Study on adsorption mechanism of silicate adsorbents with different morphologies and pore structures towards formaldehyde in water

Two-dimensional hydrophilic imprinted resin-graphene oxide composite for selective extraction and rapid determination of gibberellin traces in licorice samples

This study presents novel methodologies and materials for selectively and sensitively determining gibberellin traces in licorice to address food safety concerns. A novel hydrophilic imprinted resin-graphene oxide composite (HMIR-GO) was developed with fast mass transfer, high adsorption capacity, and exceptional aqueous recognition performance for gibberellin. Leveraging the advantages of molecular imprinting, hydrophilic resin synthesis, and rapid mass transfer characteristics of GO, HMIR-GO was employed as an adsorbent, showing resistance to matrix interference. Coupled with HPLC, a rapid and selective method for determining gibberellin was established. Under optimal conditions, the method exhibited a wide linear range (0.02-5.00 μg g-1, r = 0.9999), low detection limits (3.3 ng g-1), and satisfactory recoveries (92.0-98.4%), enabling the accurate and rapid detection of gibberellin in licorice. This study introduces a pioneering strategy for the selective extraction and determination of trace gibberellin levels, offering insights for similar applications in functional foods.

Plant-based calcium silicate from rice husk ash: A green adsorbent for free fatty acid recovery from waste frying oil

Driven by the urgent need for a solution to tackle the surge of rice husk (RH) and waste frying oil (WFO) waste accumulation at a global scale, this report highlights the use of calcium silicates (CS) extracted from acid-pre-treated rice husk ash (RHA) for free fatty acid (FFA) removal from WFO as conventional RHA shows limited FFA adsorption performance. A novel alkaline earth silicate extraction method from acid-pre-treated RHA was outlined. The structural and behavioural attributes of the synthesised CS were identified through BET, SEM-EDS, and XRD analyses and compared to those of RHA. Notable morphology and structural modification were determined, including reducing specific surface areas, mitigating from amorphous to crystalline structure with regular geometric forms, and detecting Si-O-Ca functional groups exclusive to CS adsorbents. A comparison study showed superior lauric acid (LA) adsorption performance by CS absorbents over acid-pre-treated RHA, with a significant increase from 0.0831 ± 0.0004 mmol LA/g to 2.5808 ± 0.0011 mmol LA/g after 60 min. Recognised as the best-performing CS adsorbent, CS-1.0 was used for further investigations on the effect of dosage, LA concentration, and temperature for efficient LA adsorption, with up to 100% LA removal and 5.6712 ± 0.0016 mmol LA/g adsorption capacity. The adsorption isotherm and kinetic studies showed LA adsorption onto CS-1.0 followed Freundlich isotherm with KF = 0.0598 mmol(1-1/n) L(1/n) g-1 & Qe,cal = 3.1696 mmol g-1 and intraparticle diffusion model with kid = 0.1250 mmol g-1 min0.5 & Ci = 0.9625 mmol g-1, indicating rapid initial adsorption and involvement of carboxylate end of LA and the calcium ions on the CS-1.0 in the rate-limiting step. The high equilibrium adsorption capacity and LA adsorption rate indicated that the proposed CS-1.0 adsorbent has excellent potential to recover FFA from WFO effectively.

Amine-Impregnated Dendritic Mesoporous Silica for the Adsorption of Formaldehyde

To adsorb and remove formaldehyde, which is a harmful volatile organic chemical (VOC) detected indoors, an alkylamine was introduced into the substrate as a formaldehyde adsorbent. In this study, Tetraethylenepentaamine (TEPA) was introduced into the mesoporous silica using the amine impregnation method. Since the impregnated alkylamine can block the pores of the silica substrate, the pore size and pore volume are very important factors for its use as a substrate for an adsorbent. Focusing on the substrate's pore properties, Santa Barbara Amorphous-15 (SBA-15) was chosen as a conventional one-dimensional pore-structured mesoporous silica, and dendritic mesoporous silica (DMS) as a three-dimensional pore-structured mesoporous silica. To 1 g each of silica substrate DMS and SBA-15, 0, 0.5, 1.5, and 2.5 g of TEPA were introduced. A fixed concentration and amount of formaldehyde gas was flowed through the adsorbent and then the adsorbent was changed to the 2,4-Dinitrophenylhydrazine (2,4-DNPH) cartridge to adsorb the remaining formaldehyde. According to the methods recommended by the World Health Organization (WHO) and National Institute for Occupational Safety & Health (NIOSH), the formaldehyde captured by 2,4-DNPH was analyzed using high-performance liquid chromatography (HPLC). A comparison of DMS and SBA-15 in the amine impregnation method shows that not only surface area, but also large pore size and high pore volume, contribute to the formaldehyde adsorption ability.

One-step synthesis of chiral molecularly imprinted polymer TiO2 nanoparticles for enantioseparation of phenylalanine in coated capillary electrochromatography

A novel chiral molecularly imprinted polymer TiO₂ nanoparticle was synthesized in one step for the enantioseparation of phenylalanine in coated capillary electrochromatography. To the author's knowledge, the chiral molecularly imprinted nanomaterials have still not been reported, to date. Chiral molecularly imprinted TiO₂ nanomaterials (L-PHE@MIP(APTES-TEOS)@TiO₂) were used as a chiral stationary phase to separate the phenylalanine enantiomers in coated capillary electrochromatography (CEC). The imprinted coating was prepared from L-phenylalanine (L-PHE) as the template, TiO₂ nanoparticles (NPs) as the support substrate, 3-aminopropyltriethoxysilane (APTES) as the functional monomer, and tetraethyl silicate (TEOS) as the cross-linker. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used for the characterization of the L-PHE@MIP(APTES-TEOS)@TiO₂@capillary. Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA) were employed for the characterization of the L-PHE@MIP(APTES-TEOS)@TiO₂. The effects of the applied voltage, pH value, buffer concentration, and acetonitrile content were investigated  experimentally to determine the optimum conditions for CEC. The best resolution for  phenylalanine enantiomers by CEC reached a value of 3.48. In addition, the specific recognition effect of L-PHE@MIP(APTES-TEOS)@TiO₂ on PHE enantiomers was studied by selective experiment. Finally, adsorption kinetic research, adsorption equilibrium isotherm study, and adsorption thermodynamic experiment were carried out to investigate the separation mechanism of PHE enantiomers with the L-PHE@MIP (APTES-TEOS)@TiO₂@capillary, and the results were consistent with those of CEC experiments.

Surface modification of quartz sand: A review of its progress and its effect on heavy metal adsorption

Quartz sand (SiO₂) is a prevalent filtration medium, boasting wide accessibility, superior stability, and cost-effectiveness. However, its utility is often curtailed by its sleek surface, limited active sites, and swift saturation of adsorption sites. This review outlines the prevalent strategies and agents for quartz sand surface modification and provides a comprehensive analysis of the various modification reagents and their operative mechanisms. It delves into the mechanism and utility of surface-modified quartz sand for adsorbing heavy metal ions (HMIs). It is found that the reported modifiers usually form connections with the surface of quartz sand through electrostatic forces, van der Waals forces, pore filling, chemical bonding, and/or molecular entanglement. The literature suggests that these modifications effectively address issues inherent to natural quartz sand, such as its low superficial coarseness, rapid adsorption site saturation, and limited adsorption capacity. Regrettably, comprehensive investigations into the particle size, regenerative capabilities, and application costs of surface-modified quartz sand and the critical factors for its wider adoption are lacking in most reports. The adsorption mechanisms indicate that surface-modified quartz sand primarily removes HMIs from aqueous solutions through surface complexation, ion exchange, and electrostatic and gravitational forces. However, these findings were derived under controlled laboratory conditions, and practical applications for treating real wastewater necessitate overcoming further laboratory-scale obstacles. Finally, this review outlines the limitations of partially surface modified quartz sand and suggests potential venues for future developments, providing a valuable reference for the advancement of cost-effective, HMI-absorbing, surface-modified quartz sand filter media.

Facile Mesoporous Hollow Silica Synthesis for Formaldehyde Adsorption

Formaldehyde emitted from household products is classified as a hazardous substance that can adversely affect human health. Recently, various studies related to adsorption materials for reducing formaldehyde have been widely reported. In this study, mesoporous and mesoporous hollow silicas with amine functional groups introduced were utilized as adsorption materials for formaldehyde. Formaldehyde adsorption characteristics of mesoporous and mesoporous hollow silicas having well-developed pores were compared based on their synthesis methods-with or without a calcination process. Mesoporous hollow silica synthesized through a non-calcination process had the best formaldehyde adsorption characteristics, followed by mesoporous hollow silica synthesized through a calcination process and mesoporous silica. This is because a hollow structure has better adsorption properties than mesoporous silica due to large internal pores. The specific surface area of mesoporous hollow silica synthesized without a calcination process was also higher than that synthesized with a calcination process, leading to a better adsorption performance. This research suggests a facile synthetic method of mesoporous hollow silica and confirms its noticeable potential as a support for the adsorption of harmful gases.

Removal of p-cresol using wash waters from lipopeptide production

This work shows the efficiency of wash waters from lipopeptide production as a remediation strategy to treat urban water samples contaminated with p-cresol. The harvesting step in surfactin production involved a centrifugation step, generating a major soluble fraction and a fraction that is adsorbed to the biomass. The adsorbed fraction was recovered by washing steps. These wash waters containing lipopeptides (mostly surfactins), were successfully used to adsorb and solubilize p-cresol. The method of decontamination applied to an artificially contaminated natural water was monitored using a biosensor based on laccase/magnetic nanoparticles. Given the amount of surfactin within the wash water, the removal of p-cresol from artificially contaminated water was approximately 46.0%. This result confirms the successful and sustainable application of surfactin-rich wash waters to remove p-cresol from artificially contaminated natural water. The adsorption mechanism is potentially based on a multi-layer adsorption process, considering Langmuir and Freundlich adsorption isotherms.

A classic critique on concrete adsorbing pollutants emitted by automobiles and statistical envision using trend analysis

Globally, road transportation is responsible for about 1/3 of total air pollution, among which Co₂ , No_X and So_X are major by volume which are directly responsible for ozone layer depletion. As these activities continue to rise, the nature faces the threat of an unprecedented environmental catastrophe. In this survey, the adsorbent and the methods used to adsorb the vehicle emission pollutant directly from the ambient air and enhance the air quality are reviewed. There are extensive number of adsorbents available namely titanium oxide, polyethyleneimine (PEI), activated carbon, and other natural admixtures and methods that adsorb these pollutants such as Co₂; specifically, polyethyleneimine (PEI) is a polymer-based product which has a behavior of adsorbing Co₂ directly from ambient air. A carbon-neutral technology for eliminating anthropogenic CO₂ emissions has been proposed, trapping CO₂ from the atmosphere. The major concern including Co₂ adsorption rate and methods to evaluate the volume of adsorption with time has been reviewed. Trend analysis depends on the reason that can foresee what will occur later on by seeing what has happened beforehand. The trend analysis method was used in this study to model the adsorption rate of PEI based on their pore diameter. When it comes to designing regression analysis, R² values of 0.2 to 0.3 indicate that statistical tests have no meaningful impact and further research is needed. For adsorption of No_X, a lot of adsorbents are used namely sodium bentonite, zeolite, activated carbon, and other natural minerals. Among them, activated carbon enhances the adsorption rate of No_x. Vast research has been conducted to analyze the adsorption rate, advantages, disadvantages, and the behavior of different adsorbent with the concrete. Literally for SO_x, the adsorbents that are widely used are coal ash, copper oxide, and silicate. The characterization of different adsorbents with their adsorbate can be analyzed by some test methods as follows: Fourier-transform infrared spectroscopy (FTIR), BET analysis, scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM) analysis, surface area, X-ray diffraction (XRD), porosity analysis, and more according to the requirement. The quantity of adsorbent and adsorbate could be evaluated for facing the real-time constraints through a detailed research by review.

Studying the adsorption mechanisms of nanoplastics on covalent organic frameworks via molecular dynamics simulations

Covalent organic frameworks (COFs) with well-defined supramolecular structures and high surface-area-to-volume ratio have received extensive attention on their adsorption of contaminants from micro- to nano-size. Here, we studied the adsorption mechanisms of three typical nanoplastics (NP), including polyethylene (PE), nylon-6 (PA 6), and polyethylene terephthalate (PET) on chemically stable COFs (TpPa-X, X = H, CH₃, OH, NO₂ and F) by molecular dynamics simulations. Depending on molecular structure and surface composition, two distinct interactions-electrostatic interaction and van der Waals (vdW) interaction-are identified to be responsible for the adsorption of different NP pollutants on TpPa-X. The vdW interaction is dominant during the adsorption process, while polar groups in polymers and COFs can enhance the adsorption because of the electrostatic interaction. Compared with other functional COFs, we found that TpPa-OH shows the strongest adsorption with the NP pollutants employed in this study. This work reveals the COF-polymer adsorption behavior and properties at atomic scale, which is crucial to the development of promising COF materials to deal with NP pollution.

One-step fabrication of Pd-embedded hierarchically porous carbon micro-spheres for formaldehyde removal under mild conditions

Using the enclosed space of Pickering emulsion droplets as a template, we adopted a one-step strategy to prepare Pd and N co-doped multi-core layered porous carbon microspheres (Pd@NCMs-T) for room-temperature catalytic oxidation of HCHO.

Iron-Loaded Catalytic Silicate Adsorbents: Synthesis, Characterization, Electroregeneration and Application for Continuous Removal of 1-Butylpyridinium Chloride

This research proposes the application of iron-loaded sepiolite (S-Fe) as a catalytic adsorbent for the unreported 1-butylpyridinium chloride ([bpy] Cl) treatment in an aqueous medium. Initially, sepiolite was selected as an inexpensive and efficacious adsorbent for [bpy] Cl elimination. After that, sepiolite was loaded with iron for the subsequent electro-Fenton (EF) regeneration treatment. Once kinetic and isotherm studies were performed, providing respectively almost instantaneous adsorption (20 min) and an uptake of 22.85 mg/g, [bpy] Cl adsorption onto S-Fe was studied in continuous mode. The obtained breakthrough curve was analyzed using three standard breakthrough models, being Yoon–Nelson and Thomas the most suitable adjustments. Afterwards, S-Fe regeneration by the EF process was conducted using this iron-loaded silicate material as a heterogeneous catalyst. Under optimized operational conditions (current intensity 300 mA and Na2SO4 0.3 M), complete adsorbent regeneration was achieved in 10 h. The total mineralization of [bpy] Cl was reached within 24 h and among seven carboxylic acids detected, oxalic and acetic acids seem to be the primary carboxylic acids produced by [bpy] Cl degradation. Finally, S-Fe was efficiently used in four consecutive adsorption–regeneration cycles without a noticeable reduction in its adsorption capacity, opening a path for future uses.