Controllable thermochromic and phase transition behaviors of polydiacetylene/zinc(II) ion/zinc oxide nanocomposites via photopolymerization: An insight into the molecular level

Biomolecule-functionalized polydiacetylene assembly for visual and on-site sensing of (E)-2-hexenal in fruits

(E)-2-Hexenal (E2H) is an important volatile organic compound (VOC) that can serve as a marker for fruit quality sensing and shelf-life evaluation. However, visual and portable sensors for E2H have not been reported mainly because of the difficulty in selective response to E2H while avoiding interference from other VOC, especially isomers. Herein, we developed a novel colorimetric sensor based on thiol-functionalized polydiacetylene assembly (PDA-SH/PDA) for the quantitative and selectivity of E2H. The mechanism was that E2H underwent a Michael addition reaction with sulfhydryl groups in PDA-SH/PDA. The Michael addition reaction destroyed the hydrogen bond and distorted the conjugated molecular system, resulting in colorimetric responses. Under optimal conditions, a good linear relationship was observed between E2H concentration and red colorimetric shift (R2 = 0.9679). The E2H sensor yields a high analytical sensitivity of 1.5203% and a limit of detection of 0.015 g L-1. Besides, the PDA-SH/PDA sensor can be used to visually distinguish E2H and its isomer (Z)-3-hexenal. The PDA-SH/PDA sensor yielded a statistically significant difference in red colorimetric shift (p < 0.01) between the pairs of isomers in the ripeness of fruits. At last, the sensor was utilized for detecting E2H in grapes from different shelf lives. We found that the E2H concentration increased from 66.16 ± 1.54 to 67.56 ± 1.30 µg L-1 as storage time was prolonged. The results of this research not only demonstrated the feasibility of visual and on-site detection of E2H but also provided potential promise for portable fruit quality sensing and shelf-life evaluation.

Acid-responsive polydiacetylene-Na+ assemblies with unique red-to-blue color transition

Polydiacetylenes (PDAs), conjugated and stimuli-responsive polymers, are of interest for colorimetric sensing technologies. Commercially available PDAs with carboxylic headgroup do not show any colorimetric response to acid. To achieve acid-responsive property, the headgroups of PDAs are often modified with some functional moieties, involving complicated synthetic processes. This contribution presents a facile approach to develop acid-responsive materials via co-assembly of PDA and excess sodium hydroxide (NaOH). After low-temperature incubation and photopolymerization, the mixtures of 10,12-tricosadiynoic acid (TCDA) and NaOH develop into red-phase poly (TCDA-Na+) assemblies. A unique red-to-blue color transition occurs when the poly (TCDA-Na+) assemblies are exposed to hydrogen chloride (HCl) acid both in aqueous solution and gas phase. Increasing the concentrations of NaOH and TCDA monomer during the self-assembly process affects the molecular organization and morphologies of the resultant poly (TCDA-Na+) assemblies, which in turn govern the sensitivity to acid. The results of this study offer a simple and inexpensive method for developing acid-responsive PDAs, extending their colorimetric sensing applications.

Colorimetric response in polydiacetylene at the single domain level using hyperspectral microscopy

The structural variance of polydiacetylene (PDA) at the nanoscale level, even under the same fabrication conditions, is one of the origins of its poor reproducibility in chemo/biosensing. In this work, we present a spatial map of such structural distributions within a single crystal by taking advantage of the recent development of hyperspectral microscopy at visible wavelengths. Hyperspectral microscopy provides the distribution of absorption spectra at the spatial resolution of standard optical microscopy. By tracking the blue-to-red transition via this technique, we found that heat or pH stimulation leaves a unique pattern in the transition pathways.

Amide-Assisted Polymerization of 1,3-Butadiyne Containing Thiolate Ligands on Small Gold Nanoparticles

Incorporation of directing amide groups has been shown to facilitate the topochemical polymerization of 1,3-butadiyne (diacetylene) groups in noncrystalline phases such as gels, amorphous solids, and liquid crystals. It remains challenging to polymerize 1,3-butadiyne-containing alkylthiolate ligands within their self-assembled monolayers on gold nanoparticles (AuNPs), which enhances their stability and adds new optical and electronic properties. Especially smaller AuNPs of sizes below 5 nm in diameter have been reported to display sluggish photopolymerization and are susceptible to photodegradation under UV irradiation. To probe the effectiveness of the amide-directed photopolymerization of 1,3-butadiyne ligands, small AuNPs in the 2-4 nm range were synthesized that contain alkylthiolate ligands with and without amide and 1,3-butadiyne groups. Their photopolymerization and photostability were studied by transmission electron microscopy (TEM), UV-vis spectroscopy, and Raman spectroscopy. AuNP with amide-free 1,3-butadiyne ligands templated the polymerization of the 1,3-butadiyne ligands but fused to large and insoluble particles during the polymerization process. AuNPs with ligands containing both 1,3-butadiyne and amide groups polymerized significantly faster, which slowed down photodegradation. A UV irradiation (254 nm and 176 W/m²) for 5-10 min was found to be optimal for the AuNPs with directing amide groups studied here, although their average core sizes grew from 3.8 to 4.0 nm in diameter and about 20% of the attached 1,3-butadiyne ligands remained unreacted after 10 minutes of irradiation. About 75% of the attached 1,3-butadiyne ligands were already polymerized during the first 5 min of UV irradiation. This decrease in reactivity is reasoned with a fast polymerization of ligands attached to facet sites and slower polymerization rates for ligands attached to edge and corner sites. Unexpectedly, photopolymerization occurred only in the presence of solvent, whereas no polydiacetylene was generated when dry powders of any of the diacetylene-containing gold nanoparticles were irradiated.

Structures and strategies for enhanced sensitivity of polydiacetylene(PDA) based biosensor platforms

Polydiacetylene (PDA) is a versatile polymer that has been studied in numerous fields because of its unique optical properties derived from alternating multiple bonds in the polymer backbone. The conjugated structure in the polymer backbone enables PDA to possess the ability of blue-red colorimetric transition when π-π interactions in the PDA backbone chain are disturbed by the external environment. The chromatic property of PDA disturbed by external stimuli can also emit fluorescence in the red region. Owing to the unique characteristics of PDA, it has been widely studied in facile and label-free sensing applications based on colorimetric or fluorescence signals for several decades. Among the various PDA structures, membrane structures assembled by amphiphilic molecules are widely used as a versatile platform because facile modification of the synthetic membrane provides extensive applications, such as receptor-ligand interactions, resulting in potent biosensors. To use PDA as a sensory material, several methods have been studied to endow the specificity to PDA molecules and to amplify the signal from PDA supramolecules. This is because selective and sensitive detection of target materials is required at an appropriate level corresponding to each material for applicable sensor applications. This review focuses on factors that affect the sensitivity of PDA composites and several strategies to enhance the sensitivity of the PDA sensor to various structures. Owing to these strategies, the PDA sensor system has achieved a higher level of sensitivity and selectivity, enabling it to detect multiple target materials for a full field of application.

Alkali Metal Salts of 10,12-Pentacosadiynoic Acid and Their Dosimetry Applications

Wide-dose-range 2D radiochromic films for radiotherapy, such as GAFchromic EBT, are based on the lithium salt of 10,12-pentacosadiynoic acid (Li-PCDA) as the photosensitive component. We show that there are two solid forms of Li-PCDA-a monohydrated form A and an anhydrous form B. The form used in commercial GAFchromic films is form A due to its short needle-shaped crystals, which provide favorable coating properties. Form B provides an enhanced photoresponse compared to that of form A, but adopts a long needle crystal morphology, which is difficult to process. The two forms were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, CP-MAS ¹³C solid-state NMR spectroscopy, and thermogravimetric analysis. In sum, these data suggest a chelating bridging bidentate coordination mode for the lithium ions. The sodium salt of PCDA (Na-PCDA) is also reported, which is an ionic cocrystal with a formula of Na⁺PCDA^-·3PCDA. The PCDA and PCDA^- ligands display monodentate and bridging bidentate coordination to the sodium ion in contrast to the coordination sphere of the Li-PCDA forms. In contrast to its lithium analogues, Na-PCDA is photostable.

Naked-Eye Detection of Ethylene Using Thiol-Functionalized Polydiacetylene-Based Flexible Sensors

Ethylene is a hormone that plays a critical role in many phases of plant growth and fruit ripening. Currently, detection of ethylene heavily relies on sophisticated and time-consuming conventional assays such as chromatography, spectroscopy, and electrochemical methods. Herein, we develop a polydiacetylene-based sensor for the detection of ethylene via color change. The sensors are prepared through the reaction between polydiacetylene and Lawesson's reagent that results in decorating polydiacetylene with terminal thiol groups. Upon exposure to ethylene, the sensor changes color from blue to red which is visible to the naked eye. Our device shows a limit of detection for ethylene at 600 ppm in air and can be applied for monitoring ethylene released during the fruit-ripening process. Such easy-to-use ethylene sensors may find applications in plant biology, agriculture, and food industry.