A new method of Cr(VI) reduction using SiC doped carbon electrode and Cr(III) recovery by hydrothermal precipitation

Aluminum-Porphyrin Metal-Organic Frameworks for Visible-Light Photocatalytic and Sonophotocatalytic Cr(VI) Reduction

In this study, four isostructural aluminum-based porphyrin metal-organic frameworks [Al-TCPP(M), M = H2 and Zn] with different morphologies and sizes were synthesized by the hydrothermal method. By adjusting the hydrothermal reaction time and the types of porphyrin ligands, Al-TCPP(M) MOFs exhibited diverse morphologies including tetragonal, rectangular, and carambola-like phase. In view of the introduction of porphyrin ligands and the strong coordination effect of Al-O units, Al-TCPP(M) MOFs exhibited good chemical stability, broad visible light harvesting capability, and fast photogenerated charge response. Four Al-TCPP(M) MOFs exhibited excellent photocatalytic activities for Cr(VI) in aqueous solution. Notably, the regulation to the nanoscale carambola-like morphology of Al-TCPP MOFs and metallization of the porphyrin ligand promoted the Cr(VI) photoreduction reaction where the catalytic activity of metallic carambola-like Al-TCPP increased 1.7 times compared to that of nonmetallic tetragonal MOFs. With the assistance of sonophotocatalysis, the Cr(VI) average reduction rates reached 0.658, 0.542, 0.785, and 0.629 mg·L-1·min-1 for Al-TCPP(H2)-24h, Al-TCPP(H2)-72h, Al-TCPP(Zn)-24h, and Al-TCPP(Zn)-72h, which are 1.2-1.4 times higher than that of photocatalysis. UV-vis absorption spectroscopy, electronic spin resonance, and fluorescence spectroscopy experiments demonstrated that the synergistic effect of photochemistry and sonochemistry promoted the transfer of photogenerated electrons from Al-TCPP(M) to Cr(VI), thus enhancing the catalytic activity. The combination of the sonophotocatalytic technology with aluminum-porphyrin MOFs may become an effective strategy to improve MOF-based photocatalytic systems.

Chromium removal at neutral pHs via electrochemical Cr(VI) reduction and subsequent Cr(III) adsorption with MoS2 nanoflowers-modified graphite felt

The operation performance and stability of electrochemical Cr(VI) reduction are strongly restricted at neutral pHs (e.g., drinking water and groundwater) by the high Cr(VI) oxidation potentials and cathode passivation of Cr(OH)₃ precipitates. Herein, we fabricated MoS₂ nanoflowers-modified graphite felt (GF-MoS₂) to construct the electrochemical apparatus (EA) and adsorption column (AC), attempting to stable and effective Cr(VI) removal at neutral pHs via electrochemical Cr(VI) reduction and subsequent Cr(III) adsorption. In EA with a sequential oxidation-reduction process, Cr(VI)-contaminated influent (5 mg/L) at neutral pHs (6.0-8.0) was oxidized first by anode to generate large amounts of H⁺ ions via H₂O oxidation, decreasing the pH of anode-oxidized influent to ∼2.5 at 2.6 V and 1000 L/m²/h. Subsequently, the acidic anode-oxidized influent was further reduced by GF-MoS₂ cathode, promoting significantly Cr(VI) reduction via decreasing Cr(VI) oxidation potentials and alleviating Cr(III) precipitation on cathode. These results enabled the stable and effective operation of GF-MoS₂-based EA with almost Cr(VI) reduction to Cr(III). With further assembling GF-MoS₂-based AC, Cr(III) species in EA effluent were easily adsorbed or intercepted by GF-MoS₂, achieving undetectable Cr species in AC effluent. Combination techniques of GF-MoS₂-based electrochemical reduction and adsorption can be an effective approach for remediating Cr(VI)-contaminated water at neutral pHs.

Quantum dot-doped CeOx-NiB with modulated electron density as a highly efficient bifunctional electrocatalyst for water splitting

Development of economical, efficient and durable non-noble metal electrocatalysts for the hydrogen/oxygen evolution reaction (HER/OER) holds great promise, but still faces great challenges. Herein, a strategy of doping metal borides with rare earth metal oxides and introducing silicon carbide (SiC) quantum dots has been explored to develop efficient bifunctional electrocatalysts. A novel electrocatalyst consists of SiC quantum dot-decorated CeO_x-NiB supported on nickel foam via a one-step mild electroless plating reaction (denoted as CeO_x-NiB/SiC@NF). Notably, the modulated electron density of the CeO_x-NiB/SiC@NF electrode significantly boosts the electrochemically active surface area and electron transfer, and optimizes the hydrogen/water absorption free energy, which delivers current densities of 50 mA cm^-2 and 10 mA cm^-2 at overpotentials of only 131 mV and 234 mV for the HER and the OER, respectively. The target electrode requires only 1.43 V to provide 10 mA cm^-2 for overall water splitting in 1.0 M KOH. Moreover, the electrode also exhibits good stability and durability at the industrial-grade current density (0.5-1 A cm^-2). This work provides a new idea for the development of efficient and durable non-precious metal catalysts.

A novel biochar electrode for efficient electroreduction of nitrate: Selective and regulation of halogen

A novel biochar electrode Bio-Fe₃O₄/CF used for electroreduction of nitrate was prepared by the hydrothermal synthesis method. The results showed that the growth of spherical Fe₃O₄ on the surface of smooth biochar can significantly increase the nitrate reduction rate. Besides, the presence of Cl and Br in the solution could promote the conversion of NH₄⁺ to N₂, thereby regulating the element nitrogen in the solution. Mechanistic analysis showed that the interconversion of Fe (II) and Fe (III) facilitates the transfer of electrons to nitrate. This study not only provides a biochar electrode material for the efficient removal of nitrate but also simply reveals regulation of halogen in solution, which provides a particular theoretical and data basis for nitrate removal.

Biomass-derived carbon-based and silica-based materials for catalytic and adsorptive applications- An update since 2010

Biomass, which defined as plant- or animal-based materials, is intriguing tremendous scientific attentions due to its renewable attribute in serving energy security. Amongst, the plant-based biomasses, particularly those that co-generated in the agriculture activities, are commonly regarded as fuel for burning, which overlooked their hidden potentials for high-end applications. Organically, the plant-based biomass constitutes of lignocellulose components, which can be served as promising precursors for functionalized carbon materials. Meanwhile, its inorganic counterpart made up of various minerals, with Si being the most concerned one. With the advancement of biomass technologies and material synthesis in recent years, numerous attempts were endeavoured to obtain valorised products from biomass. Particularly, syntheses of catalytic and adsorptive materials are actively researched in the field of biomass reutilization. Herein, our work systematically summarized the advancements of biomass-materials for these applications in recent 10 years (2010-2020), with a special focus on the carbon-based and Si-based catalytic/adsorptive materials. Significantly, the deriving steps, inclusive of both pre-treatment and post-treatment of such materials, are incorporated in the discussion, alongside with their significances revealed too. The performance of the as-obtained materials in the respective application is systematically correlated to their physicochemical properties, hence providing valuable insights to the readers. Challenges and promising directions to be explored are raised too at the end of the review, aiming to advocate better-usage of biomass while offering great opportunities to sustain catalysis and adsorption in the industrial scale.

Facile Synthesis of Polyethylene Glycol@Tannin-Amine Microsphere towards Cr(VI) Removal

Herein, a synthetic strategy for a rough microsphere Cr(VI)-adsorbent via the reaction of tannic acid (TA) and 1,6-hexanediamine (HA) and using polyethylene glycol (PEG) as surface modifier was presented. This adsorbent was characterized by a Fourier Transform Infrared spectrometer (FTIR), thermogravimetic analysis (TGA), X-ray photoelectron spectroscopy (XPS), etc. Certain factors, including contact time, PEG@poly(tannin-1,6-hexanediamine) (PEG@PTHA) dosage, initial concentration, and experimental temperature affecting the Cr(VI) adsorption performance of adsorbent were explored. PEG@PTHA can adsorb Cr and the Cr(VI) was reduced up to Cr(III) due to the existence of phenolic hydroxyl groups. Its adsorption capacity can reach up to 300 mg/g within 10 min and approximately 100% removal percentage below the initial concentration of 100 mg/L. Its behavior matched well with the Langmuir isotherm model and pseudo-second-order kinetic model. A PEG@PTHA adsorbent with maximum adsorption capacity (450 mg/g) has great prospects in Cr(VI)-sewage treatment.