Efficient extraction of Rb+ and Cs+ by a precipitation flotation process with ammonium phosphowolframate as precipitant

Highly selective ion precipitation flotation for ternary Co-Zn-Mn separation: Stepwise chelation capture of Co and Zn from simulated zinc hydrometallurgy wastewater

Ion precipitation flotation technology was demonstrated to be an efficient method for the separation of valuable metals from low-concentration solution. However, the selective separation of three metals from mixing solution is a great challenge, and highly selective reagents are the key to polymetallic separation. In this work, stepwise separation of Co and Zn from the simulated zinc hydrometallurgy wastewater containing ternary Co-Zn-Mn metals by ion precipitation flotation process was proposed. It's demonstrated that organic reagents of 1-nitroso-2-naphthol (NN) and sodium dimethyldithiocarbamate (SDDC) had excellent selectivity for the capture of Co and Zn to form respective precipitate from wastewaters via the chelation reactions. After precipitation, dodecylpyridinium chloride (DPC) and tetradecyltrimethylammonium bromide (TTAB) were chosen as surfactants for the separation of Co and Zn sediments from the solution via the flotation process. The effects of solution pH, molar ratio, reaction temperature, and reaction time on the selective precipitation efficiencies of Co and Zn as well as the effects of surfactant dosage and flotation gas velocity on the flotation separation efficiencies were systematically investigated. It's demonstrated that the comprehensive recovery rates of Co, Mn, and Zn reach 98%, 90%, and 99%, respectively. After separation, oxidation calcination of the foam products was conducted to prepare high-purity Co3O4 and ZnO nanoparticles in which the organic matters were burnt out with gas emissions. The stepwise chelation capture mechanisms of Co and Zn by highly selective precipitation reagents were minutely discussed. It's demonstrated that the proposed selective stepwise precipitation and flotation method is suitable for recovery of critical metal ions from low-concentration polymetallic wastewaters.

Additive manufacturing of geopolymers with hierarchical porosity for highly efficient removal of Cs. JOURNAL OF HAZARDOUS MATERIALS 2023;443:130161. [PMID: 36327833 DOI: 10.1016/j.jhazmat.2022.130161]

Geopolymers (GPs) have emerged as promising adsorbents for wastewater treatment due to their superior adsorption stability, tunable porosity, high adsorption capacity, and low-energy production. Despite their great promise, developing GPs with well-controlled hierarchical structures and high porosity remains challenging, and the mechanism underlying the ion adsorption process remains elusive. Here we report a cost-effective and universal approach to fabricate Na or K GPs with sophisticated architectures, high porosity, and arbitrary cation species exchange by means of additive manufacturing and a surfactant. The introduction of sodium lauryl sulfate (SLS) enhanced the porosity of the GP adsorbents, yielding NaGP-lattice-10%SLS adsorbent with a high total porosity of 80.8 vol%. Combining static and dynamic adsorption tests, the effects of morphology, surfactant content, and cation species on Cs⁺ adsorption performance were systemically investigated. With an initial Cs⁺ concentration of 900 mg/L, the printed NaGP exhibited a maximum Cs⁺ adsorption capacity of 80.1 mg/g, outperforming other adsorbents reported so far. The quasi-second-order fit of the NaGP adsorbent showed overall higher R² values than the quasi-first-order fit, indicating that the adsorption process was dominated by ion exchange. Combined with first-principles calculations, we verified that the content of water in the GP sod cages also affected the ion-exchange process between Na⁺ and Cs⁺.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Structural Investigation on the Efficient Capture of Cs+ and Sr2+ by a Microporous Cd-Sn-Se Ion Exchanger Constructed from Mono-Lacunary Supertetrahedral Clusters

Visualization of the ion exchange mechanism for 137Cs and 90Sr decontamination bears significance for safe radioactive liquid waste reprocessing and emergency response enhancement to nuclear accident. Here, the remediation of...

Removal of Fe(III), Cd(II), and Zn(II) as Hydroxides by Precipitation–Flotation System

In this paper, a combined precipitation–flotation system is proposed for the removal of Fe(III), Zn(II), and Cd(II) as hydroxides. The efficiency of precipitation, as a function of pH, metal ion concentration, and dosage of the precipitating agent as the main variables, was evaluated. The results showed that 99% efficiency was attained from a mixture solution containing the three metal ions in sulfate media at pH 10.3 after 15 min of treatment. The sedimentation behavior showed that a larger precipitate facilitated solid/liquid separation at 30 min. The characterization of precipitates was performed by X-ray diffraction (XRD) identifying iron, zinc, and cadmium oxides; hydroxides; and sodium sulfate. For the flotation, a 20 mg/L solution of dodecylamine (DDA) was used as a collector. Such a solution allowed for the removal of 76% of precipitates in concentrate. An increase in the collector concentration diminished the float percentage due to the micelle formation and low adsorption of the collector on the surface of the precipitate. The results provide evidence of the effectivity of the removal of metal ions by the combined precipitation–flotation system as an alternative for the treatment of acid mine drainage (AMD) in less time in comparison with a sedimentation stage.