La2O3-CuO2/CNTs electrode with excellent electrocatalytic oxidation ability for ceftazidime removal from aqueous solution

Efficient electrochemical degradation of ceftazidime by Ti3+ self-doping TiO2 nanotube-based Sb-SnO2 nanoflowers as an intermediate layer on a modified PbO2 electrode

Ceftazidime (CAZ) is an emerging organic pollutant with a long-lasting presence in the environment. Although some PbO2 materials exhibit degradation capabilities, inefficient electron transport in the substrate layer and the problem of electrode stability still limit their use. Here, an interfacial design in which TiO2 nanotube arrays generate Ti3+ self-doping oxide substrate layers and highly active 3D Sb-SnO2 nanoflowers-like interlayers was used to prepare PbO2 anodes for efficient degradation of CAZ. Interestingly, after implementing Ti3+ self-doping in the PbO2 anode base layer and introducing 3D nanoflowers-like structures, the capacity for •OH generation increased significantly. The modified electrode exhibited 5-fold greater •OH generation capacity compared to the unmodified electrode, and a 2.7-fold longer accelerated electrode lifetime. The results indicate that interfacial engineering of the base and intermediate layers of the electrodes can improve the electron transfer efficiency, promote the formation of •OH, and extend the anode lifetime of the activated CAZ system.

Catalytic electrodes' characterization study serving polluted water treatment: environmental healthcare and ecological risk assessment

Pesticide residues in the environment have irreparable effects on human health and other organisms. Hence, it is necessary to treat and degrade them from polluted water. In the current work, the electrochemical removal of the fenitrothion (FT), trifluralin (TF), and chlorothalonil (CT) pesticides were performed by catalytic electrode. The characteristics of SnO2-Sb2O3, PbO2, and Bi-PbO2 electrodes were described by FE-SEM and XRD. Dynamic electrochemical techniques including cyclic voltammetry, electrochemical impedance spectroscopy, accelerated life, and linear polarization were employed to investigate the electrochemical performance of fabricated electrodes. Moreover, evaluate the risk of toxic metals release from the catalytic electrode during treatment process was investigated. The maximum degradation efficiency of 99.8, 100, and 100% for FT, TF, and CT was found under the optimal condition of FT, TF, and CT concentration 15.0 mg L-1, pH 7.0, current density 7.0 mA cm-2, and electrolysis time of 120 min. The Bi-PbO2, PbO2, and SnO2-Sb2O3 electrodes revealed the oxygen evolution potential of 2.089, 1.983, 1.914 V, and the service lifetime of 82, 144, and 323 h, respectively. The results showed that after 5.0 h of electrolysis, none of the heavy metals such as Bi, Pb, Sb, Sn, and Ti were detected in the treated solution.

Electrocatalytic degradation of methyl orange and 4-nitrophenol on a Ti/TiO2-NTA/La-PbO2 electrode: electrode characterization and operating parameters

The anode material plays a crucial role in the process of electrochemical oxidation. Herein, a TiO₂ nanotube arrays (TiO₂-NTA) intermediate layer and La-PbO₂ catalytic layer were synthesized on a Ti surface by the electrochemical anodic oxidation and electrochemical deposition technology, respectively. The prepared Ti/TiO₂-NTA/La-PbO₂ electrode was used as an electrocatalytic oxidation anode for pollutant degradation. Scanning electron microscopy (SEM) analysis showed that the TiO₂-NTA layer possessed a highly ordered and well-aligned nanotube array morphology, and the La-PbO₂ layer with angular cone cluster was uniform and tightly bonded. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis indicated that the intermediate layer primarily consisted of the anatase crystal structure of TiO₂ and the catalyst layer was made of La-PbO₂. Electrochemical analysis revealed that Ti/TiO₂-NTA/La-PbO₂ electrode exhibited higher oxidation peak current, electrochemical active surface area, and oxygen evolution potential (OEP, 1.64 V). Using methyl orange and 4-nitrophenol as model pollutants, electrocatalytic properties of the prepared Ti/TiO₂-NTA/La-PbO₂ electrode were systematically investigated under different conditions, and the electrochemical degradation fitted well with the pseudo-first-order kinetics model. Efficient anodic oxidation of model pollutants was mainly attributed to the indirect oxidation mediated by hydroxyl radicals (•OH). The total organic carbon (TOC) removal efficiency of methyl orange and 4-nitrophenol was 70.2 and 72.8%, and low energy consumption (2.50 and 1.89 kWh g^-1) was achieved after 240 min of electrolysis under the conditions of initial concentration of model pollutant, electrode spacing, and electrolyte concentration were 50 mg L^-1, 2 cm, and 0.1 mol L^-1, respectively. This work provided a new strategy to develop the high-efficiency electrode for refractory pollutants degradation.

Recent Trends in Pharmaceuticals Removal from Water Using Electrochemical Oxidation Processes

Nowadays, the research on the environmental applications of electrochemistry to remove recalcitrant and priority pollutants and, in particular, drugs from the aqueous phase has increased dramatically. This literature review summarizes the applications of electrochemical oxidation in recent years to decompose pharmaceuticals that are often detected in environmental samples such as carbamazapine, sulfamethoxazole, tetracycline, diclofenac, ibuprofen, ceftazidime, ciprofloxacin, etc. Similar to most physicochemical processes, efficiency depends on many operating parameters, while the combination with either biological or other physicochemical methods seems particularly attractive. In addition, various strategies such as using three-dimensional electrodes or the electrosynthesis of hydrogen peroxide have been proposed to overcome the disadvantages of electrochemical oxidation. Finally, some guidelines are proposed for future research into the applications of environmental electrochemistry for the degradation of xenobiotic compounds and micropollutants from environmental matrices. The main goal of the present review paper is to facilitate future researchers to design their experiments concerning the electrochemical oxidation processes for the degradation of micropollutants/emerging contaminants, especially, some specific drugs considering, also, the existing limitations of each process.

Development of a novel graphitic carbon nitride and multiwall carbon nanotube co-doped Ti/PbO2 anode for electrocatalytic degradation of acetaminophen

In this work, we have constructed a novel graphitic carbon nitride/multiwall carbon nanotube (GCN/CNT) doped Ti/PbO₂ as anode for highly effective degradation of acetaminophen (ACE) wastewater. The ACE removal efficiency of 83.2% and chemical oxygen demand removal efficiency of 76.3% are achieved under the optimal condition of temperature 25 °C, initial pH 7, current density 15 mA cm^-2 and Na₂SO₄ concentration 6.0 g L^-1. The excellent electrocatalytic activity of Ti/PbO₂-GCN-CNT anode for ACE oxidation is ascribed to the effective suppression of oxygen evolution and the enhanced electron transfer after introducing GCN and CNT. Furthermore, Ti/PbO₂-GCN-CNT electrode displays excellent stability and reusability. ACE degradation is accomplished by direct oxidation and indirect oxidation, and ∙OH radical plays primary role in the indirect oxidation of ACE wastewater. The intermediates of ACE degradation are detailly investigated using LC-MS analysis and a possible degradation mechanism is proposed.

Recent Trends in Removal Pharmaceuticals and Personal Care Products by Electrochemical Oxidation and Combined Systems

Due to various potential toxicological threats to living organisms even at low concentrations, pharmaceuticals and personal care products in natural water are seen as an emerging environmental issue. The low efficiency of removal of pharmaceuticals and personal care products by conventional wastewater treatment plants calls for more efficient technology. Research on advanced oxidation processes has recently become a hot topic as it has been shown that these technologies can effectively oxidize most organic contaminants to inorganic carbon through mineralization. Among the advanced oxidation processes, the electrochemical advanced oxidation processes and, in general, electrochemical oxidation or anodic oxidation have shown good prospects at the lab-scale for the elimination of contamination caused by the presence of residual pharmaceuticals and personal care products in aqueous systems. This paper reviewed the effectiveness of electrochemical oxidation in removing pharmaceuticals and personal care products from liquid solutions, alone or in combination with other treatment processes, in the last 10 years. Reactor designs and configurations, electrode materials, operational factors (initial concentration, supporting electrolytes, current density, temperature, pH, stirring rate, electrode spacing, and fluid velocity) were also investigated.

Optimized terbium doped Ti/PbO2 dimensional stable anode as a strong tool for electrocatalytic degradation of imidacloprid waste water

The presence of pesticides in water has emerged as a momentous environmental issue over the past decades. Herein, a terbium doped Ti/PbO₂ (denoted as Ti/PbO₂-Tb) dimensionally stable Ti/PbO₂-Tb anode has been successfully prepared by one-step electrodeposition path for electrocatalytic degradation of imidacloprid (IMD) wastewater with high efficiency. Ti/PbO₂-Tb electrode presents higher oxygen evolution potential, lower charge transfer resistance, stronger stability, longer service lifetime and outstanding electrocatalytic activity than Ti/PbO₂ electrode. The optimum condition for IMD oxidation is obtained by analyzing the effects of some critical operating parameters including temperature, initial pH, current density and electrolyte concentration. It is proved that 70.05% of chemical oxygen demand and 76.07% of IMD are removed after 2.5 h of degradation under current density of 8 mA cm^-2, pH 9, temperature 30 °C and 7.0 g L^-1 NaCl electrolyte. In addition, the electrode displays commendable energy saving property as well as favorable reusability. The degradation mechanism of IMD is proposed by analyzing the intermediates identified by LC-MS. The present research provides a feasible strategy to degrade IMD wastewater by Ti/PbO₂-Tb electrode.

An overview of cephalosporin antibiotics as emerging contaminants: a serious environmental concern

Antibiotics have been categorized as emerging pollutants due to their indiscriminate usage, continuous input and persistence in various environmental matrices even at lower concentrations. Cephalosporins are the broad-spectrum antibiotics of β-lactam family. Owing to its enormous production and consumption, it is reported as the second most prescribed antibiotic classes in Europe. The cephalosporin wastewater contains toxic organic compounds, inorganic salts, and active pharmaceutical ingredients (API) which pose a potential threat to the organisms in the environment. Therefore, removal of cephalosporin antibiotics from the environment has become mandatory as it contributes to increase in the level of chemical oxygen demand (COD), causing toxicity of the effluent and production of cephalosporin-resistant microbes. So far, several processes have been reported for degradation/removal of cephalosporins from the environment. A number of individual studies have been published within the last decade covering the various aspects of antibiotics. However, a detailed compilation on cephalosporin antibiotics as an emerging environmental contaminant is still lacking. Hence, the present review intends to highlight the current ecological scenario with respect to distribution, toxicity, degradation, various remediation technologies, and the regulatory aspects concerning cephalosporins. The latest successful technologies for cephalosporin degradation/removal discussed in this review will help researchers for a better understanding of the nature and persistence of cephalosporins in the environment along with the risks associated with their existence. The research thrust discussed in this review will also evoke new technologies to be attempted by the future researchers to develop sustainable options to remediate cephalosporin-contaminated environments.