Preparation of reduced graphene oxide/titanium dioxide composite materials and its application in the treatment of oily wastewater

Advanced magnetic nanospheres for oil pollutant management: Dual roles in emulsification and demulsification

Environmental contamination from oil spills and industrial oily wastewater poses significant ecological risks due to the persistence of harmful organic compounds. To address these challenges, magnetic composite nanospheres (CMNP@CHPEI) are systematically developed, with carboxylated Fe3O4 nanoparticles (CMNP) as the core and amphiphilic hyperbranched polyethyleneimine (CHPEI) as the decorated shell. These novel nanospheres combine the controllable size and magnetic responsiveness of "hard" magnetic nanomaterials with the structural complexity and functional diversity of "soft" hyperbranched polymers. This design allows for switching between emulsification and demulsification behaviors by regulating the size of the nanospheres and the amphiphilicity of CHPEI. Specifically, the nanospheres can form Pickering emulsions with oil droplet sizes smaller than 1 µm, maintaining stability for up to 75 days, and achieve rapid oil-water separation with demulsification efficiencies up to 99.8 %. Even after seven recycling experiments, they still retain significant interfacial activity and applicability. Interfacial characteristic experiments and molecular dynamics simulations reveal that particle size directly affects the film structures formed at oil-water interface, while the amphiphilic functional molecules determine the interaction mode of nanospheres with oil-water phases. These achievements introduce a versatile, environmentally friendly material for removing hazardous oil-based pollutants, with promising applications in oil spill remediation and industrial wastewater treatment.

Biomass-Derived Cellulose Acetate Membranes Modified with TiO2/Graphene Oxide for Oil-In-Water Emulsion Treatment

Considering the environmental impact and health risks caused by oily wastewater in the petrochemical industry, it is crucial to develop more efficient separation techniques than traditional methods, such as membrane separation, for treating stable emulsions enriched with natural surfactants. This study investigated the preparation of dense cellulose acetate membranes from a low-cost biomass precursor (Luffa cylindrica) and their modification with graphene oxide (GO) and TiO2 nanoparticles, aiming to obtain a polymeric nanocomposite with good flux characteristics and selectivity for the treatment of oil/water emulsions. The materials obtained were characterized using techniques such as X-ray diffraction, nuclear magnetic resonance spectroscopy, infrared absorption spectroscopy, along with optical and scanning electron microscopy, among others. The membranes were prepared by the casting technique and modified with the above-mentioned nanostructured materials. Flux analyses with petroleum emulsion revealed that membranes modified with GO and TiO2 nanoparticles showed significant improvements in antifouling resistance compared to unmodified membranes. These enhanced properties highlight the potential of modified cellulose acetate membranes for application in industrial wastewater treatment.

The effect of silica-doped graphene oxide (GO-SiO2) on persulfate activation for the removal of Acid Blue 25

The release of synthetic dyes into water bodies poses many environmental issues, and their removal is a necessity. Advanced oxidation processes (AOPs) can be employed for removal, in many of which a catalyst is used. graphene oxide (GO) is a viable catalyst due to its distinctive structural properties; however, it is reportedly incapable of effectively activating persulfate. Thus, this study delves for the first time into the influence of doping silica on enhancing GO's catalytic performance to activate persulfate for decolorizing Acid Blue 25 (AB25). Based on the results, an equal weight proportion of GO to silica was selected as the most efficient ratio. In addition, pH had no significant effect on removal efficiency, while temperature had the highest impact. Within 150 min with 0.075 gr/L of GO-SiO2 as the catalyst and 1 gr/L of Na2S2O8 as the oxidant, the investigated process removed Acid Blue 25 up to 82%, which was 9% higher than when GO alone was used as the catalyst. As for COD removal, the contribution of doping silica was more significant and led to 37% COD removal, which was 17% higher than when GO alone was used.

Amine-functionalized cotton for the treatment of oily wastewater

Common commercial demulsifiers are typically made from ethylene oxide and propylene oxide. The production process is dangerous and complex, with poor adaptability and high cost. In this work, cotton modified with polyethylene polyamine was utilized as a demulsifier for the treatment of oily wastewater. The chemical structure and morphology of the as-prepared sample (CPN) were characterized by IR spectrum and SEM. The effect of CPN dosage, pH value, and salinity on the demulsification performance of oily wastewater was explored through the bottle tests. The results showed that the light transmittance of separated water was 81.7% and the corresponding deoiling rate was 98.5% when a CPN dosage of 25 mg/L was used at room temperature for 30 min. The interfacial properties were also systematically investigated, and the results indicated that CPN had better interfacial activity and a stronger reduction capability of interfacial tension compared to asphaltenes. The finding initiated and accelerated the demulsification process of oily wastewater. Based on the outstanding performance of this biomass-derived demulsifier, it shows promising potential for application in the treatment of oily wastewater.

Evaluation of reduced graphene oxide-based nanomaterial as dispersive solid phase extraction sorbent for isolation and purification of aflatoxins from poultry feed, combined with UHPLC-MS/MS analysis

Poultry feed comprises cereals and their by-products and is vulnerable to aflatoxins contamination. This study utilised reduced graphene oxide-titanium dioxide (rGO-TiO2) nanomaterial as a dispersive solid phase extraction (d-SPE) adsorbent to extract, enrich and purify aflatoxins (aflatoxin B1, aflatoxin B2, aflatoxin G1 and aflatoxin G2). The synthesis of rGO-TiO2 nanomaterials through hydrothermal process and characterisation by transmission electron microscopy, scanning electron microscopy, Brunauer-Emmett-Teller (BET) and X-ray diffraction reveals that the nanomaterials have a single-layer structure embedded with TiO2 nanoparticles. The matrix-spiked technique was employed for the extraction process, optimisation of d-SPE, and analytical method validation. The most appropriate extraction solvent was acetonitrile/water/formic acid (79/20/1, v/v/v), with 30 min of extraction time assisted by ultra-sonication. The optimised d-SPE parameters were: 50 mg of rGO-TiO2 as sorbent amount, 2% methanol as the sample loading solvent, 30 min as adsorption time, and absolute ethanol as the washing reagent. The d-SPE method exhibited good desorption efficiency with 3 mL of acetonitrile/formic acid (99/1, v/v) and 20 min desorption time. After validation, the UHPLC-MS/MS analytical method has an acceptable range of specificity, linearity (R2 ≥ 0.999), sensitivity (LOQ 0.04-0.1 µg kg-1), recoveries (74-105% at three matrix-spiked levels) and precision (RSD 1.5-9.6%). Poultry feed samples (n = 12) were pretreated by this method to extract, enrich and analyse aflatoxins, which were detected in all poultry feed samples. The contamination levels were within the permissible limits.

Demulsification of amphiphilic gemini ionic liquids and its demulsification mechanism

This work aims to prepare two new amphiphilic and interfacial active gemini ionic liquids to treat crude oil and investigates its demulsification mechanism. Tetraethylene glycol was pretreated with thionyl chloride and used as a linker to connect succinimide or phthalimide, and then reacted with dodecyl benzene sulphonic acid to obtain the corresponding amphiphilic and interfacial active gemini ionic liquid STA or PTA, respectively. ¹H nuclear magnetic resonance spectroscopy (¹HNMR) and Fourier-transform infrared spectroscopy (FTIR) was used to determine the chemical structures. The demulsification tests showed the demulsification efficiency with 150 mg/L of STA or PTA at 60 °C for 30 min was 99.89% and 99.79%, respectively. Furthermore, the demulsification mechanism of STA and PTA were studied and the prominent demulsification ability of STA and PTA were attributed to the better interfacial activity and amphipathy which could destroy the asphaltenes interfacial film. These results showed that STA and PTA had excellent demulsification efficiency, which promised application in petroleum industry.

Preparation of a demulsifier for oily wastewater using thorn fir bark as raw materials via a hydrothermal and solvent-free amination route

In current work, a TB-EDA demulsifier for disposing oily wastewater was prepared using thorn fir bark (TB) as starting materials via a hydrothermal and solvent-free amination route. Field emission scanning electron microscope (FE-SEM), energy dispersive X-ray spectrometer (EDS), and Fourier transform infrared spectroscope (FT-IR) were employed to characterize the TB-EDA demulsifier. Three-phase contact angle (CA), interfacial activity, formation of interfacial film (FIF), coalescence time of droplets (CTD), dynamic interfacial tension (IFT), and Zeta potential were carried out to study the possible demulsification mechanism. Bottle test was performed to investigate the effect of the TB-EDA dosage, salinity, and pH value on the demulsification performance at room temperature. Light transmittance (D_L) and oil removal rate (D_R) of separated water were 94.7% and 97.2%, respectively, with 100 mg/L of TB-EDA demulsifier in oily wastewater at room temperature. In addition, the TB-EDA demulsifier has an excellent salt tolerance even at the salinity of 50,000 mg/L. The corresponding D_L and D_R could reach 99.8% and 99.9%, respectively.

Metal-oxide coated Graphene oxide nano-composite for the treatment of pharmaceutical compound in photocatalytic reactor: Batch, Kinetics and Mathematical Modeling using Response Surface Methodology and Artificial Neural Network

Titanium dioxide (TiO₂) photocatalyst has gained constant interest in the treatment of wastewater because of its greater stability, lower cost, low-toxicity, high efficiency, and more reactivity under UV radiation. On the other hand, Graphene oxide (GO) possesses high electron mobility, and therefore when GO is combined with TiO_2, the photocatalytic activity of TiO₂ is increased. In this study, nano-composite was synthesized in a hydrothermal reactor using two types of TiO₂ nanoparticles (TiO₂ consisting of a mixture of rutile and anatase phase (Type 1) and bioreduced TiO₂ (Type 2)) and the efficiency of both the TiO₂-GO nanocomposite to remove the drug Carbamazepine (CBZ) was investigated. The TiO₂-GO nanocomposite with the Type 1 TiO₂ exhibited greater efficiency hence further studies were conducted with that composite. The efficiency of TiO₂-GO nanocomposite for the purpose of removing CBZ were investigated in presence of different types of incident radiation like Solar radiation, white light and three type of Ultraviolet radiation (A, B, C). The removal of the drug by TiO₂-GO composite has been optimized using response surface methodology and artificial neural network. From this study, the maximum reduction was observed was 91.2% and whereas in case of the RSM optimization study the maximum removal that was observed was 91.7%. The validation of the RSM model was done using the mathematical analysis of the model equation of RSM. Different kinetics models was also analyzed using the experimental data and it was observed that it followed pseudo-second-order kinetics. The optimization using ANN also showed a close interaction with the experimental results.

Demulsification of oily wastewater using a nano carbon black modified with polyethyleneimine

In this work, nano carbon black was modified with polyethyleneimine (CB-PEI) under an ultrasonic field. The obtained product was used as a demulsifier to break oily wastewater. Morphology, structure, and chemical composition of CB-PEI were systematically analyzed. Bottle test was carried out to evaluate the influence of dosage, pH value and salinity on the demulsification efficiency of the emulsion. The results showed that the light transmittance of water phase (TSW) after the demulsification was 79.1% and corresponding oil removal rate (ORR) could reach up to 99.4% with 60 mg/L of CB-PEI at ambient temperature for 30 min. In addition, the possible demulsification mechanism was explored by dynamic interface tension (IFT), elasticity modulus, wettability, self-assemble of interfacial membrane, zeta potential and micrograph analysis. It indicated that CB-PEI had an appropriate amphiphilicity and good interfacial activity, which could improve it quickly transfer to the oil-water interface and result in the oil-water separation. The current work provides a simple method to prepare a demulsifier with excellent performance, so it has a good application prospect for the treatment of oil-water emulsions.

A critical review of the development and demulsification processes applied for oil recovery from oil in water emulsions

The formation of stable emulsions is a fundamental problem in oil industry that can result in a sequence of environmental and operational problems. Chemical demulsification is extensively applied for the recovery of oil from water as well as water from oil. This review introduces different chemical demulsifiers applied for the demulsification and recovery of oil from oil in water (O/W) emulsions. Main types of surfactants (anionic, cationic, nonionics and amphoteric) involved in the formation of emulsions and enhances their stability were discussed. Promising demulsifiers such as nanoparticle (NP), hyperbranched polymers, and ionic liquids (IL), which achieved high oil recovery rate, parameters influencing demulsification efficiency and demulsification mechanisms were explored. Lastly, improvements, challenges, and new changes being made to chemical demulsifiers were underlined. Functionalized magnetic nanoparticles and hyperbranched polymers were very effective in recovering oil from O/W emulsions with an efficiency >95%. Polymers with highly hydrophilic content and high molecular weight can achieve excellent oil recovery rates due to higher interfacial activity, higher dispersion, and presence of specific functional groups. Although ionic liquids could achieve oil recovery up to 90%, high cost limits their applications. NPs showed excellent oil recovery behavior at low concentrations and ambient temperature. Demulsification efficiency of NPs can be enhanced by functionalize with other components (e.g., polymers and surfactants), while service life can be extend by silica coating. Future challenges include scaling up the use of NPs in oil recovery process and highlighting contrasts between lab-scale and field-scale applications.

Recyclable amine-functionalized carbon nanotubes for the separation of oily wastewater

In this work, a CNTs-NH₂ demulsifier was prepared by grafting ethylenediamine on the surface of carbon nanotubes to break oily wastewater. The physicochemical and interfacial properties of CNTs-NH₂ were characterized and analyzed. It showed that CNTs-NH₂ had an eminent amphipathicity and high interfacial activity, which allows it to sharply migrates to the interface and effectively interacts with interfacial film by the combined action of π-π interaction and electrostatic attraction. The demulsification tests exhibited that CNTs-NH₂ could effectively remove emulsified oil from the oily wastewater. It could be used at acidic and neutral conditions, and high salinity. Moreover, it could be recycled and still maintained its interfacial activity, thusly vastly enhancing the application scope. The light transmittance was up to 88.1% and the corresponding oil removal rate was 99.2% with 100 mg/L of CNTs-NH₂ for 30 min. The oil removal rate of CNTs-NH₂ remained above 97.8% after 6 cycles. This work provides a deep understanding on the design of demulsifier and its demulsification mechanism.

Demulsification of water-in-crude oil emulsion driven by a carbonaceous demulsifier from natural rice husks

Removing emulsified water from a water-in-crude oil (W/O) emulsion is critically required prior to downstream processing in the petroleum industry. In this work, environmentally friendly and amphipathic rice husk carbon (RHC) demulsifier was prepared by a simple carbonization process in a muffle furnace using rice husks as starting materials. RHC was characterized by field-emission scanning electron microscope, energy dispersive spectrometer, Fourier transform infrared spectrometer, ultraviolet-visible spectrometer, powder X-ray diffraction, zeta potential and synchronal thermal analyzer. The factors such as dosage, temperature, settling time, pH value and salinity were systematically investigated. The results indicated that the dehydration efficiency (DE) reached as high as 96.99% with 600 mg/L of RHC for 80 min at 70 °C. RHC exhibited an optimal DE under neutral condition, but it was also effective under acidic and alkaline conditions. Also, it had an excellent salt tolerance. The possible demulsification mechanism was explored by interfacial properties, different treatment methods for RHC and microexamination. The demulsification of RHC is attributed to its high interfacial activity, oxygen-containing groups and content of silica. It indicates that RHC is an effective demulsifier for the treatment of the W/O emulsion.

Nanoscale silica-coated graphene oxide and its demulsifying performance in water-in-oil and oil-in-water emulsions

In current work, GO@SiO₂ nanocomposite was prepared by coating nanoscale silica onto graphene oxide (GO). GO@SiO₂ was characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (IF-IR). Additionally, the demulsifying performance of GO@SiO₂ was investigated by bottle test. The results showed that GO@SiO₂ had a good demulsifying performance in both oil-in-water (O/W) and water-in-oil (W/O) emulsions. When the concentration of GO@SiO₂ was 200 ppm in the O/W emulsion, the optimal light transmittance of aqueous phase (LTA) and corresponding oil removal rate (ORR) at room temperature could reach 86.9% and 99.48%, respectively. Also, GO@SiO₂ had an excellent salt tolerance under acidic condition. Furthermore, GO@SiO₂ also could demulsify the W/O emulsion, and the efficiency at 70 °C could reach 80.5% when the concentration was 400 ppm.

Effective remediation of petrochemical originated pollutants using engineered materials with multifunctional entities

The highly robust, effective, and sustainable remediation of hydrocarbon-contaminated wastewater matrices, which is mainly generated from petroleum and related petrochemical industries, is of supreme interest. Owing to the notable presence of suspended solids, oil, and grease, organic matter, highly toxic elements, high salts, and recalcitrant chemicals, crude oil emulsions, and hydrocarbon-contaminated wastewater are considered a potential threat to the environments, animals, plants, and humans. To effectively tackle this challenging issue, magnetic hybrid materials assembled at nano- and micro-scale with unique structural, chemical, and functional entities are considered robust candidates for demulsification purposes. The current research era on magnetic materials has superwettability, leading to an effective system of superwettability, which is vibrant and promising. The wettability of magnetic and magnetic hybrid materials explaining the theme of superhydrophobicity and superhydrophilicity under the liquid. Herein, we reviewed the applications of magnetic nanoparticles (MNPs) as effective demulsifiers. The demulsifier wettability, dose, pH, salinity, and surface morphology of compelling, magnetic nanoparticles are the main hidden factors in effective demulsifiers. There is a comprehensive discussion on the reuse and recyclability of MNPs after oil, water separation. Furthermore, the main challenges, coupled with the magnetic nanoparticles in the effective separation of emulsions, are intensified in detail. This review will compare the current literature and the utilization of MNPs for the demulsification of oil and water emulsions. This is envisioned that the MNPs would be critical in the petroleum and petrochemical industry to effectively eliminate water from a crude oil emulsion.

Corn Flour Nano-Graphene Prepared by the Hummers Redox Method

In view of the current high cost of graphene, the corn flour with rich sources was selected as the raw material to prepare nano-graphene by the hydrazine hydrate (Hummers) redox method. The elements, structure, and morphology of the obtained corn graphene (CG) were studied by the organic element analysis, X-ray photoelectron spectroscopy, X-ray diffraction, Raman spectroscopy, atomic force microscopy, and transmission electron microscopy. It was found that the carbon content of CG was increased by 37.8% from 57.4% (corn flour) to 95.2% (CG). There was a diffraction peak of graphene on the (002) crystal surface at 23.08°. The D and G peaks of the Raman test were present, and the I D/I G of the peak intensity ratio was 1.19. The lattice distance of the CG sample was larger than that of the commercial graphene (GE), the CG was about three layers with a layer spacing of 1.21 nm, and the CG was thinner than the GE, which proved that the obtained CG was the nano-graphene.