Critical bubble diameters and Plateau border dimensions for drainage in aqueous xanthan foams

Enhanced rheology and firefighting performance of fluorine-free soft foams through the assembly of cellulose nanofibres and cellulose nanocrystals at the air-liquid interface

In this work, we developed soft and highly stable perfluorocarbon-free foams based on cellulose nanofibres (CNFs), cellulose nanocrystals (CNCs) and alkyl polyglycoside (APG). Neither the CNCs nor the CNFs can effectively stabilise the APG foam, which is reflected in the spontaneous degradation of the foam. Interestingly, blending these two nanocelluloses and foaming resulted in an ultrastable foam. The reflective optical interference technique was used to visualise liquid flow in the liquid film, and the results showed that the foam film with a thickness of only a few tens of nanometres gained excellent mechanical stability by tuning the assembly of CNCs and CNFs at the air-liquid interface. Moreover, the interfibril interactions at the Plateau borders reduce the bubble coarsening rate and drainage rate. In pool fire extinguishing tests, increasing the total concentration of CNCs and CNFs improved the foam stability, but increasing the viscosity led to a decrease in the foam spreading rate. Thus, a formulation with 0.4 % nanocellulose has poorer firefighting performance than a formulation with 0.15 % nanocellulose. When the ratios of CNCs and CNFs are properly controlled, the burnback performance of perfluorocarbon-free foam is better than that of state-of-the-art fluorinated AFFFs for n-heptane pool fires. The sustainability of the firefighting process is considerably improved by switching to the nonperfluorinated liquid foam developed in this work.

Foam Stabilization Process for Nano-Al2O3 and Its Effect on Mechanical Properties of Foamed Concrete

Foamed concrete is increasingly utilized in engineering due to its light weight, excellent thermal insulation, fire resistance, etc. However, its low strength has always been the most crucial factor limiting its large-scale application. This study introduced an innovative method to enhance the strength of foamed concrete by using nano-Al2O3 (NA) as a foam stabilizer. NA was introduced into a foaming agent containing sodium dodecyl sulfate (SDS) and hydroxypropyl methylcellulose (HPMC) to prepare a highly stable foam. This approach significantly improved the foam stability and the strength of foamed concrete. Its drainage volume, settlement distance, microstructure, and stabilizing action were investigated, along with the strength, microstructure, and hydration products of foamed concrete. The presence of NA effectively reduced the drainage volume and settlement distance of the foam. NA is distributed at the gas-liquid interface and within the liquid film to play a hindering role, increasing the thickness of the liquid film, delaying the liquid discharge rate from the liquid film, and hindering bubble aggregation, thereby enhancing foam stability. Additionally, due to the stabilizing effect of NA on the foam, the precast foam forms a fine and uniform pore structure in the hardened foamed concrete. At 28 d, the compressive strength of FC0 (0% NAs in foam) is 2.18 MPa, while that of FC3 (0.18% NAs in foam) is 3.90 MPa, increased by 79%. The reason for this is that NA promotes the formation of AFt, and its secondary hydration leads to the continuous consumption of Ca(OH)2, resulting in a more complete hydration reaction. This study presents a novel method for significantly improving the performance of foamed concrete by incorporating NA.