Fabrication and stability investigation of bio-inspired superhydrophobic surface on nitinol alloy

Bioinspired and Multifunctional Tribological Materials for Sliding, Erosive, Machining, and Energy-Absorbing Conditions: A Review

Friction, wear, and the consequent energy dissipation pose significant challenges in systems with moving components, spanning various domains, including nanoelectromechanical systems (NEMS/MEMS) and bio-MEMS (microrobots), hip prostheses (biomaterials), offshore wind and hydro turbines, space vehicles, solar mirrors for photovoltaics, triboelectric generators, etc. Nature-inspired bionic surfaces offer valuable examples of effective texturing strategies, encompassing various geometric and topological approaches tailored to mitigate frictional effects and related functionalities in various scenarios. By employing biomimetic surface modifications, for example, roughness tailoring, multifunctionality of the system can be generated to efficiently reduce friction and wear, enhance load-bearing capacity, improve self-adaptiveness in different environments, improve chemical interactions, facilitate biological interactions, etc. However, the full potential of bioinspired texturing remains untapped due to the limited mechanistic understanding of functional aspects in tribological/biotribological settings. The current review extends to surface engineering and provides a comprehensive and critical assessment of bioinspired texturing that exhibits sustainable synergy between tribology and biology. The successful evolving examples from nature for surface/tribological solutions that can efficiently solve complex tribological problems in both dry and lubricated contact situations are comprehensively discussed. The review encompasses four major wear conditions: sliding, solid-particle erosion, machining or cutting, and impact (energy absorbing). Furthermore, it explores how topographies and their design parameters can provide tailored responses (multifunctionality) under specified tribological conditions. Additionally, an interdisciplinary perspective on the future potential of bioinspired materials and structures with enhanced wear resistance is presented.

Effective adsorption of Pb(ii) from wastewater using MnO2 loaded MgFe-LD(H)O composites: adsorption behavior and mechanism

Pb(ii) adsorption by MnO₂/MgFe-layered double hydroxide (MnO₂/MgFe-LDH) and MnO₂/MgFe-layered metal oxide (MnO₂/MgFe-LDO) materials was experimentally studied in lab-scale batches for remediation property and mechanism analysis. Based on our results, the optimum adsorption capacity for Pb(ii) was achieved at the calcination temperature of 400 °C for MnO₂/MgFe-LDH. Langmuir and Freundlich adsorption isotherm models, pseudo-first-order and pseudo-second-order kinetics, Elovich model, and thermodynamic studies were used for exploring the Pb(ii) adsorption mechanism of the two composites. In contrast to MnO₂/MgFe-LDH, MnO₂/MgFe-LDO_{400 °C} has a stronger adsorption capacity and the Freundlich adsorption isotherm model (R² > 0.948), the pseudo-second-order kinetic model (R² > 0.998), and the Elovich model (R² > 0.950) provide great fits to the experimental data, indicating that the adsorption occurs predominantly via chemisorption. The thermodynamic model suggests that MnO₂/MgFe-LDO_{400 °C} is spontaneously heat-absorbing during the adsorption process. The maximum adsorption capacity of MnO₂/MgFe-LDO_{400 °C} for Pb(ii) was 531.86 mg g^-1 at a dosage of 1.0 g L^-1, pH of 5.0, and temperature of 25 °C. Through characterization analysis, the main mechanisms involved in the adsorption process were precipitation action, complexation with functional groups, electrostatic attraction, cation exchange and isomorphic replacement, and memory effect. Besides, MnO₂/MgFe-LDO_{400 °C} has excellent regeneration ability in five adsorption/desorption experiments. The above results highlight the powerful adsorption capacity of MnO₂/MgFe-LDO_{400 °C} and may inspire the development of new types of nanostructured adsorbents for wastewater remediation.

Investigation of Effects of Acid, Alkali, and Salt Solutions on Fluorinated Superhydrophobic Surfaces

Extensive studies have been carried out to investigate the stability of superhydrophobic surfaces under acid, alkali, and salt solutions. It is noted that previous literature studies just demonstrated a variety of experimental phenomena. However, very few works have focused on the protection mechanism or failure mechanism of fluorinated superhydrophobic surfaces from the perspective of chemical aspects. Herein, this paper aims to investigate the effects of acid, alkali, and salt solutions on the stability of fluorinated superhydrophobic surfaces, and the anticorrosion/corrosion mechanism will be further proposed. The superhydrophobic coating was obtained on silicon substrates by laser surface texturing followed by fluoroalkyl silane modification. The resultant surfaces presented a water contact angle (WCA) of 157.6 ± 0.4° with a small water sliding angle (WSA) of 1.3 ± 0.3°. The newly fabricated superhydrophobic surfaces were then immersed in different concentrations of corrosive solutions (acid, alkali, and salt solutions). The revolution of surface wettability and surface morphology on treated silicon surfaces was evaluated through WCAs, scanning electron microscopy, and white light confocal microscopy. The results indicate that the hydrogen ions (H⁺) played a positive role in the retention of superhydrophobicity. However, the hydroxyl (OH^-) and chloride ions (Cl^-) presented the negative influence. The protection mechanism or corrosion mechanism under different solutions was proposed based on the X-ray photoelectron spectroscopy results. In addition, the potentiodynamic polarization and electrochemical impedance spectroscopy measurements provided strong support in data and were conducted to verify the rationality of the proposed mechanism.

Droplet Impact on the Super-Hydrophobic Surface with Micro-Pillar Arrays Fabricated by Hybrid Laser Ablation and Silanization Process

A super-hydrophobic aluminum alloy surface with decorated pillar arrays was obtained by hybrid laser ablation and further silanization process. The as-prepared surface showed a high apparent contact angle of 158.2 ± 2.0° and low sliding angle of 3 ± 1°. Surface morphologies and surface chemistry were explored to obtain insights into the generation process of super-hydrophobicity. The main objective of this current work is to investigate the maximum spreading factor of water droplets impacting on the pillar-patterned super-hydrophobic surface based on the energy conservation concept. Although many previous studies have investigated the droplet impacting behavior on flat solid surfaces, the empirical models were proposed based on a few parameters including the Reynolds number (Re), Weber number (We), as well as the Ohnesorge number (Oh). This resulted in limitations for the super-hydrophobic surfaces due to the ignorance of the geometrical parameters of the pillars and viscous energy dissipation for liquid flow within the pillar arrays. In this paper, the maximum spreading factor was deduced from the perspective of energy balance, and the predicted results were in good agreement with our experimental results with a mean error of 4.99% and standard deviation of 0.10.