Coalescence of oil droplets in microchannels under brine flow

Unstable Coalescence Mechanism and Influencing Factors of Heterogeneous Oil Droplets

The use of a surfactant solution during oil and gas field development might improve the recovery rate of oil reservoirs. However, the serious emulsification of the produced liquid will bring challenges to the subsequent treatment process and storage and transportation. It is urgent to understand the coalescence mechanism of crude oil under the action of surfactant solution. This research investigates the coalescence mechanism of numerous oil droplets under liquid flow perturbation. The model was established to study the coalescence process of multiple oil droplets. The effects of the number of oil droplets under homogeneous conditions, the size of oil droplets, and the distance between oil droplets under non-homogeneous conditions on the coalescence process were analyzed. Meanwhile, the change rules of the completion time of oil droplet coalescence were drawn. The results show that the smaller the size of individual oil droplets under non-homogeneous conditions, the longer the coalescence completion time is, and when the size of individual oil droplets reaches the nanometer scale, the time for coalescence of oil droplets is dramatically prolonged. Compared to static circumstances, the time it takes for oil droplets to coalesce is somewhat shorter under gravity. In the fluid flow process, in the laminar flow zone, the coalescence time of oil droplets decreases with the increase of the liquid flow rate. However, in the turbulent flow zone, the coalescence time of oil droplets increases with the increase in the liquid flow rate. The coalescence time is in the range of 600~1000 ms in the flow rate of 0.05~0.2 m/s. In the presence of surfactants, the oil content in the emulsion system increases under the influence of pumping flow. The change in oil content rate with various surfactants is less impacted by flow rate, owing to the stable emulsion structure created by the extracted fluid within the reservoir. The study findings presented in this research provide technical assistance for effective crude oil storage and transportation.

Splitting of droplet with different sizes inside a symmetric T-junction microchannel using an electric field

In the current study, droplets dynamics under an asymmetric electric field in a T-junction are numerically studied using COMSOL Multi-physics software. The effect of different factors such as dimensionless length of mother droplet (L^*), Capillary number (Ca), and electric capillary number (Ca_e) are investigated on the breakup process in symmetric T-junctions. Two novel patterns of droplets, namely, hybrid asymmetric splitting mode and sorting patterns, have been observed by imposing an electric field in one branch of the microchannel. It is also concluded that using an electric field is a promising strategy to reach droplets with arbitrary sizes and control over the splitting ratio of daughter droplets precisely in a T- junction by adjusting the electric field strength. After a certain electric capillary number (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left. {Ca_{e} } \right|_{Sorting}$$\end{document}CaeSorting), the mother droplet does not breakup and is sorted on the side of the branch that the electric field imposes. Furthermore, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\left. {Ca_{e} } \right|_{Sorting}$$\end{document}CaeSorting increases with the increment of L^* and Ca.

Crude Oil–Brine–Rock Interactions in Tight Chalk Reservoirs: An Experimental Study

We present a systematic study of crude oil–brine–rock interactions in tight chalk cores at reservoir conditions. Flooding experiments are performed on outcrops (Stevns Klint) as well as on reservoir core plugs from Dan field, the Ekofisk and Tor formations. These studies are carried out in core plugs with reduced pore volumes, i.e., short core samples and aged with a dynamic ageing method. The method was evaluated by three different oil compositions. A series of synthetic multicomponent brines and designed fluid injection scenarios are investigated; injection flow rates are optimized to ensure that a capillary-dominant regime is maintained. Changes in brine compositions and fluid distribution in the core plugs are characterized using ion chromatography and X-ray computed tomography, respectively. First, we show that polar components in the oil phase play a major role in wettability alteration during ageing; this controls the oil production behavior. We also show that, compared to seawater, both formation water and ten-times-diluted seawater are better candidates for enhanced oil recovery in the Dan field. Finally, we show that the modified flow zone indicator, a measure of rock quality, is likely the main variable responsible for the higher oil recoveries observed in Tor core samples.