Advantages of microwave-assisted synthesis of silica gels

Microwave-Assisted Synthesis of Iron-Based Aerogels with Tailored Textural and Morphological Properties

Iron aerogels have been synthesized by microwave heating for the first time. Therefore, it is essential to optimize this synthesis process to evaluate the possibility of obtaining nanometric materials with tailored properties and fitting them to the needs of different applications. Herein, the effect of the ratio between reagents and the time of synthesis on the final textural, morphological, and structural properties has been evaluated. The micro-meso-macroporosity of the samples can be tailored by modifying the ratio between reagents, whereas the time of synthesis has only a slight effect on the microporosity. Both the proportion between reagents and the time of synthesis are essential to controlling the nanometric morphology, making it possible to obtain either cluster- or flake-type structures. Regarding the chemical and structural composition, the samples are mainly composed of iron(II) and iron(III) oxides. However, the percentage of iron(II) can be modulated by changing the ratio between reagents, which implies that it is possible to obtain materials from highly magnetic materials to materials without magnetic properties. This control over the properties of iron aerogels opens a new line of opportunities for the use of this type of material in several fields of applications such as electrochemistry, electrocatalysis, and electrical and electronic engineering.

Role of Crystalline Si and SiC Species in the Performance of Reduced Hybrid C/Si Gels as Anodes for Lithium-Ion Batteries

In recent years, the research on lithium-ion batteries (LIBs) to improve their lifetime, efficiency and energy density has led to the use of silicon-based materials as a promising anode alternative to graphite. Specifically, crystalline silicon (cSi) and silicon carbide (SiC) obtained from deposition or reduction processes (e.g., magnesiothermal reduction) stand out for their electrochemical properties. However, the synthesis routes proposed until now have limitations that make them difficult to afford or operate on a large scale. For this reason, in this work, carbon-silicon (C-Si) hybrid materials synthesized through an efficient route are evaluated as the potential precursor for the obtention of both cSi and SiC species in a single material. The feasibility and influence of the magnesiothermal reduction process were evaluated, and materials with 10 wt.% of reduced Si and 10-26 wt.% of SiC were obtained. Both species play a role in the improvement of the performance of silicon-based materials as anodes in lithium-ion batteries. In comparison with materials obtained by the reduction of silica gels and composites, the reduced C-Si hybrid gels stand out thanks to the homogeneous distribution and stability of the species developed.

Highly Sensitive Electrochemical Sensor for Sunset Yellow Based on Electrochemically Activated Glassy Carbon Electrode

Electrochemically activated glassy carbon electrode (AGCE) was fabricated and applied for sensitive and selective detection of sunset yellow (SY). The electroanalysis of SY was investigated by square wave voltammetry (SWV). Owed to the specific oxygen-contained functional groups and the outstanding conductivity of AGCE, the proposed sensor exhibits an enhanced oxidation peak current of SY when compared with non-activated glass carbon electrode (GCE). Under the optimal analytical conditions, the oxidation peak current is linear with SY concentration in the range of 0.005–1.0 μM. The low limit of detection is 0.00167 μM (S/N = 3). This method is applied for the detection of SY in the actual samples. The recovery is between 96.19 and 103.47%, indicating that AGCE is suitable for the determination of SY in beverage sample.

Hybrid RF-Si Xerogels: A Cost-Effective Proposal for Insulator Materials

Hybrid xerogels RF/Si were synthesized by controlling the chemical variables involved in the polymerization process (i.e., molar ratios, dilution ratio, catalysts, etc.) and evaluated as insulator materials. Higher insulating performances were recorded for these hybrids compared with their counterparts made from only one of their components (i.e., RF or Si xerogels with similar porous characteristics). The analysis of chemical and structural features correlated with heat transfer methods was useful in understanding the sum of contributions involved in the thermal conductivity of RF/Si xerogels. Variables such as roughness and tortuosity can be used to improve the performance of xerogels from a different perspective. In this way, thermal conductivities of 25 mW/mK were achieved without lengthy process steps or special drying methods. Knowledge of material design and the use of microwave heating during the synthesis allowed us to approach a simple and cost-effective process. These results suggest that the hybrid materials developed in this work are a good starting point for the future of the massive production of insulation materials.

Novel Organochlorinated Xerogels: From Microporous Materials to Ordered Domains

Hybrid silica xerogels combine the properties of organic and inorganic components in the same material, making them highly promising and versatile candidates for multiple applications. They can be tailored for specific purposes through chemical modifications, and the consequent changes in their structures warrant in-depth investigation. We describe the synthesis of three new series of organochlorinated xerogels prepared by co-condensation of tetraethyl orthosilicate (TEOS) and chloroalkyltriethoxysilane (ClRTEOS; R = methyl [M], ethyl [E], or propyl [P]) at different molar ratios. The influence of the precursors on the morphological and textural properties of the xerogels was studied using ²⁹Si NMR (Nuclear Magnetic Resonance), FTIR (Fourier-Transform Infrared Spectroscopy), N₂, and CO₂ adsorption, XRD (X-ray Diffraction), and FE-SEM (Field-Emission Scanning Electron Microscopy). The structure and morphology of these materials are closely related to the nature and amount of the precursor, and their microporosity increases proportionally to the molar percentage of ClRTEOS. In addition, the influence of the chlorine atom was investigated through comparison with their non-chlorinated analogues (RTEOS, R = M, E, or P) prepared in previous studies. The results showed that a smaller amount of precursor was needed to detect ordered domains (ladders and T₈ cages) in the local structure. The possibility of coupling self-organization with tailored porosity opens the way to novel applications for this type of organically modified silicates.