An O- modified coordination polymer for rapid and selective adsorption of rare earth elements from aqueous solution

Overview of Functionalized Porous Materials for Rare-Earth Element Separation and Recovery

The exceptional photoelectromagnetic characteristics of rare-earth elements contribute significantly to their indispensable position in the high-tech industry. The exponential expansion of the demand for high-purity rare earth and related compounds can be attributed to the swift advancement of contemporary technology. Nevertheless, rare-earth elements are finite and limited resources, and their excessive mining unavoidably results in resource depletion and environmental degradation. Hence, it is crucial to establish a highly effective approach for the extraction and reclamation of rare-earth elements. Adsorption is regarded as a promising technique for the recovery of rare-earth elements owing to its simplicity, environmentally friendly nature, and cost-effectiveness. The efficacy of adsorption is contingent upon the performance characteristics of the adsorbent material. Presently, there is a prevalent utilization of porous adsorbent materials with substantial specific surface areas and plentiful surface functional groups in the realm of selectively separating and recovering rare-earth elements. This paper presents a thorough examination of porous inorganic carbon materials, porous inorganic silicon materials, porous organic polymers, and metal-organic framework materials. The adsorption performance and processes for rare-earth elements are the focal points of discussion about these materials. Furthermore, this work investigates the potential applications of porous materials in the domain of the adsorption of rare-earth elements.

Two novel nitrogen-rich metal-organic nanotubes: syntheses, structures and selective adsorption toward rare earth ions

The construction and development of metal-organic nanotubes (MONTs) with nanoscale interior channel diameters for potential applications is of great interest. An angular nitrogen-rich ligand, 3,6-bis(2-ethylimidazole)-2-methylpyrimidine (beim-CH3), was designed to construct MONTs by coupling with the V-shaped carboxylate ligands of benzophenone 4,4'-dicarboxylic acid (H2bpndc) and 4,4'-oxybisbenzoic acid (H2obba). Two new MONTs were synthesized and named NCD-166 ([Zn(bpndc)(beim-CH3)]·H2O) and NCD-167 ([Zn(obba)(beim-CH3)]·H2O), and they were isostructural and have almost identical tube inner diameters of approximately 1.76 nm. Benefiting from the abundantly exposed nitrogen and oxygen atoms in their tube walls and open nanoporous channels, they display superior adsorption capacities for Eu3+ (150.90 mg g-1) and high adsorption selectivity (>96%) in the low-concentration solutions. Additionally, it was revealed that the adsorption effect of ether oxygen on rare earth elements was significantly better than that of carbonyl oxygen. The adsorption isotherm conformed to the Langmuir model and the adsorption kinetics obeyed the pseudo-second-order model. These results clearly indicate that such novel MONTs are favorable sorbents for REEs.

Highly efficient removal of rare earth elements by two-dimensional titanium carbide nanosheets as impacted via water chemistry

The separation and recycling of rare earth elements (REEs) are very important owing to the high demand, limited resource, specific usages, and environmental issues. In this work, two-dimensional Ti3C2Tx MXene was introduced to remove REEs (Nd(III) and La(III)) from water, and its physicochemical properties were conducted by HRTEM, SEM-EDS, XRD, FTIR, and XPS. Various parameters, such as initial pH, REEs initial concentration, contact time, and temperature, were investigated by batch experiment, respectively. Furthermore, the adsorption kinetic and isotherm were examined to analyze the adsorption behavior and adsorption mechanism. Nd(III) and La(III) have a good affinity with Ti3C2Tx MXene surface functional groups (-F, -OH, and containing oxygen groups). The maximum adsorption capacities of Ti3C2Tx MXene for Nd(III) and La(III) were 229.85 mg/g and 175.83 mg/g at T = 333 K, respectively. The adsorption data of Nd(III) on Ti3C2Tx MXene fitted well with the Freundlich isotherms model and pseudo-second-order kinetic model. However, the best fitting for La(III) adsorption on Ti3C2Tx MXene was described by both pseudo-first-order and pseudo-second-order model. Thermodynamic study of Nd(III) and La(III) adsorption on Ti3C2Tx MXene showed that the reaction was a spontaneous and endothermic process. These results indicated Ti3C2Tx MXene had a great potential in extracting REEs from an aqueous solution.

Tuning the photoelectric response of pyrene-based coordination polymers by optimizing charge transfer

Three π–π stacked CPs were designed and synthesized for application of photoelectric response. The effect of charge transfer on the photoelectric properties is explored by adjusting the composition and π-stacking fashion of the CPs.