Sensitive and facile colorimetric sensing strategy for ascorbic acid determination based on CoOOH nanoflakes-ABTs oxidative system

An innovative solid-phase biosensor for rapid on-site detection of N-nitrosodimethylamine incorporating zein film and upconversion nanoparticles

Pickled frequently contains nitrosodimethylamine (NDMA), a mutagenic and carcinogenic substance that is dangerous for the general public's health. This study reports on the fabrication of a fluorescent biosensor using zein film and aptamer functionalized upconversion nanoparticles (UCNPs) for on-site monitoring of NDMA in meat. UCNPs were first prepared followed by aptamer binding and mixing with zein film, which was further conjugated with cDNA of dabcyl modified at 5'. The fluorescence resonance energy transfer (FRET) mechanism between the UCNPs and dabcyl was exploited. The fluorescence signals of the zein film recovered when NDMA was present because it was selectively collected by the particular aptamer and damaged the cDNA structure. The designed functionalized zein film was used for on-site and portable determination of NDMA with a lower limit of detection of 0.017 ng/mL, and possessed a satisfactory recovery ranging from 95.8% to 100.2% with no significant difference compared with the GC-MS method.

Protein-coated cobalt oxide-hydroxide nanospheres deliver photosensitizer IR780 iodide for near-infrared light-triggered photodynamic/photothermal/chemodynamic therapy against colon cancer

Phototherapy has garnered worldwide attention for its minimal invasiveness, controllability, and spatial selectivity in treating cancer. One promising approach involves the use of near-infrared dye IR780, which demonstrates both photodynamic therapy (PDT) and photothermal therapy (PTT) effects under 808 nm laser irradiation. However, this hydrophobic dye's toxicity and limited tumor targeting ability severely hamper its suitability for cancer applications. Herein, a biocompatible nanoplatform CoOOH-IR780@BSA (CoIRB) is developed to efficiently deliver IR780 and provide multi-mode treatments for colon tumors. Due to the nanocarrier coating, CoIRB nanoparticles demonstrated reliable dispersion and stability, and their biotoxicity was substantially reduced for safer blood circulation, which overcame the biological barrier of IR780. The nanoplatform has also shown considerable results in phototherapy in vivo and in vitro experiments, with successful inhibition of MC38 tumor growth through intravenous administration. Additionally, the introduction of cobalt ions could induce Fenton-like reactions to activate the production of toxic hydroxyl radicals (˙OH), exerting an assisted chemodynamic therapy (CDT) effect. Notably, these nanodrugs also exhibited potential as scavengers of reductive glutathione (GSH) and hydrogen sulfide (H2S), leading to amplifying oxidative damage of reactive oxygen species (ROS). Overall, the versatile therapeutic platform, CoIRB, has opened up considerable prospects as a biotherapeutic option for combining PDT/PTT/CDT against colon cancer.

A redox reaction-induced ratiometric fluorescence platform for the specific detection of ascorbic acid based on Ag2S quantum dots and multifunctional CoOOH nanoflakes

In this work, a ratiometric fluorescent nanoplatform for the detection of ascorbic acid (AA) was constructed based on the Ag₂S quantum dots (QDs) and multifunctional hydroxyl cobalt oxide nanoflakes (CoOOH NFs). Ag₂S QDs can be assembled on the surface of CoOOH NFs by electrostatic adsorption, resulting in the quenching of the NIR fluorescence emission of Ag₂S QDs at 680 nm effectively through the inner filter effect (IFE). o-Phenylenediamine (OPD), a common substrate of oxidase-like (OXD) mimic, is rapidly oxidized into the fluorescent product of 2,3-diaminophenazine (DAP) with the appearance of an emission peak at 575 nm under the catalysis of CoOOH NFs. After AA was added, the fluorescence emission of DAP declined because of the decline in the OXD-like activity of CoOOH NFs due to the transformation of Co²⁺. Simultaneously, Ag₂S QDs were released, accompanied by the recovery of red fluorescence. These two fluorescent signals can be excited at the same excitation wavelength, simplifying the detection procedure. Using F₅₇₅/F₆₈₀ as the readout, the quantification of AA can be realized with the linear range and detection limit of 0.2 μM-20 mM and 0.014 μM, respectively. The ratiometric fluorescence sensor can be effectively used to determine the content of AA in real samples such as juice and serum. This work integrates the in-situ formation of the fluorescent species via the catalysis of the nanozyme and the redox reaction to destroy the CoOOH NFs nanozyme as well as the two dimensional nanoflake induced turn-off-on strategy for Ag₂S QDs, which provides a specific strategy for the selective detection of AA and may offer a reliable approach for the construction of other biosensing platforms.

Development of cobalt oxyhydroxide-aptamer-based upconversion sensing nano-system for the rapid detection of Staphylococcus aureus

Staphylococcus aureus (S. aureus) is a common pathogen that is dangerous to humans' health. Herein, a novel upconversion fluorescent biosensor based on fluorescence resonance energy transfer from aptamer-labeled upconversion nanoparticles (UCNPs-apt) as donor and cobalt oxyhydroxide (CoOOH) nanosheets as acceptor was designed to detect S. aureus in complex matrices. The principle of the work relies on fluorescence resonance energy transfer as UCNPs-apt can self-assemble on CoOOH nanosheet surfaces by van der Waals forces to effectively quench the fluorescence. When S. aureus was added, the aptamer was able to preferentially capture the target, resulting in the dissociation of donor and acceptor and the recovery of fluorescence. The structure and morphology of the nanostructures were assigned in detail by a series of characterizations, and the energy transfer mechanism was evaluated by time-resolved lifetime measurements. Under the optimal conditions, a linear calibration plot was obtained in a concentration range of 45-4.5 × 10⁶ CFU/mL with a limit of detection of 15 CFU/mL. In addition, the proposed biosensor was used for S. aureus detection in real samples (e.g., pork, beef), and the detection result showed no significant difference (p > 0.05) compared with the conventional plate count approach. Hence, the fabricated biosensor holds a potential application for S. aureus in food analysis and public health.

Cascaded Nanozyme System with High Reaction Selectivity by Substrate Screening and Channeling in a Microfluidic Device

Surpassing natural enzymes in cost, stability and mass production, nanozymes have attracted wide attention in fields from disease diagnosis to tumor therapy. However, nanozymes intrinsically have low reaction selectivity, which significantly restricts their applications. A general method is reported to address this challenge by following a biomimetic operation principle of substrates channeling and screening. Two oxidase- and peroxidase-like nanozymes (i.e., emerging N-doped carbon nanocages and Prussian blue nanoparticles), were cascaded as a proof of concept to improve the reaction selectivity in transforming the substrate into the targeted product by more than 2000 times. The cascaded nanozymes were also adopted to a spatially confined microfluidic device, leading to more than 100-fold enhancement of the reaction efficiency due to signal amplification.

A template-free assembly of Cu,N-codoped hollow carbon nanospheres as low-cost and highly efficient peroxidase nanozymes

Utilizing Cu2+-coordinated poly(m-phenylenediamine) as the precursor, Cu,N-codoped hollow carbon nanospheres as low-cost and highly efficient peroxidase nanozymes were assembled through a template-free strategy for the first time.

A turn off-on fluorometric and paper based colorimetric dual-mode sensor for isoniazid detection

In the present study, Cobalt oxyhydroxide (CoOOH) nanosheets were applied for establishing a dual fluorometric and smartphone-paper-based colorimetric method to detect isoniazid. CoOOH nanosheets quenched the fluorescence emission of sulfur and nitrogen co-doped carbon dots (S,N-CDs) due to inner filter effect (IFE). The quenched fluorescence intensity of S,N-CDs restored in the presence of isoniazid due to destroying CoOOH nanosheets by this drug. Moreover, with adding isoniazid the solution color of CoOOH nanosheets altered from brownish yellow to pale yellow. We exploited these facts to design a turn off-on fluorometric and paper based colorimetric sensor for isoniazid measurement at the range of 0.5-10 and 5-100 μM with detection limits of 0.28 μM and 4.0 μM, respectively. The introduced dual sensor was used for pharmaceutical, environmental and biological analysis of isoniazid with satisfactory results. The paper based colorimetric sensor can be applied for isoniazid portable monitoring by smartphone as a detector and even nocked eyes.

Novel approaches for colorimetric measurements in analytical chemistry - A review

Colorimetric techniques have been developed and used in routine analyses for over a century and apparently all their potentialities have been exhaustively explored. However, colorimetric techniques have gained high visibility in the last two decades mainly because of the development of the miniaturization concept, for example, paper-based analytical devices that mostly employ colorimetric reactions, and by the advances and popularity of image capture instruments. The impressive increase in the use of these devices was followed by the development and enhancement of different modes of color detection to meet the demands of making qualitative, semi-quantitative, and fully quantitative analyses of multiple analytes. Cameras, scanners, and smartphones are now being used for this purpose and have become suitable alternatives for different approaches to colorimetric analysis; this, in addition to advancements in miniaturized devices. On the other hand, recent developments in optoelectronics technologies have launched more powerful, more stable and cheaper light-emitting diodes (LEDs), which once again have become an interesting tool for the design of portable and miniaturized devices based on colored reactions. Here, we present a critical review of recent developments and challenges of colorimetric detection in modern analytical chemistry in the last five years, and present thoughts and insights towards future perspectives in the area to improve the use of colorimetric detection in different application approaches.

Smartphone assisted colorimetric and fluorescent triple-channel signal sensor for ascorbic acid assay based on oxidase-like CoOOH nanoflakes

Ascorbic acid (AA) is an important diet-derived antioxidant to human body. Thus, efficient and accurate detection of AA is of considerable significance in food analysis. Herein, smartphone assisted colorimetric and fluorescent triple-channel signal sensor has been developed for AA monitoring based on oxidase-like CoOOH nanoflakes. CoOOH nanoflakes can efficiently catalyze the oxidation of p-phenylenediamine (p-PD) into reddish brown p-PDox. The carbon dots (C-dots) are further introduced, of which the fluorescence can be quenched by p-PDox. However, in the presence of AA, the CoOOH nanoflakes is reduced and thus collapsed. As a result, the oxidation of p-PD is restrained, and thus the fluorescence of C-dots keeps strong. Based on AA induced light color, low absorbance, and strong fluorescence, triple-channel signal sensor has been proposed for AA determination. The AA assay shows a dynamic response range from 0.5 to 10 μM with a detection limit of 0.09 μM. The method assay allows detection of AA in real samples such as fruit juices. Combination with portable smartphone, the developed sensor is potential for AA determination in resource-poor settings.