Preparation and characterization of perfluorocarbon microbubbles using Shirasu Porous Glass (SPG) membranes

Advancing nanobubble technology for carbon-neutral water treatment and enhanced environmental sustainability

Gaseous nanobubbles (NBs) with dimensions ranging from 1 to 1000 nm in the liquid phase have garnered significant interest due to their unique physicochemical characteristics, including specific surface area, low internal gas pressure, long-term stability, efficient mass transfer, interface potential, and free radical production. These remarkable properties have sparked considerable attention in the scientific community and industries alike. These hold immense promise for environmental applications, especially for carbon-neutral water remediation. Their long-lasting stability in aqueous systems and efficient mass transfer properties make them highly suitable for delivering gases in the vicinity of pollutants. This potential has prompted research into the use of NBs for targeted delivery of gases in contaminated water bodies, facilitating the degradation of harmful substances and advancing sustainable remediation practices. However, despite significant progress in understanding NBs physicochemical properties and potential applications, several challenges and knowledge gaps persist. This review thereby aims to summarize the current state of research on NBs environmental applications and potential for remediation. By discussing the generation processes, mechanisms, principles, and characterization techniques, it sheds light on the promising future of NBs in advancing environmental sustainability. It explores their role in improving oxygenation, aeration, and pollutant degradation in water systems. Finally, the review addresses future research perspectives, emphasizing the need to bridge knowledge gaps and overcome challenges to unlock the full potential of this frontier technology for enhanced environmental sustainability.

Sustainable production of porous chitosan microparticles by energy-efficient membrane emulsification

In drug delivery, it is common to use porous particles as carrier media, instead of dense particles, due to their high specific surface area and available entrapment volume, which allows a higher amount of drug to be encapsulated and then released. Chitosan microparticles are extensively used in drug delivery, but porous chitosan microparticles are scarcely reported. In this work, the preparation of porous chitosan microparticles using membrane emulsification is addressed, a technology that involves mild operating conditions and less energy consumption than traditional methods (such as ultrasound), and with higher control of the particle size. The dense structure is obtained by a water-in-oil emulsion. The porous structure is obtained by a gas-in-water-in-oil G/W/O double emulsion, where argon bubbles get entrapped in an aqueous chitosan solution that is further emulsified in a paraffin/petroleum ether mixture. Porous chitosan particles were obtained with sizes of 7.7 ± 1.6 μm, which was comparable with dense chitosan particles (6.2 ± 2.3 μm). The pore structure was optimized by varying the argon flow rate, being optimized at 0.24 L h-1. The impact of drug loading by adsorption or encapsulation, and of the drug release behaviour when using porous and dense particles were assessed, using the protein bovine serum albumin (BSA) as a model drug. The results showed that by encapsulating BSA the loading efficiency was above 95 % for both types of particles, with the release being slightly slower for the dense particles. As for the adsorbed BSA, the loading efficiency was significantly higher for porous particles - 70 % - against the 40 % for dense particles. Porous chitosan particles were successfully obtained using the membrane emulsification technology and showed that these carriers are advantageous regarding drug loading and release.

Ultrasound-responsive microbubbles and nanodroplets: A pathway to targeted drug delivery

Ultrasound-responsive agents have shown great potential as targeted drug delivery agents, effectively augmenting cell permeability and facilitating drug absorption. This review focuses on two specific agents, microbubbles and nanodroplets, and provides a sequential overview of their drug delivery process. Particular emphasis is given to the mechanical response of the agents under ultrasound, and the subsequent physical and biological effects on the cells. Finally, the state-of-the-art in their pre-clinical and clinical implementation are discussed. Throughout the review, major challenges that need to be overcome in order to accelerate their clinical translation are highlighted.

Industrial application of microbubble generation methods for recovering fine particles through froth flotation: A review of the state-of-the-art and perspectives

The depletion of high-grade and coarse-grain ores has led to an increasing demand for the development of efficient separation technologies for low-grade and fine-grain ores. However, conventional froth flotation techniques are not adequate to efficiently recover fine and ultrafine particles (typically <10-15 μm) due to the low collision probability between these particles and the relatively large bubbles used in the process. The introduction of microbubbles has shown promise in enhancing particle recovery, making it a subject of significant interest. Thus, this review focuses on microbubble generation methods that have the potential to be scaled up for industrial applications, with a specific emphasis on their suitability for froth flotation. The methods are categorized based on their scalability: high-hydrodynamic cavitation, porous media/medium-dissolved air, electrolysis/low-microfluidics, and acoustic methods. The bubble generation mechanisms, characteristics, advantages and limitations of each method and its applications in froth flotation are discussed to provide suggestions for improvement. There is still no appropriate technology that can optimize bubble size distribution, production rate and cost together for industrial froth flotation application. Therefore, novel approaches of combining multiple methods are also explored to achieve the potential synergic effects. By addressing the limitations of current microbubble generation methods and proposing potential enhancements, this review aims to contribute to the development of efficient and cost-effective microbubble generation technologies for fine and ultrafine particles in the froth flotation industry.

High-Throughput Microfluidic Production of Droplets and Hydrogel Microspheres through Monolithically Integrated Microchannel Plates

In this paper, we present a highly effective microfluidic emulsion system using an integrated microchannel plate (MCP), a porous glass membrane that is readily available and densely packs millions of through-microchannels, for high-throughput production of monodisperse droplets. The physical controls of droplet formation, including viscosity, flow rate, and pore size, have been extensively explored for optimum emulsification conditions. The performance of the device has been validated where monodisperse droplets with a narrow coefficient of variance (<5%) can be achieved at a dispersed phase flux of 3 mL h-1 from a piece of 4 × 4 mm2 MCP. The average droplet size is two times the nominal membrane pore diameter and thus can be easily controlled by choosing the appropriate membrane type. The preparation of hydrogel microspheres has also been demonstrated with a high throughput of 1.5 × 106 particles min-1. These microspheres with a uniform size range and rough surface morphology provide suitable bioenvironments and serve as ideal carriers for cell culture. Mouse fibroblasts are shown to be cultured on these 3D scaffolds with an average cell viability of over 96%. The cell attachment rate can reach up to 112 ± 7% in 24 h and the proliferation ability increases with the number of culture days. Furthermore, the device has been applied in the droplet digital polymerase chain reaction for absolute quantification of lung cancer-related PLAU genes. The detection limit achieved was noted to be 0.5 copies/μL with a dynamic range of 105 ranging from 1 × 102 to 1 × 106 copies/μL. Given the easy fabrication, robust performance, and simple operation, the emulsion system sets the stage for the laboratory's droplet-based assays and applications in tissue engineering.

A Perfluorocarbon-Coated ZrP Cation Exchanger with Excellent Ammonium Selectivity and Chemical Stability: An Oral Sorbent for End-Stage Kidney Disease (ESKD)

An oral sorbent to remove NH₄⁺ within the small intestine of end-stage kidney disease (ESKD) patients could reduce blood urea levels and diminish their dialysis treatment burden. But current sorbent materials like amorphous zirconium phosphate particles Zr(HPO₄)₂·H₂O (ZrP) lack the selectivity to remove NH₄⁺ in water solution with other competing ions. Our previous work found that a gas-permeable, hydrophobic polydimethylsiloxane (PDMS) coating on ZrP improved the material's selectivity for NH₄⁺. However, a competing ion Ca²⁺ was still removed by PDMS-coated ZrP sorbent, and the permeability of the PDMS coating to Ca²⁺ was increased after low-pH stomach-like condition exposure. An alternative hydrophobic and gas permeable coating has been investigated─perfluorooctyltriethoxysilane (FOTS). The coating was attached in place of PDMS to a tetraethyl orthosilicate-coated ZrP surface. Surface atomic composition analysis and scanning electron microscopy observation verified the successful application of the FOTS coating. Water contact angle analysis validated the FOTS coating was hydrophobic (145.0 ± 3.2°). In vitro competing ion studies indicated the FOTS coating attached to ZrP increased NH₄⁺ removal by 53% versus uncoated ZrP. FOTS offers complete selectivity for NH₄⁺ over Ca²⁺ with similar NH₄⁺ capacity as the previous PDMS coating. Moreover, FOTS-coated ZrP maintained NH₄⁺ removal capacity and selectivity after the acid exposure study, indicating excellent acid resistance while NH₄⁺ selectivity of ZrP-PDMS decreased by 72%. The results suggested that FOTS-coated ZrP is promising as an oral sorbent for ESKD patients.

Microbubble Delivery Platform for Ultrasound-Mediated Therapy in Brain Cancers

The blood-brain barrier (BBB) is one of the most selective endothelial barriers that protect the brain and maintains homeostasis in neural microenvironments. This barrier restricts the passage of molecules into the brain, except for gaseous or extremely small hydrophobic molecules. Thus, the BBB hinders the delivery of drugs with large molecular weights for the treatment of brain cancers. Various methods have been used to deliver drugs to the brain by circumventing the BBB; however, they have limitations such as drug diversity and low delivery efficiency. To overcome this challenge, microbubbles (MBs)-based drug delivery systems have garnered a lot of interest in recent years. MBs are widely used as contrast agents and are recently being researched as a vehicle for delivering drugs, proteins, and gene complexes. The MBs are 1-10 μm in size and consist of a gas core and an organic shell, which cause physical changes, such as bubble expansion, contraction, vibration, and collapse, in response to ultrasound. The physical changes in the MBs and the resulting energy lead to biological changes in the BBB and cause the drug to penetrate it, thus enhancing the therapeutic effect. Particularly, this review describes a state-of-the-art strategy for fabricating MB-based delivery platforms and their use with ultrasound in brain cancer therapy.

Adsorption of perfluoroalkyl acids on granular activated carbon supported chitosan: Role of nanobubbles

The safety threat posed by Perfluoroalkyl acids (PFAAs) in drinking water is a growing concern. In this study, we loaded chitosan (CS) on granular activated carbon (GAC) to adsorb PFAAs, and we explored the role of nanobubbles in the adsorption process through experiments and density functional theory (DFT) calculations. Compared with GAC, we found that the use of the composite adsorbent (CS/GAC) enhanced the removal rate of perfluorooctanoic acid by 136% with the assistance of nanobubbles. PFAAs with different chain lengths have different adsorption mechanisms owing to surface activity differences. PFAAs with longer C-F chains can be directly enriched with amino groups on the CS or air-water interface on composite adsorbents. Additionally, PFAAs can be enriched with nanobubbles in solution to form nanobubble-PFAA colloids, which are adsorbed by protonated amino groups on CS through electrostatic interactions. We found that PFAAs with shorter C-F chains are less affected by nanobubbles, and DFT calculations indicated that the adsorption of short-chain PFAAs is mainly affected by electrostatic interactions. We also proved that the electrostatic interactions between CS and PFAAs are mainly derived from the abundant protonated amino groups.

Thermal Analysis Tools for Physico-Chemical Characterization and Optimization of Perfluorocarbon Based Emulsions and Bubbles Formulated for Ultrasound Imaging

Self-emulsifying microbubbles, especially designed to increase the contrast of ultrasound images by the inclusion of perfluorocarbon molecules, have been studied by thermal analysis techniques. The microbubbles were made of a blend of gas (20%), surfactants (50%) and water (30%). The surfactants were mixtures of polysorbate-85, Span-80, poloxamer 188, glycerol and fluorinated surfactant (Zonyl®). Microbubbles have been characterized by means of diffusion light scattering and optical imaging. The effect of Zonyl® on encapsulation rate, as well as gas vaporization temperature and gas release temperature, has been assessed by means of Differential Scanning Calorimetry (DSC) and Thermogravimetric Analyses (TGA). Microscopy and laser granulometry techniques have been also carried out for each formulation in order to determine the number of microbubbles and their size, respectively. Moreover, stability of the emulsions has been evaluated by DSC and confronted with the results obtained from the ultrasound experiments. Average microbubble concentrations of 7.2 × 107 and 8.9 × 107 per mL were obtained for perfluorohexane and perfluoropentane based emulsions, respectively. The present study demonstrates that the amount of encapsulated perfluorocarbon increases and the gas evaporation temperature decreases with the concentration of Zonyl®. Furthermore, the best ultrasound contrast images have been obtained in vitro with the samples containing the lowest Zonyl® concentration. An explication regarding the role of Zonyl® in the emulsion/microbubbles preparations is proposed here in order to optimize self-emulsifying microbubble formulation for pharmaceutical development.