Adsorption of tylosin and sulfamethazine by carbon nanotubes and titanium dioxide nanoparticles: pH-dependent mechanisms

A review on carbon-based biowaste and organic polymer materials for sustainable treatment of sulfonamides from pharmaceutical wastewater

Frequent detection of sulfonamides (SAs) pharmaceuticals in wastewater has necessitated the discovery of suitable technology for their sustainable remediation. Adsorption has been widely investigated due to its effectiveness, simplicity, and availability of various adsorbent materials from natural and artificial sources. This review highlighted the potentials of carbon-based adsorbents derived from agricultural wastes such as lignocellulose, biochar, activated carbon, carbon nanotubes graphene materials as well as organic polymers such as chitosan, molecularly imprinted polymers, metal, and covalent frameworks for SAs removal from wastewater. The promising features of these materials including higher porosity, rich carbon-content, robustness, good stability as well as ease of modification have been emphasized. Thus, the materials have demonstrated excellent performance towards the SAs removal, attributed to their porous nature that provided sufficient active sites for the adsorption of SAs molecules. The modification of physico-chemical features of the materials have been discussed as efficient means for enhancing their adsorption and reusable performance. The article also proposed various interactive mechanisms for the SAs adsorption. Lastly, the prospects and challenges have been highlighted to expand the knowledge gap on the application of the materials for the sustainable removal of the SAs.

Preparation of carbonyl, hydroxyl, and amino-functionalized microporous carbonaceous nanospheres from syrup-based waste to remove sulfamethazine

Sulfadiazine (SDZ) was a persistent sulfonamide antibiotic with a potential risk to human health. The waste dipping syrup was considered useless and environmentally unfriendly solution. In this work, carbonyl-, hydroxyl-, and amino-functionalized microporous carbonaceous nanospheres were synthesized using waste dipping syrup with glucose, fructose, and nitrogen, which was used as precursor for hydrothermal and pyrolysis process. The products were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transformed infrared spectroscopy (FTIR), the point of zero charge (PZC), Xray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET). The carbonaceous nanospheres with large BET surface area (924.528 m²/g), micropores (2.127 nm), and high micro-porosity (89.54 %) allowed the rapid diffusion of SDZ (0.512nm×0.738 nm) into micropores of nanospheres. The majority SDZ (initial concentration = 20 mg/L) was removed (>96.8%) in the presence of 1.0 g/L nanoparticles after 40-min reaction at pH = 6.0. The adsorption capacity of SDZ onto nanospheres was 96.6 mg/g. The adsorption kinetic and equilibrium followed pseudo-first-order model and Langmuir isotherm, respectively. The intra-particle diffusion model indicated a three-step adsorption process. In addition, the regenerated nanospheres could be reused over four recycles. The optimal fabrication was realized at lower hydrothermal and pyrolysis temperature of 180 °C and 400 °C, respectively, which involved no additional chemical activating agent and had a high yield (70.8 %). Collectively, hydroxylation, carboxylation, amination, large specific surface area, and multi-microporosity may be responsible for improved adsorption performance of SDZ onto nanospheres. The findings provided a novel pathway for SDZ-loading wastewater treatment using waste syrup.

Comparing the effects of different types of inorganic nanoparticles on 17β-estradiol adsorption by graphene oxide

This study compared the effects of five types of inorganic nanoparticles (INPs) on the 17β-estradiol (E2) adsorption to graphene oxide (GO). The results showed that INPs increased the equilibrium time for the adsorption of E2 to GO. Higher Brunauer-Emmett-Teller (BET) surface area of INPs resulted in lower diffusion rate of E2, and thus the adsorption rate constant (k₂) calculated from pseudo-second-order kinetic model negatively correlated with the BET surface area of INPs (p = 0.037). In addition, INPs decreased the adsorption amount of E2 to GO, and the inhibition effects declined in the order of Al₂O₃ > ZnO > TiO₂ > SiO₂ > Fe₂O₃. This is determined by the interactions between GO and INPs. The positively charged ZnO and Al₂O₃ strongly heteroaggregate with GO via electrostatic attraction, and then significantly inhibited E2 adsorption to GO. In contrast, the homoaggregation of GO was superior to its heteroaggregation with negatively charged SiO₂ and TiO₂, and then lower inhibition of E2 adsorption to GO was induced. Fe₂O₃ with less negative charge (-8.48 mV) led to the lowest inhibition effect on E2 adsorption to GO because of its preferable homoaggregation. The results were further confirmed by Derjaguin-Landau-Verwey-Overbeek calculation, transmission electron microscopy, and sedimentation experiments. This study revealed how the properties of INPs influence their effects on the adsorption of E2 by GO, and the findings are critical to understand the behavior and fate of GO and pollutants in natural aquatic environment.