histamine with a detection limit (LOD) of 59.32 μmol L-1 and 116.20 μmol L-1 and wide linear response within the range of 10-10000 μmol L-1 (R2 = 0.9952) and 100-5000 μmol L-1 (R2 = 0.9947) for colorimetric and fluorometric measurement, respectively. Recoveries ranging from 94.99 to 103.29 % and 97.67-106.88 % for colorimetric and fluorometric assay were obtained, showing low levels of matrix effects. Particularly, the results of the dual-mode sensor were also validated by comparing with the HPLC method for improving the assay accuracy and dependability. Ultimately, the developed Au0-NPsALz colorimetric and fluorometric probe performs excellently in practical applications, with promising results for detecting histamine in seafood products.

Bi-enzyme assay coupled with silver nanoplate transformation for insecticide detection

A novel colorimetric method utilizing a bi-enzyme assay using silver nanoplates (AgNPls) as a direct signal source was developed to enable rapid insecticide detection. This innovative system leverages the in situ generated H2O2 from the consecutive enzyme-catalyzed reactions of acetylcholine hydrolysis and choline oxidation to introduce oxidative etching of AgNPls, transforming them into aggregated silver nanospheres (AgNSs). The morphological transformation of silver nanoparticles could be observed with the naked eye due to the solution's color shifts from pink-violet to blue-violet. The presence of insecticide, i.e., dichlorvos (DDVP), could inhibit acetylcholinesterase activity, thereby limiting H2O2 production and affecting the transformation of AgNPls into aggregated AgNSs. Furthermore, the extent of AgNPl-to-aggregated AgNS transformation and the subsequent solution's color change was inversely proportional to the amount of DDVP. Under optimal conditions, the developed bi-enzyme assay enables the quantification of DDVP within 5 minutes, achieving detection limits of 0.5 ppm and 0.1 ppm by naked-eye detection and UV-visible spectrophotometry, respectively. Furthermore, the practical application of this assay was validated for detecting insecticides in real vegetable samples, demonstrating both accuracy and reliability.

SPE of gallic acid and ascorbic acid in fruits using polymerized deep eutectic solvent-modified substrate

Aim: Novel substrates were synthesized by porous and nonporous polymerization of deep eutectic solvents on magnetic silica nanoparticles and introduced for dispersive solid-phase extraction of two analytes. Materials & methods: The prepared substrates were characterized, and an extraction procedure was implemented to select the best substrates and eluent. The central composite design acted to optimize the effects of parameters that influenced the extraction efficiencies. Results: For gallic and ascorbic acids, the limits of detection were obtained at 0.136 and 0.165 μM, respectively, with linear ranges of 0.6-125.2 and 0.5-106.8 μM, respectively. Conclusion: The substrate produced good extractions even after being used three-times and was successfully applied for the analysis of real samples.

Rapid and sensitive determination of ascorbic acid based on label-free silver triangular nanoplates

In this study, a new method for the detection of ascorbic acid (AA) was proposed. It was based on the protective effect of AA on silver triangular nanoplates (Ag TNPs) against Cl- induced etching reactions. Cl- can attack the corners of Ag TNPs and etch them, causing a morphological shift from triangular nanoplates to nanodiscs. As a result, the solution changes color from blue to yellow. However, in the presence of AA, the corners of Ag TNPs can be protected from Cl- etching, and the blue color of the solution remains unchanged. Using this effect, a selective sensor was designed to detect AA in the range of 0-40.00 μM with a detection limit of 2.17 μM. As the concentration of AA varies in this range, color changes from yellow to blue can be easily observed, so the designed sensor can be used for colorimetric detection. This method can be used to analyze fruit juice samples.

New Chitosan-Grafted Thymol Coated on Gold Nanoparticles for Control of Cariogenic Bacteria in the Oral Cavity

Chitosan-grafted thymol (CST) coated on gold nanoparticles has been synthesized and characterized for the design of antimicrobial materials. CST was synthesized via adapting the Mannich reaction, and it acted as the capping agent for the synthesis of gold nanoparticles (AuNPs). The grafting of thymol onto the side chain of chitosan has provided a degree of substitution value (%DS_NMR) of 10.0%, calculated by nuclear magnetic resonance spectroscopy. UV-visible spectrometry and elemental analysis were used to confirm the successful synthesis of CST through adapting the Mannich reaction. The appropriate concentration of CST for AuNP synthesis was found to be 0.020%w/v. A red-wine colloidal AuNP solution of 2.41-3.30 nM particle size exhibits a strong surface plasmon resonance at 502 nm, which shows negative charges at pH = 9 of -36.37 mV. This result evidenced that the AuNPs showed electrostatic repulsion and CST played a role as a capping agent to provide a good dispersion and stability state. CST coated on the AuNP surface was successfully utilized for the control of cariogenic bacteria in the oral cavity. The results obtained from this study show that the tuning of the capping agent used in the synthesis step strongly influences the latter antimicrobial activity of the nanoparticles against Streptococcus mutans ATCC 25175 and Streptococcus sobrinus ATCC 33402 activity, with an inhibition zone of 15.90 and 14.25 mm, respectively. The average minimum inhibitory concentration values against S. mutans ATCC 25175 and S. sobrinus ATCC 33402 were found to be 25 and 100 mg/L, respectively, whereas the minimum bactericidal concentration values were 100 and 200 mg/L, respectively.

The Aggregation of Destabilized Ag Triangular Nanoplates and Its Application in Detection of Thiram Residues

An aggregation or assembly of Ag triangular nanoplates (Ag TNPs) can cause dramatic changes in their optical properties, which is widely used in applications in the field of sensing. The assembly forms of nanoparticles are crucial for obtaining sensitive sensing signals, but it is unknown what kind of assembly dominates the aggregated Ag TNPs in aqueous solutions. Herein, using thiram-induced Ag TNP aggregation as a model, six different assembly models were established, including three planar (side-by-side, side-to-tip, and tip-to-tip) assemblies and three tridimensional (plane-to-plane, plane-to-tip, and plane-to-side) assemblies. The corresponding optical properties were then investigated. Both theoretical and experimental findings indicate that three-dimensional assemblies, especially plane-to-plane assembly, dominate the Ag TNPs aggregation solution, causing a blue shift of the absorption spectrum. Analysis of charge distribution patterns in Ag TNPs indicates that such a blue shift is caused by the electrostatic repulsive force in plane-to-plane assembly. Thus, we propose a simple colorimetric method for thiram detection using Ag TNPs as an indicator. The method exhibits a selective and sensitive response to thiram with a limit of detection of 0.13 μM in the range of 0.2–0.5 μM, as well as excellent performance in real samples like wheat.

Recent advances in functionalization of plasmonic nanostructures for optical sensing

This review summarizes the progress that has been made in the use of nanostructured SPR-based chemical sensors and biosensors. Following an introduction into the field, a first large section covers principles of nanomaterial-based SPR sensing, mainly on methods using noble metal nanoparticles (spheres, cubes, triangular plates, etc.). The next section covers methods for functionalization of plasmonic nanostructures, with subsections on functionalization using (a) amino acids and proteins; (b) oligonucleotides, (c) organic polymers, and (d) organic compounds. Several tables are presented that give an overview on the wealth of methods and materials published. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. This review is not intended to be a comprehensive compilation of the literature in the field but rather is a systematic overview of the state of the art in surface chemistry of plasmonic nanostructures. The ability of various ligands and receptors for functionalization of nanoparticles as well as their sensing capability is discussed.

A simple and convenient dry-state SEIRS method for glutathione detection based on citrate functionalized silver nanoparticles in human biological fluids

Graphical representation for determination of glutathione using citrate functionalized AgNPs enriched dry-state SEIRS method.

Phytochemicals toward Green (Bio)sensing

Because of numerous inherent and unique characteristics of phytochemicals as bioactive compounds derived from plants, they have been widely used as one of the most interesting nature-based compounds in a myriad of fields. Moreover, a wide variety of phytochemicals offer a plethora of fascinating optical and electrochemical features that pave the way toward their development as optical and electrochemical (bio)sensors for clinical/health diagnostics, environmental monitoring, food quality control, and bioimaging. In the current review, we highlight how phytochemicals have been tailored and used for a wide variety of optical and electrochemical (bio)sensing and bioimaging applications, after classifying and introducing them according to their chemical structures. Finally, the current challenges and future directions/perspective on the optical and electrochemical (bio)sensing applications of phytochemicals are discussed with the goal of further expanding their potential applications in (bio)sensing technology. Regarding the advantageous features of phytochemicals as highly promising and potential biomaterials, we envisage that many of the existing chemical-based (bio)sensors will be replaced by phytochemical-based ones in the near future.

Highly Sensitive and Selective Colorimetric Sensor of Mercury (II) based on Layer-by-Layer Deposition of Gold/Silver Bimetallic Nanoparticles

A new colorimetric sensor based on gold/silver bimetallic nanoparticles (Au-Ag BNPs) for the sensitive and selective detection of mercury (II) was developed. Gold nanoparticles (AuNPs) were synthesized by Turkevich method. The surface modification of AuNPs was modified by the layer-by-layer technique using poly(diallyl dimethylammonium chloride) which provided positively charged of AuNPs. Negatively charged silver nanoparticles (AgNPs) were synthesized by chemical reduction using poly(4-styrenesulfonic acid-co-maleic acid) as the stabilizing agent. The layer-by-layer assembly deposition technique was used to prepare Au-Ag BNPs of positively and negatively charged of AuNPs and AgNPs, respectively. The synthesized Au-Ag BNPs were characterized by a UV-visible spectrophotometer, zeta potential analyzer, FT-IR, TEM, XRD, and EDX. The Au-Ag BNPs sensor was able to detect mercury (II) in aqueous solution, visibly changing from brownish-orange to purple. The linear relationships of the UV-visible spectrometry demonstrate that the Au-Ag BNPs-based colorimetric sensor can be used for the quantitative analysis of mercury (II) in the range of 0.5-80 mg L^-1, with the correlation coefficient, r² = 0.9818. The limit of detection (LOD) of mercury (II) was found to be 0.526 + 0.001 mg L^-1. The BNPs is also verified to have a good practical applicability for mercury (II) detection in the real samples.